From: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
To: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>,
ath12k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: Re: [PATCH ath-next] wifi: ath12k: add hardware parameters for maximum supported clients
Date: Mon, 1 Jun 2026 18:19:33 +0530 [thread overview]
Message-ID: <11cc2fb6-e717-4f1e-8a9c-62e21e82ad00@oss.qualcomm.com> (raw)
In-Reply-To: <20260515030909.3312511-1-aaradhana.sahu@oss.qualcomm.com>
On 5/15/2026 8:39 AM, Aaradhana Sahu wrote:
> Currently, the driver uses memory profile parameters to determine the
> maximum number of supported clients, with a default limit of 512 for
> single-radio and 128 for DBS and DBS+SBS configurations. However,
> some devices have lower hardware limits depending on the radio
> configuration. Exceeding these hardware-specific limits can lead to
> firmware crashes.
>
> Add hardware parameters in ath12k_hw_params to define the maximum supported
> clients for each radio configuration. The driver uses the minimum of the
> memory profile limit and the hardware capability limit to prevent exceeding
> hardware constraints.
>
> Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.6-01275-QCAHKSWPL_SILICONZ-1
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
>
> Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
next prev parent reply other threads:[~2026-06-01 12:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-15 3:09 [PATCH ath-next] wifi: ath12k: add hardware parameters for maximum supported clients Aaradhana Sahu
2026-06-01 5:50 ` Baochen Qiang
2026-06-01 12:49 ` Rameshkumar Sundaram [this message]
2026-06-01 17:00 ` Jeff Johnson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11cc2fb6-e717-4f1e-8a9c-62e21e82ad00@oss.qualcomm.com \
--to=rameshkumar.sundaram@oss.qualcomm.com \
--cc=aaradhana.sahu@oss.qualcomm.com \
--cc=ath12k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox