From: Ron Rindjunsky <ron.rindjunsky@intel.com>
To: linville@tuxdriver.com
Cc: johannes@sipsolutions.net, linux-wireless@vger.kernel.org,
tomas.winkler@intel.com, flamingice@sourmilk.net,
Ron Rindjunsky <ron.rindjunsky@intel.com>
Subject: [PATCH 04/14] mac80211: adding 802.11n IEs handling
Date: Fri, 9 Nov 2007 10:01:56 +0200 [thread overview]
Message-ID: <1194595331658-git-send-email-ron.rindjunsky@intel.com> (raw)
In-Reply-To: <11945953312367-git-send-email-ron.rindjunsky@intel.com>
This patch presents the ability to parse and compose HT IEs, and to put
the IE relevant data inside the mac80211's internal HT structures
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
---
net/mac80211/ieee80211_i.h | 11 ++++
net/mac80211/ieee80211_sta.c | 106 ++++++++++++++++++++++++++++++++++++++++-
2 files changed, 114 insertions(+), 3 deletions(-)
Index: wl2_6_24_HT/net/mac80211/ieee80211_i.h
===================================================================
--- wl2_6_24_HT.orig/net/mac80211/ieee80211_i.h
+++ wl2_6_24_HT/net/mac80211/ieee80211_i.h
@@ -89,6 +89,10 @@ struct ieee80211_sta_bss {
size_t rsn_ie_len;
u8 *wmm_ie;
size_t wmm_ie_len;
+#ifdef CONFIG_MAC80211_HT
+ u8 *ht_ie;
+ size_t ht_ie_len;
+#endif /* CONFIG_MAC80211_HT */
#define IEEE80211_MAX_SUPP_RATES 32
u8 supp_rates[IEEE80211_MAX_SUPP_RATES];
size_t supp_rates_len;
@@ -759,6 +763,13 @@ int ieee80211_sta_deauthenticate(struct
int ieee80211_sta_disassociate(struct net_device *dev, u16 reason);
void ieee80211_erp_info_change_notify(struct net_device *dev, u8 changes);
void ieee80211_reset_erp_info(struct net_device *dev);
+#ifdef CONFIG_MAC80211_HT
+int ieee80211_ht_cap_ie_to_ht_info(struct ieee80211_ht_cap *ht_cap_ie,
+ struct ieee80211_ht_info *ht_info);
+int ieee80211_ht_addt_info_ie_to_ht_bss_info(
+ struct ieee80211_ht_addt_info *ht_add_info_ie,
+ struct ieee80211_ht_bss_info *bss_info);
+#endif /* CONFIG_MAC80211_HT */
/* ieee80211_iface.c */
int ieee80211_if_add(struct net_device *dev, const char *name,
Index: wl2_6_24_HT/net/mac80211/ieee80211_sta.c
===================================================================
--- wl2_6_24_HT.orig/net/mac80211/ieee80211_sta.c
+++ wl2_6_24_HT/net/mac80211/ieee80211_sta.c
@@ -90,7 +90,10 @@ struct ieee802_11_elems {
u8 *ext_supp_rates;
u8 *wmm_info;
u8 *wmm_param;
-
+#ifdef CONFIG_MAC80211_HT
+ u8 *ht_cap_elem;
+ u8 *ht_info_elem;
+#endif /* CONFIG_MAC80211_HT */
/* length of them, respectively */
u8 ssid_len;
u8 supp_rates_len;
@@ -106,6 +109,10 @@ struct ieee802_11_elems {
u8 ext_supp_rates_len;
u8 wmm_info_len;
u8 wmm_param_len;
+#ifdef CONFIG_MAC80211_HT
+ u8 ht_cap_elem_len;
+ u8 ht_info_elem_len;
+#endif /* CONFIG_MAC80211_HT */
};
static void ieee802_11_parse_elems(u8 *start, size_t len,
@@ -190,6 +197,16 @@ static void ieee802_11_parse_elems(u8 *s
elems->ext_supp_rates = pos;
elems->ext_supp_rates_len = elen;
break;
+#ifdef CONFIG_MAC80211_HT
+ case WLAN_EID_HT_CAPABILITY:
+ elems->ht_cap_elem = pos;
+ elems->ht_cap_elem_len = elen;
+ break;
+ case WLAN_EID_HT_EXTRA_INFO:
+ elems->ht_info_elem = pos;
+ elems->ht_info_elem_len = elen;
+ break;
+#endif /* CONFIG_MAC80211_HT */
default:
break;
}
@@ -332,6 +349,55 @@ static void ieee80211_handle_erp_ie(stru
ieee80211_erp_info_change_notify(dev, changes);
}
+#ifdef CONFIG_MAC80211_HT
+
+int ieee80211_ht_cap_ie_to_ht_info(struct ieee80211_ht_cap *ht_cap_ie,
+ struct ieee80211_ht_info *ht_info)
+{
+
+ if (ht_info == NULL)
+ return -EINVAL;
+
+ memset(ht_info, 0, sizeof(*ht_info));
