linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "John W. Linville" <linville@tuxdriver.com>
To: stable@kernel.org
Cc: linux-wireless@vger.kernel.org,
	"John W. Linville" <linville@tuxdriver.com>
Subject: [PATCH] mac80211: make ieee802_11_parse_elems return void
Date: Fri, 26 Oct 2007 17:04:35 -0400	[thread overview]
Message-ID: <11934326823109-git-send-email-linville@tuxdriver.com> (raw)
In-Reply-To: <11934326821301-git-send-email-linville@tuxdriver.com>

From: John W. Linville <linville@tuxdriver.com>

Some APs send management frames with junk padding after the last IE.
We already account for a similar problem with some Apple Airport
devices, but at least one device is known to send more than a single
extra byte.  The device in question is the Draytek Vigor2900:

	http://www.draytek.com.au/products/Vigor2900.php

The junk in question looks like an IE that runs off the end of the
frame.  This cause us to return ParseFailed.  Since the frame in
question is an association response, this causes us to fail to associate
with this AP.

The return code from ieee802_11_parse_elems is superfluous.
All callers still check for the presence of the specific IEs that
interest them anyway.  So, remove the return code so the parse never
"fails".

Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/ieee80211_sta.c |   56 ++++++-----------------------------------
 1 files changed, 9 insertions(+), 47 deletions(-)

diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c
index e78b51e..73d39e1 100644
--- a/net/mac80211/ieee80211_sta.c
+++ b/net/mac80211/ieee80211_sta.c
@@ -108,15 +108,11 @@ struct ieee802_11_elems {
 	u8 wmm_param_len;
 };
 
-typedef enum { ParseOK = 0, ParseUnknown = 1, ParseFailed = -1 } ParseRes;
-
-
-static ParseRes ieee802_11_parse_elems(u8 *start, size_t len,
-				       struct ieee802_11_elems *elems)
+static void ieee802_11_parse_elems(u8 *start, size_t len,
+				   struct ieee802_11_elems *elems)
 {
 	size_t left = len;
 	u8 *pos = start;
-	int unknown = 0;
 
 	memset(elems, 0, sizeof(*elems));
 
@@ -127,15 +123,8 @@ static ParseRes ieee802_11_parse_elems(u8 *start, size_t len,
 		elen = *pos++;
 		left -= 2;
 
-		if (elen > left) {
-#if 0
-			if (net_ratelimit())
-				printk(KERN_DEBUG "IEEE 802.11 element parse "
-				       "failed (id=%d elen=%d left=%d)\n",
-				       id, elen, left);
-#endif
-			return ParseFailed;
-		}
+		if (elen > left)
+			return;
 
 		switch (id) {
 		case WLAN_EID_SSID:
@@ -202,28 +191,15 @@ static ParseRes ieee802_11_parse_elems(u8 *start, size_t len,
 			elems->ext_supp_rates_len = elen;
 			break;
 		default:
-#if 0
-			printk(KERN_DEBUG "IEEE 802.11 element parse ignored "
-				      "unknown element (id=%d elen=%d)\n",
-				      id, elen);
-#endif
-			unknown++;
 			break;
 		}
 
 		left -= elen;
 		pos += elen;
 	}
-
-	/* Do not trigger error if left == 1 as Apple Airport base stations
-	 * send AssocResps that are one spurious byte too long. */
-
-	return unknown ? ParseUnknown : ParseOK;
 }
 
 
-
-
 static int ecw2cw(int ecw)
 {
 	int cw = 1;
@@ -907,12 +883,7 @@ static void ieee80211_auth_challenge(struct net_device *dev,
 
 	printk(KERN_DEBUG "%s: replying to auth challenge\n", dev->name);
 	pos = mgmt->u.auth.variable;
-	if (ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems)
-	    == ParseFailed) {
-		printk(KERN_DEBUG "%s: failed to parse Auth(challenge)\n",
-		       dev->name);
-		return;
-	}
+	ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
 	if (!elems.challenge) {
 		printk(KERN_DEBUG "%s: no challenge IE in shared key auth "
 		       "frame\n", dev->name);
@@ -1200,12 +1171,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct net_device *dev,
 	aid &= ~(BIT(15) | BIT(14));
 
 	pos = mgmt->u.assoc_resp.variable;
-	if (ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems)
-	    == ParseFailed) {
-		printk(KERN_DEBUG "%s: failed to parse AssocResp\n",
-		       dev->name);
-		return;
-	}
+	ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
 
