From: "Błażej Szajrych" <bs@macrix.pl>
To: <linux-wireless@vger.kernel.org>, <backports@vger.kernel.org>
Cc: <daw@macrix.pl>, <pg@macrix.de>
Subject: ADHOC issue with WL12xx driver
Date: Wed, 26 Jun 2013 08:50:08 +0200 [thread overview]
Message-ID: <007501ce7239$65e40df0$31ac29d0$@macrix.pl> (raw)
[-- Attachment #1: Type: text/plain, Size: 1735 bytes --]
Hi,
We are encountering serious AD-HOC problems:
. Commands are run successfully
. The network is theoretically created
. It is not visible for other devices and the DMESG show that an error
occurs and the firmware reboots
More info:
. The box running Linux is the VAR SOM OM44
. The operation system we are using is Ubuntu 12.04 LTS on the
3.4.0-1490-omap4 kernel.
. The processor is in the ARM architecture.
. WiFi card: Murata LBEH59XUHC.
. WiFi driver: wl12xx, wlcore firmware wl127x-fw-5-sr.bin with Rev
6.3.10.0.135.
. Network connection through the router is working. Network manager is
used to configure the connection.
. Ad-hoc mode connection is not working - the network is not visible
to other computers.
Commands used to configure the network in adhoc mode are as follows (wlan0
is the WiFi interface name):
1. Using iw:
. ifconfig wlan0 down
. iw wlan0 set type ibss
. ifconfig wlan0 up
. iw wlan0 ibss join ADHOC_TEST 2437
2. Using iwconfig
. ifconfig wlan0 down
. iwconfig wlan0 mode ad-hoc
. iwconfig wlan0 channel 6
. iwconfig wlan0 essid ADHOC_TEST
. ifconfig wlan0 up
Attached you will find the dmesg messages (dmesg.txt).
Using the latest backport of Compat Wireless backports-3.10-rc1-2 did not
help.
Testing with different WiFI dongles gave different results.
TP Link WN725N that uses the Realtek 8192cu driver and is based on the
RTL8188CUS-GR chipset is working correctly in AD-HOC mode.
Could you guide us in anyway in resolving this issue?
Pozdrawiam, Best Regards,
Błażej Szajrych
Software Developer
+48 669 710 648
Macrix Polska Sp. Z o. o. Sp. K.
ul. Podlaska 15
PL 60-623 Poznan
tel.: +48 61 865 47 23
fax: +48 61 865 47 24
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 7493 bytes --]
[ 5138.270751] ---[ end trace da227214a8249879 ]---
[ 5138.270782] wlcore: ERROR failed to initiate cmd role enable
[ 5138.278594] wlcore: WARNING cmd join failed -110
[ 5138.278625] wlcore: Reading FW panic log
[ 5138.278625] ------------[ cut here ]------------
[ 5138.278686] WARNING: at /home/variscite/Downloads/backports-3.10-rc1-2/drivers/net/wireless/ti/wlcore/cmd.c:63 wlcore_cmd_send_failsafe+0x40/0x3a0 [wlcore]()
[ 5138.278686] Modules linked in: rtl8192c_common(O) rtlwifi(O) 8192cu(O) omapdrm_pvr(O) wl12xx(O) wlcore(O) mac80211(O) cfg80211(O) joydev omapdce(C) rpmsg_omx bnep(O) omaprpc(C) rfcomm(O) omap_remoteproc rpmsg_resmgr_common ppdev remoteproc bluetooth(O) omap_rpmsg_resmgr rpmsg_resmgr virtio_rpmsg_bus lp virtio virtio_ring parport dm_multipath at24 wlcore_sdio(O) compat(O) hid_apple usbhid hid dm_mirror dm_region_hash dm_log btrfs zlib_deflate libcrc32c
[ 5138.278778] [<c001bc38>] (unwind_backtrace+0x0/0xec) from [<c05accd0>] (dump_stack+0x20/0x24)
[ 5138.278808] [<c05accd0>] (dump_stack+0x20/0x24) from [<c00458d4>] (warn_slowpath_common+0x5c/0x74)
[ 5138.278808] [<c00458d4>] (warn_slowpath_common+0x5c/0x74) from [<c0045918>] (warn_slowpath_null+0x2c/0x34)
