From: Zhu Yi <yi.zhu@intel.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org, Zhu Yi <yi.zhu@intel.com>,
Tomas Winkler <tomas.winkler@intel.com>
Subject: [PATCH] iwlwifi: replacing IPW with IWL in error messages
Date: Thu, 27 Sep 2007 11:27:30 +0800 [thread overview]
Message-ID: <11908636662994-git-send-email-yi.zhu@intel.com> (raw)
In-Reply-To: <11908636643693-git-send-email-yi.zhu@intel.com>
This patch repaces IPW with IWL in error messages.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
---
drivers/net/wireless/iwlwifi/iwl3945-base.c | 6 +++---
drivers/net/wireless/iwlwifi/iwl4965-base.c | 6 +++---
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 44f983b..c271418 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -204,7 +204,7 @@ static void iwl_print_hex_dump(int level, void *p, u32 len)
* reclaiming packets (on 'tx done IRQ), if free space become > high mark,
* Tx queue resumed.
*
- * The IPW operates with six queues, one receive queue in the device's
+ * The IWL operates with six queues, one receive queue in the device's
* sram, one transmit queue for sending commands to the device firmware,
* and four transmit queues for data.
***************************************************/
@@ -4591,12 +4591,12 @@ static void iwl_dump_nic_event_log(struct iwl_priv *priv)
/* bail out if nothing in log */
if (size == 0) {
- IWL_ERROR("Start IPW Event Log Dump: nothing in log\n");
+ IWL_ERROR("Start IWL Event Log Dump: nothing in log\n");
iwl_release_restricted_access(priv);
return;
}
- IWL_ERROR("Start IPW Event Log Dump: display count %d, wraps %d\n",
+ IWL_ERROR("Start IWL Event Log Dump: display count %d, wraps %d\n",
size, num_wraps);
/* if uCode has wrapped back to top of log, start at the oldest entry,
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index 61500a2..9ad68b0 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -203,7 +203,7 @@ static void iwl_print_hex_dump(int level, void *p, u32 len)
* reclaiming packets (on 'tx done IRQ), if free space become > high mark,
* Tx queue resumed.
*
- * The IPW operates with six queues, one receive queue in the device's
+ * The IWL operates with six queues, one receive queue in the device's
* sram, one transmit queue for sending commands to the device firmware,
* and four transmit queues for data.
***************************************************/
@@ -4900,12 +4900,12 @@ static void iwl_dump_nic_event_log(struct iwl_priv *priv)
/* bail out if nothing in log */
if (size == 0) {
- IWL_ERROR("Start IPW Event Log Dump: nothing in log\n");
+ IWL_ERROR("Start IWL Event Log Dump: nothing in log\n");
iwl_release_restricted_access(priv);
return;
}
- IWL_ERROR("Start IPW Event Log Dump: display count %d, wraps %d\n",
+ IWL_ERROR("Start IWL Event Log Dump: display count %d, wraps %d\n",
size, num_wraps);
/* if uCode has wrapped back to top of log, start at the oldest entry,
--
1.5.1
next parent reply other threads:[~2007-09-27 3:34 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <11908636643693-git-send-email-yi.zhu@intel.com>
2007-09-27 3:27 ` Zhu Yi [this message]
2007-09-27 3:27 ` [PATCH] iwlwifi: workaournd REPLY_COMPRESSED_BA command in iwl_rx_handle Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: Correction for sending beacon in config_ap Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: clear station table in rxon unconditionally Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: Fix typo in rate sacling algorithm Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: fix add_station to avoid FW error Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: removing unnecessary memset in 4965 rate scale Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: add debugfs framework to " Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: add read rate scale table debugfs function Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: limit printouts on hot path Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: add supp_rates to rate scale sta private data Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: rs_rate_scale_perform clean up Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: set fixed rate through debugfs Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: add debugfs rate scale stats Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: Update iwlwifi version stamp to 1.1.17 Zhu Yi
2007-09-27 4:35 ` [PATCH] iwlwifi: set fixed rate through debugfs Randy Dunlap
2007-09-27 4:43 ` Zhu Yi
2007-09-27 14:26 ` Randy Dunlap
2007-09-28 7:44 ` Tomas Winkler
2007-09-27 4:32 ` [PATCH] iwlwifi: replacing IPW with IWL in error messages Randy Dunlap
2007-09-27 4:42 ` Zhu Yi
2007-09-27 20:41 ` iwlwifi driver updates John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11908636662994-git-send-email-yi.zhu@intel.com \
--to=yi.zhu@intel.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=tomas.winkler@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).