+
+ if (ht_cap_ie) {
+ u8 ampdu_info = ht_cap_ie->ampdu_params_info;
+
+ ht_info->ht_supported = 1;
+ ht_info->cap = le16_to_cpu(ht_cap_ie->cap_info);
+ ht_info->ampdu_factor =
+ ampdu_info & IEEE80211_HT_CAP_AMPDU_FACTOR;
+ ht_info->ampdu_density =
+ (ampdu_info & IEEE80211_HT_CAP_AMPDU_DENSITY) >> 2;
+ memcpy(ht_info->supp_mcs_set, ht_cap_ie->supp_mcs_set, 16);
+ } else
+ ht_info->ht_supported = 0;
+
+ return 0;
+}
+
+int ieee80211_ht_addt_info_ie_to_ht_bss_info(
+ struct ieee80211_ht_addt_info *ht_add_info_ie,
+ struct ieee80211_ht_bss_info *bss_info)
+{
+ if (bss_info == NULL)
+ return -EINVAL;
+
+ memset(bss_info, 0, sizeof(*bss_info));
+
+ if (ht_add_info_ie) {
+ u16 op_mode;
+ op_mode = le16_to_cpu(ht_add_info_ie->operation_mode);
+
+ bss_info->primary_channel = ht_add_info_ie->control_chan;
+ bss_info->bss_cap = ht_add_info_ie->ht_param;
+ bss_info->bss_op_mode = (u8)(op_mode & 0xff);
+ }
+
+ return 0;
+}
+
+#endif /* CONFIG_MAC80211_HT */
static void ieee80211_sta_send_associnfo(struct net_device *dev,
struct ieee80211_if_sta *ifsta)
@@ -630,6 +696,21 @@ static void ieee80211_send_assoc(struct
*pos++ = 1; /* WME ver */
*pos++ = 0;
}
+#ifdef CONFIG_MAC80211_HT
+ /* wmm support is a must to HT */
+ if (wmm && mode->ht_info.ht_supported) {
+ __le16 tmp = cpu_to_le16(mode->ht_info.cap);
+ pos = skb_put(skb, sizeof(struct ieee80211_ht_cap)+2);
+ *pos++ = WLAN_EID_HT_CAPABILITY;
+ *pos++ = sizeof(struct ieee80211_ht_cap);
+ memset(pos, 0, sizeof(struct ieee80211_ht_cap));
+ memcpy(pos, &tmp, sizeof(u16));
+ pos += sizeof(u16);
+ *pos++ = (mode->ht_info.ampdu_factor |
+ (mode->ht_info.ampdu_density << 2));
+ memcpy(pos, mode->ht_info.supp_mcs_set, 16);
+ }
+#endif /* CONFIG_MAC80211_HT */
kfree(ifsta->assocreq_ies);
ifsta->assocreq_ies_len = (skb->data + skb->len) - ies;
@@ -1384,6 +1465,9 @@ static void ieee80211_rx_bss_free(struct
kfree(bss->wpa_ie);
kfree(bss->rsn_ie);
kfree(bss->wmm_ie);
+#ifdef CONFIG_MAC80211_HT
+ kfree(bss->ht_ie);
+#endif /* CONFIG_MAC80211_HT */
kfree(bss);
}
@@ -1631,8 +1715,24 @@ static void ieee80211_rx_bss_info(struct
bss->wmm_ie = NULL;
bss->wmm_ie_len = 0;
}
-
-
+#ifdef CONFIG_MAC80211_HT
+ if (elems.ht_cap_elem &&
+ (!bss->ht_ie || bss->ht_ie_len != elems.ht_cap_elem_len ||
+ memcmp(bss->ht_ie, elems.ht_cap_elem, elems.ht_cap_elem_len))) {
+ kfree(bss->ht_ie);
+ bss->ht_ie = kmalloc(elems.ht_cap_elem_len + 2, GFP_ATOMIC);
+ if (bss->ht_ie) {
+ memcpy(bss->ht_ie, elems.ht_cap_elem - 2,
+ elems.ht_cap_elem_len + 2);
+ bss->ht_ie_len = elems.ht_cap_elem_len + 2;
+ } else
+ bss->ht_ie_len = 0;
+ } else if (!elems.ht_cap_elem && bss->ht_ie) {
+ kfree(bss->ht_ie);
+ bss->ht_ie = NULL;
+ bss->ht_ie_len = 0;
+ }
+#endif /* CONFIG_MAC80211_HT */
bss->hw_mode = rx_status->phymode;
bss->freq = rx_status->freq;
if (channel != rx_status->channel &&
---------------------------------------------------------------------
Intel Israel (74) Limited
This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
next prev parent reply other threads:[~2007-11-09 8:02 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-09 8:01 [PATCH 0/14] mac80211/iwlwifi (#everything): integrate IEEE802.11n support Ron Rindjunsky
2007-11-09 8:01 ` [PATCH 01/14] mac80211: adding MAC80211_HT config variable Ron Rindjunsky
2007-11-09 8:01 ` [PATCH 02/14] mac80211: adding 802.11n definitions in ieee80211.h Ron Rindjunsky
2007-11-09 8:01 ` [PATCH 03/14] mac80211: adding 802.11n HT framework definitions Ron Rindjunsky