[ 5138.278839] [<c0045918>] (warn_slowpath_null+0x2c/0x34) from [<bf40c304>] (wlcore_cmd_send_failsafe+0x40/0x3a0 [wlcore])
[ 5138.278900] [<bf40c304>] (wlcore_cmd_send_failsafe+0x40/0x3a0 [wlcore]) from [<bf40c690>] (wl1271_cmd_send+0x2c/0x38 [wlcore])
[ 5138.278930] [<bf40c690>] (wl1271_cmd_send+0x2c/0x38 [wlcore]) from [<bf40edf4>] (wl12xx_cmd_stop_fwlog+0x7c/0xb8 [wlcore])
[ 5138.278991] [<bf40edf4>] (wl12xx_cmd_stop_fwlog+0x7c/0xb8 [wlcore]) from [<bf409908>] (wl1271_recovery_work+0xcc/0x3ac [wlcore])
[ 5138.279022] [<bf409908>] (wl1271_recovery_work+0xcc/0x3ac [wlcore]) from [<c0061d0c>] (process_one_work+0x294/0x48c)
[ 5138.279022] [<c0061d0c>] (process_one_work+0x294/0x48c) from [<c0062214>] (worker_thread+0x144/0x240)
[ 5138.279052] [<c0062214>] (worker_thread+0x144/0x240) from [<c0067090>] (kthread+0x9c/0xa8)
[ 5138.279052] [<c0067090>] (kthread+0x9c/0xa8) from [<c00144a4>] (kernel_thread_exit+0x0/0x8)
[ 5138.279052] ---[ end trace da227214a824987a ]---
[ 5138.279083] ------------[ cut here ]------------
[ 5138.279083] WARNING: at /home/variscite/Downloads/backports-3.10-rc1-2/drivers/net/wireless/ti/wlcore/main.c:790 wl12xx_queue_recovery_work+0x30/0x6c [wlcore]()
[ 5138.279113] Modules linked in: rtl8192c_common(O) rtlwifi(O) 8192cu(O) omapdrm_pvr(O) wl12xx(O) wlcore(O) mac80211(O) cfg80211(O) joydev omapdce(C) rpmsg_omx bnep(O) omaprpc(C) rfcomm(O) omap_remoteproc rpmsg_resmgr_common ppdev remoteproc bluetooth(O) omap_rpmsg_resmgr rpmsg_resmgr virtio_rpmsg_bus lp virtio virtio_ring parport dm_multipath at24 wlcore_sdio(O) compat(O) hid_apple usbhid hid dm_mirror dm_region_hash dm_log btrfs zlib_deflate libcrc32c
[ 5138.279205] [<c001bc38>] (unwind_backtrace+0x0/0xec) from [<c05accd0>] (dump_stack+0x20/0x24)
[ 5138.279205] [<c05accd0>] (dump_stack+0x20/0x24) from [<c00458d4>] (warn_slowpath_common+0x5c/0x74)
[ 5138.279235] [<c00458d4>] (warn_slowpath_common+0x5c/0x74) from [<c0045918>] (warn_slowpath_null+0x2c/0x34)
[ 5138.279266] [<c0045918>] (warn_slowpath_null+0x2c/0x34) from [<bf4093f8>] (wl12xx_queue_recovery_work+0x30/0x6c [wlcore])
[ 5138.279296] [<bf4093f8>] (wl12xx_queue_recovery_work+0x30/0x6c [wlcore]) from [<bf40c644>] (wlcore_cmd_send_failsafe+0x380/0x3a0 [wlcore])
[ 5138.279357] [<bf40c644>] (wlcore_cmd_send_failsafe+0x380/0x3a0 [wlcore]) from [<bf40c690>] (wl1271_cmd_send+0x2c/0x38 [wlcore])
[ 5138.279388] [<bf40c690>] (wl1271_cmd_send+0x2c/0x38 [wlcore]) from [<bf40edf4>] (wl12xx_cmd_stop_fwlog+0x7c/0xb8 [wlcore])
[ 5138.279418] [<bf40edf4>] (wl12xx_cmd_stop_fwlog+0x7c/0xb8 [wlcore]) from [<bf409908>] (wl1271_recovery_work+0xcc/0x3ac [wlcore])
[ 5138.279449] [<bf409908>] (wl1271_recovery_work+0xcc/0x3ac [wlcore]) from [<c0061d0c>] (process_one_work+0x294/0x48c)
[ 5138.279479] [<c0061d0c>] (process_one_work+0x294/0x48c) from [<c0062214>] (worker_thread+0x144/0x240)
[ 5138.279479] [<c0062214>] (worker_thread+0x144/0x240) from [<c0067090>] (kthread+0x9c/0xa8)
[ 5138.279510] [<c0067090>] (kthread+0x9c/0xa8) from [<c00144a4>] (kernel_thread_exit+0x0/0x8)
[ 5138.279510] ---[ end trace da227214a824987b ]---
[ 5138.279510] wlcore: ERROR failed to send stop firmware logger command
[ 5138.289611] wlcore: Hardware recovery in progress. FW ver: Rev 6.3.10.0.133
[ 5138.289916] wlcore: pc: 0x1b6d6, hint_sts: 0x00000000 count: 574