 	if (!elems.supp_rates) {
 		printk(KERN_DEBUG "%s: no SuppRates element in AssocResp\n",
@@ -1434,7 +1400,7 @@ static void ieee80211_rx_bss_info(struct net_device *dev,
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 	struct ieee802_11_elems elems;
 	size_t baselen;
-	int channel, invalid = 0, clen;
+	int channel, clen;
 	struct ieee80211_sta_bss *bss;
 	struct sta_info *sta;
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
@@ -1478,9 +1444,7 @@ static void ieee80211_rx_bss_info(struct net_device *dev,
 #endif /* CONFIG_MAC80211_IBSS_DEBUG */
 	}
 
-	if (ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen,
-				   &elems) == ParseFailed)
-		invalid = 1;
+	ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen, &elems);
 
 	if (sdata->type == IEEE80211_IF_TYPE_IBSS && elems.supp_rates &&
 	    memcmp(mgmt->bssid, sdata->u.sta.bssid, ETH_ALEN) == 0 &&
@@ -1699,9 +1663,7 @@ static void ieee80211_rx_mgmt_beacon(struct net_device *dev,
 	if (baselen > len)
 		return;
 
-	if (ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen,
-				   &elems) == ParseFailed)
-		return;
+	ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen, &elems);
 
 	if (elems.erp_info && elems.erp_info_len >= 1)
 		ieee80211_handle_erp_ie(dev, elems.erp_info[0]);
-- 
1.5.2.4


  reply	other threads:[~2007-10-26 21:07 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-10-26 21:04 [PATCH] Add get_unaligned to ieee80211_get_radiotap_len John W. Linville
2007-10-26 21:04 ` [PATCH] Improve sanity checks on injected packets John W. Linville
2007-10-26 21:04   ` [PATCH] mac80211: filter locally-originated multicast frames John W. Linville
2007-10-26 21:04     ` [PATCH] libertas: fix endianness breakage John W. Linville
2007-10-26 21:04       ` [PATCH] libertas: more " John W. Linville
2007-10-26 21:04         ` [PATCH] ieee80211: fix TKIP QoS bug John W. Linville
2007-10-26 21:04           ` [PATCH] mac80211: reorder association debug output John W. Linville
2007-10-26 21:04             ` [PATCH] mac80211: store channel info in sta_bss_list John W. Linville
2007-10-26 21:04               ` [PATCH] mac80211: store SSID " John W. Linville
2007-10-26 21:04                 ` [PATCH] mac80211: honor IW_SCAN_THIS_ESSID in siwscan ioctl John W. Linville
2007-10-26 21:04                   ` [PATCH] mac80211: only honor IW_SCAN_THIS_ESSID in STA, IBSS, and AP modes John W. Linville
2007-10-26 21:04                     ` John W. Linville [this message]
2007-10-26 21:04                       ` [PATCH] zd1201: avoid null ptr access of skb->dev John W. Linville
2007-10-26 21:04                         ` [PATCH] ipw2100: send WEXT scan events John W. Linville
2007-10-26 21:04                           ` [PATCH] rtl8187: Fix more frag bit checking, rts duration calc John W. Linville
2007-10-26 21:04                             ` [PATCH] zd1211rw, fix oops when ejecting install media John W. Linville
2007-10-28  7:29                   ` [PATCH] mac80211: honor IW_SCAN_THIS_ESSID in siwscan ioctl Michael Wu
2007-10-28  7:31                     ` Michael Wu
2007-10-26 21:10             ` [PATCH] mac80211: reorder association debug output Johannes Berg
2007-10-26 21:23               ` John W. Linville
2007-10-26 21:31                 ` [stable] " Greg KH
2007-10-26 21:44                 ` Johannes Berg
2007-10-27 12:50                   ` John W. Linville
2007-10-27 12:58                     ` Johannes Berg
2007-10-28  7:57                       ` Michael Wu
  -- strict thread matches above, loose matches on Subject: below --
2007-10-17  2:38 [PATCH] mac80211: make ieee802_11_parse_elems return void John W. Linville
2007-10-17  3:17 ` Michael Wu
2007-10-17  8:15 ` Johannes Berg
2007-10-17 14:04   ` John W. Linville
2007-10-18 11:56     ` Johannes Berg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11934326823109-git-send-email-linville@tuxdriver.com \
    --to=linville@tuxdriver.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=stable@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).