* b43 doesn't reset hardware when loaded/unloaded [severity: minor] @ 2008-02-04 19:32 Thomas Ilnseher 2008-02-04 20:06 ` Stefano Brivio 2008-02-04 20:12 ` Michael Buesch 0 siblings, 2 replies; 3+ messages in thread From: Thomas Ilnseher @ 2008-02-04 19:32 UTC (permalink / raw) To: linux-wireless Hi! I upgraded my kernel to 2.6.24, and so I also upgraded from bcm43xx to b43. There used to be a problem with bcm43xx that after resuming from Supend-To-Ram, wireless didn't work anymore. This however could be fixed with bcm43xx using the following sequence: killall dhcpcd killall wpa_supplicant ifconfig wlan0 down #nb: the if was renamed from eth1 to wlan0 via udev rmmod bcm43xx modprobe bcm43xx ifconfig wlan0 up wpa_supplicant -iwlan0 -Dwext -c/etc/wpa_supplicant/wpa_supplicant.conf\ -B -P/var/run/wpa_supplicant.pid dhcpcd wlan0 It doesn't work with b43. (of course replacing bcm43xx with b43). I *assume* that the core isn't completely reseted on insmod'ing. regards, tom PS: keep the good work! also, tux-on-ice works, so this is just a minor annoyance. -- Thomas Ilnseher <illth@gmx.de> ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: b43 doesn't reset hardware when loaded/unloaded [severity: minor] 2008-02-04 19:32 b43 doesn't reset hardware when loaded/unloaded [severity: minor] Thomas Ilnseher @ 2008-02-04 20:06 ` Stefano Brivio 2008-02-04 20:12 ` Michael Buesch 1 sibling, 0 replies; 3+ messages in thread From: Stefano Brivio @ 2008-02-04 20:06 UTC (permalink / raw) To: Thomas Ilnseher; +Cc: linux-wireless On Mon, 04 Feb 2008 20:32:55 +0100 Thomas Ilnseher <illth@gmx.de> wrote: > Hi! > > I upgraded my kernel to 2.6.24, and > so I also upgraded from bcm43xx to b43. > > There used to be a problem with bcm43xx that after > resuming from Supend-To-Ram, wireless didn't work anymore. [...] > It doesn't work with b43. (of course replacing bcm43xx with b43). > I *assume* that the core isn't completely reseted on insmod'ing. This should be fixed in 2.6.24.1. A patch is available in the wireless-2.6 tree. -- Ciao Stefano ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: b43 doesn't reset hardware when loaded/unloaded [severity: minor] 2008-02-04 19:32 b43 doesn't reset hardware when loaded/unloaded [severity: minor] Thomas Ilnseher 2008-02-04 20:06 ` Stefano Brivio @ 2008-02-04 20:12 ` Michael Buesch 1 sibling, 0 replies; 3+ messages in thread From: Michael Buesch @ 2008-02-04 20:12 UTC (permalink / raw) To: Thomas Ilnseher; +Cc: linux-wireless On Monday 04 February 2008 20:32:55 Thomas Ilnseher wrote: > Hi! > > I upgraded my kernel to 2.6.24, and > so I also upgraded from bcm43xx to b43. > > There used to be a problem with bcm43xx that after > resuming from Supend-To-Ram, wireless didn't work anymore. Fixed in wireless-2.6 and will be fixed in the upcoming 2.6.24.1. -- Greetings Michael. ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-02-04 20:56 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2008-02-04 19:32 b43 doesn't reset hardware when loaded/unloaded [severity: minor] Thomas Ilnseher 2008-02-04 20:06 ` Stefano Brivio 2008-02-04 20:12 ` Michael Buesch
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).