linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Romano Giannetti <romanol@upcomillas.es>
To: linux-wireless@vger.kernel.org
Subject: Testing ath5k driver
Date: Fri, 11 Jan 2008 12:02:40 +0100	[thread overview]
Message-ID: <1200049360.12702.14.camel@rukbat> (raw)


Hi all,

I stumbled yesterday on the compat- package and I could not resist to
test the new drivers on my laptop. (BTW, the link to the download page
on http://linuxwireless.org/en/users/Drivers/ath5k is wrong).=20

I have a toshiba U305 with a Atheros chipset, marked as AR5BXB63 or
AR5007EG.

06:00.0 Ethernet controller: Atheros Communications, Inc. AR5006EG 802.=
11 b/g Wireless PCI Express Adapter (rev 01)
        Subsystem: Askey Computer Corp. Unknown device 7128
        Flags: fast devsel, IRQ 19
        Memory at 88200000 (64-bit, non-prefetchable) [size=3D64K]
        Capabilities: [40] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Q=
ueue=3D0/0 Enable-
        Capabilities: [60] Express Legacy Endpoint IRQ 0
        Capabilities: [90] MSI-X: Enable- Mask- TabSize=3D1
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Virtual Channel
00: 8c 16 1c 00 42 01 10 00 01 00 00 02 10 00 00 00
10: 04 00 20 88 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 01 50 00 00 4f 14 28 71
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00

I have built the yesterday  compat-wireless-2.6.tar.bz2 and after all
the step I have:=20

[  312.999107] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, lo=
w) -> IRQ 19
[  312.999141] PCI: Setting latency timer of device 0000:06:00.0 to 64
[  312.999351] ath5k_pci 0000:06:00.0: registered as 'phy0'
[  314.048568] ath5k phy0: failed to resume the MAC Chip
[  314.048652] ACPI: PCI interrupt for device 0000:06:00.0 disabled
[  314.048674] ath5k_pci: probe of 0000:06:00.0 failed with error -5

So... just to give you a data point. I am available to test things. The
wireless works ok[*] with ndiswrapper and XP drivers for AR5008.

Romano

[*] Well, if I do not try to load ath5k modules. After that, and after
unload it and all of the dependent modules, trying to load ndiswrapper
again put the laptop in brick mode. But that's another story, I know.=20



--=20
Sorry for the disclaimer --- =A1I cannot stop it!



--
La presente comunicaci=F3n tiene car=E1cter confidencial y es para el e=
xclusivo uso del destinatario indicado en la misma. Si Ud. no es el des=
tinatario indicado, le informamos que cualquier forma de distribuci=F3n=
, reproducci=F3n o uso de esta comunicaci=F3n y/o de la informaci=F3n c=
ontenida en la misma est=E1n estrictamente prohibidos por la ley. Si Ud=
=2E ha recibido esta comunicaci=F3n por error, por favor, notif=EDquelo=
 inmediatamente al remitente contestando a este mensaje y proceda a con=
tinuaci=F3n a destruirlo. Gracias por su colaboraci=F3n.

This communication contains confidential information. It is for the exc=
lusive use of the intended addressee. If you are not the intended addre=
ssee, please note that any form of distribution, copying or use of this=
 communication or the information in it is strictly prohibited by law. =
If you have received this communication in error, please immediately no=
tify the sender by reply e-mail and destroy this message. Thank you for=
 your cooperation.=20
-
To unsubscribe from this list: send the line "unsubscribe linux-wireles=
s" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2008-01-11 11:02 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-01-11 11:02 Romano Giannetti [this message]
2008-01-11 16:56 ` Testing ath5k driver Nick Kossifidis
2008-01-11 17:46   ` Romano Giannetti
2008-01-11 18:05     ` Nick Kossifidis
2008-01-13 20:11   ` Richard Scherping

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1200049360.12702.14.camel@rukbat \
    --to=romanol@upcomillas.es \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).