[ 5138.290161] wlcore: down
[ 5138.292236] ieee80211 phy0: Hardware restart was requested
[ 5138.876770] wlcore: firmware booted (Rev 6.3.10.0.133)
[ 5140.889648] wlcore: ERROR command complete timeout
[ 5140.894653] ------------[ cut here ]------------
[ 5140.894714] WARNING: at /home/variscite/Downloads/backports-3.10-rc1-2/drivers/net/wireless/ti/wlcore/main.c:790 wl12xx_queue_recovery_work+0x30/0x6c [wlcore]()
[ 5140.894714] Modules linked in: rtl8192c_common(O) rtlwifi(O) 8192cu(O) omapdrm_pvr(O) wl12xx(O) wlcore(O) mac80211(O) cfg80211(O) joydev omapdce(C) rpmsg_omx bnep(O) omaprpc(C) rfcomm(O) omap_remoteproc rpmsg_resmgr_common ppdev remoteproc bluetooth(O) omap_rpmsg_resmgr rpmsg_resmgr virtio_rpmsg_bus lp virtio virtio_ring parport dm_multipath at24 wlcore_sdio(O) compat(O) hid_apple usbhid hid dm_mirror dm_region_hash dm_log btrfs zlib_deflate libcrc32c
[ 5140.894836] [<c001bc38>] (unwind_backtrace+0x0/0xec) from [<c05accd0>] (dump_stack+0x20/0x24)
[ 5140.894866] [<c05accd0>] (dump_stack+0x20/0x24) from [<c00458d4>] (warn_slowpath_common+0x5c/0x74)
[ 5140.894866] [<c00458d4>] (warn_slowpath_common+0x5c/0x74) from [<c0045918>] (warn_slowpath_null+0x2c/0x34)
[ 5140.894897] [<c0045918>] (warn_slowpath_null+0x2c/0x34) from [<bf4093f8>] (wl12xx_queue_recovery_work+0x30/0x6c [wlcore])
[ 5140.894958] [<bf4093f8>] (wl12xx_queue_recovery_work+0x30/0x6c [wlcore]) from [<bf40c644>] (wlcore_cmd_send_failsafe+0x380/0x3a0 [wlcore])
[ 5140.894989] [<bf40c644>] (wlcore_cmd_send_failsafe+0x380/0x3a0 [wlcore]) from [<bf40c690>] (wl1271_cmd_send+0x2c/0x38 [wlcore])
[ 5140.895050] [<bf40c690>] (wl1271_cmd_send+0x2c/0x38 [wlcore]) from [<bf40d6a0>] (wl12xx_cmd_role_start_ibss+0x174/0x1c8 [wlcore])
[ 5140.895080] [<bf40d6a0>] (wl12xx_cmd_role_start_ibss+0x174/0x1c8 [wlcore]) from [<bf407e88>] (wl1271_op_bss_info_changed+0x834/0xcb4 [wlcore])
[ 5140.895202] [<bf407e88>] (wl1271_op_bss_info_changed+0x834/0xcb4 [wlcore]) from [<bf345be0>] (ieee80211_bss_info_change_notify+0x198/0x240 [mac80211])
[ 5140.895416] [<bf345be0>] (ieee80211_bss_info_change_notify+0x198/0x240 [mac80211]) from [<bf36db98>] (ieee80211_reconfig+0x1630/0x1e18 [mac80211])
[ 5140.895568] [<bf36db98>] (ieee80211_reconfig+0x1630/0x1e18 [mac80211]) from [<bf34518c>] (ieee80211_restart_work+0x80/0x94 [mac80211])
[ 5140.895660] [<bf34518c>] (ieee80211_restart_work+0x80/0x94 [mac80211]) from [<c0061d0c>] (process_one_work+0x294/0x48c)
[ 5140.895690] [<c0061d0c>] (process_one_work+0x294/0x48c) from [<c0062214>] (worker_thread+0x144/0x240)
[ 5140.895690] [<c0062214>] (worker_thread+0x144/0x240) from [<c0067090>] (kthread+0x9c/0xa8)
[ 5140.895721] [<c0067090>] (kthread+0x9c/0xa8) from [<c00144a4>] (kernel_thread_exit+0x0/0x8)
[ 5140.895721] ---[ end trace da227214a824987c ]---
[ 5140.895751] wlcore: ERROR failed to initiate cmd role enable
[ 5140.903717] wlcore: WARNING cmd join failed -110
[ 5140.903778] wlcore: Reading FW panic log
reply other threads:[~2013-06-26 6:50 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='007501ce7239$65e40df0$31ac29d0$@macrix.pl' \
--to=bs@macrix.pl \
--cc=backports@vger.kernel.org \
--cc=daw@macrix.pl \
--cc=linux-wireless@vger.kernel.org \
--cc=pg@macrix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).