Re: prism54pci fails to read eeprom on PowerPC, then bugs in pci code

[Pavel Roskin <proski@gnu.org>]

On Sat, 2007-03-17 at 00:37 -0400, Michael Wu wrote:
> On Friday 16 March 2007 23:46, Paul TBBle Hampson wrote:
> > The (built-in) bcm43xx-mac80211 driver works, but when I try to load a
> > CardBus Atheros card I've got lying around with dadwifi-openhal, it
> > fails with some sort of hardware error.  (ie. it _might_ be a dodgey
> > Cardbus port, although both cardbus cards used to work in this machine,
> > using prism54 hardmac and the dadwifi with atheros hal driver
> > respectively)
> >
> Can you rule out the port first? Load the fullmac driver first, bring it up & 
> down, unload it, and then try p54.

Oh, and I'm amazed that somebody is using dadwifi-openhal verify the
hardware!  It's in a pretty poor shape right now.  It prints some
warnings because it starts with channel 0.  The interface can be brought
up if you set a valid channel, and I think it might scan.

And if you want to use madwifi-old-openhal for the purpose of testing,
please use today's revision, or it will corrupt memory due to incorrect
get_order() rounding that Linus has reverted in 2.6.21-rc4 (the fix is
not in wireless-dev.git yet).

-- 
Regards,
Pavel Roskin