2007-11-09 8:01 ` Ron Rindjunsky [this message]
2007-11-09 8:01 ` [PATCH 05/14] mac80211: adding 802.11n essential A-MPDU addBA capability Ron Rindjunsky
2007-11-09 8:01 ` [PATCH 06/14] mac80211: adding 802.11n essential A-MSDU Rx capability Ron Rindjunsky
2007-11-09 8:01 ` [PATCH 07/14] mac80211: adding 802.11n configuration flows Ron Rindjunsky
2007-11-09 8:02 ` [PATCH 08/14] iwlwifi: 802.11n new framework structures preperation Ron Rindjunsky
2007-11-09 8:02 ` [PATCH 09/14] iwlwifi: 802.11n configuring hw_mode parameters to support HT in A/G Ron Rindjunsky
2007-11-09 8:02 ` [PATCH 10/14] iwlwifi: 802.11n handling probe request HT IE Ron Rindjunsky
2007-11-09 8:02 ` [PATCH 11/14] iwlwifi: 802.11n comply HT self configuration flow with mac80211 framework Ron Rindjunsky
2007-11-09 8:02 ` [PATCH 12/14] iwlwifi: 802.11n comply HT add station " Ron Rindjunsky
2007-11-09 8:02 ` [PATCH 13/14] iwlwifi: 802.11n comply HT rate scaling flows " Ron Rindjunsky
2007-11-09 8:02 ` [PATCH 14/14] iwlwifi: 802.11n add support to 8K A-MSDU Rx frames Ron Rindjunsky
2007-11-09 16:53 ` [PATCH 12/14] iwlwifi: 802.11n comply HT add station flow with mac80211 framework Johannes Berg
2007-11-11 20:21 ` [PATCH 12/14] iwlwifi: 802.11n comply HT add station flow withmac80211 framework Rindjunsky, Ron
2007-11-12 16:35 ` Johannes Berg
2007-11-09 16:52 ` [PATCH 10/14] iwlwifi: 802.11n handling probe request HT IE Johannes Berg
2007-11-09 16:51 ` [PATCH 09/14] iwlwifi: 802.11n configuring hw_mode parameters to support HT in A/G Johannes Berg
2007-11-09 16:48 ` [PATCH 07/14] mac80211: adding 802.11n configuration flows Johannes Berg
2007-11-11 20:20 ` Rindjunsky, Ron
2007-11-12 16:37 ` Johannes Berg
2007-11-13 15:58 ` Rindjunsky, Ron
2007-11-09 16:41 ` [PATCH 06/14] mac80211: adding 802.11n essential A-MSDU Rx capability Johannes Berg
2007-11-11 20:20 ` [PATCH 06/14] mac80211: adding 802.11n essential A-MSDU Rxcapability Rindjunsky, Ron
2007-11-12 16:45 ` Johannes Berg
2007-11-13 15:58 ` [PATCH 06/14] mac80211: adding 802.11n essential A-MSDURxcapability Rindjunsky, Ron
2007-11-13 16:22 ` Rindjunsky, Ron
2007-11-13 16:32 ` Johannes Berg
2007-11-14 15:14 ` Ron Rindzonski
2007-11-19 0:19 ` [PATCH 06/14] mac80211: adding 802.11n essential A-MSDU Rxcapability Jouni Malinen
2007-11-19 13:29 ` Ron Rindjunsky
2007-11-19 15:27 ` Johannes Berg
2007-11-09 16:34 ` [PATCH 05/14] mac80211: adding 802.11n essential A-MPDU addBA capability Johannes Berg
2007-11-11 20:20 ` [PATCH 05/14] mac80211: adding 802.11n essential A-MPDU addBAcapability Rindjunsky, Ron
2007-11-12 16:48 ` Johannes Berg
2007-11-13 15:58 ` [PATCH 05/14] mac80211: adding 802.11n essential A-MPDUaddBAcapability Rindjunsky, Ron
2007-11-09 16:23 ` [PATCH 03/14] mac80211: adding 802.11n HT framework definitions Johannes Berg
2007-11-11 20:20 ` Rindjunsky, Ron
2007-11-09 16:26 ` [PATCH 02/14] mac80211: adding 802.11n definitions in ieee80211.h Johannes Berg
2007-11-11 20:20 ` [PATCH 02/14] mac80211: adding 802.11n definitions inieee80211.h Rindjunsky, Ron
2007-11-12 16:49 ` Johannes Berg
2007-11-12 3:24 ` [PATCH 01/14] mac80211: adding MAC80211_HT config variable Michael Wu
2007-11-12 7:33 ` Rindjunsky, Ron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1194595331658-git-send-email-ron.rindjunsky@intel.com \
--to=ron.rindjunsky@intel.com \
--cc=flamingice@sourmilk.net \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=tomas.winkler@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).