From: Johannes Berg <johannes@sipsolutions.net>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Subject: [PATCH] mac80211: convert sta_info.pspoll to a flag
Date: Tue, 19 Feb 2008 11:31:14 +0100 [thread overview]
Message-ID: <1203417074.12963.32.camel@johannes.berg> (raw)
This doesn't really need to be a full int variable since it's
just a flag to indicate a PS-poll is in progress.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
---
net/mac80211/rx.c | 13 +++++++------
net/mac80211/sta_info.h | 3 ++-
net/mac80211/tx.c | 5 +++--
3 files changed, 12 insertions(+), 9 deletions(-)
--- everything.orig/net/mac80211/rx.c 2008-02-19 11:24:15.273690810 +0100
+++ everything/net/mac80211/rx.c 2008-02-19 11:24:54.373690049 +0100
@@ -578,7 +578,7 @@ static void ap_sta_ps_start(struct net_d
if (sdata->bss)
atomic_inc(&sdata->bss->num_sta_ps);
sta->flags |= WLAN_STA_PS;
- sta->pspoll = 0;
+ sta->flags &= ~WLAN_STA_PSPOLL;
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "%s: STA %s aid %d enters power save mode\n",
dev->name, print_mac(mac, sta->addr), sta->aid);
@@ -597,8 +597,7 @@ static int ap_sta_ps_end(struct net_devi
sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev);
if (sdata->bss)
atomic_dec(&sdata->bss->num_sta_ps);
- sta->flags &= ~(WLAN_STA_PS | WLAN_STA_TIM);
- sta->pspoll = 0;
+ sta->flags &= ~(WLAN_STA_PS | WLAN_STA_TIM | WLAN_STA_PSPOLL);
if (!skb_queue_empty(&sta->ps_tx_buf)) {
if (local->ops->set_tim)
local->ops->set_tim(local_to_hw(local), sta->aid, 0);
@@ -924,9 +923,11 @@ ieee80211_rx_h_ps_poll(struct ieee80211_
struct ieee80211_hdr *hdr =
(struct ieee80211_hdr *) skb->data;
- /* tell TX path to send one frame even though the STA may
- * still remain is PS mode after this frame exchange */
- rx->sta->pspoll = 1;
+ /*
+ * Tell TX path to send one frame even though the STA may
+ * still remain is PS mode after this frame exchange.
+ */
+ rx->sta->flags |= WLAN_STA_PSPOLL;
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "STA %s aid %d: PS Poll (entries after %d)\n",
--- everything.orig/net/mac80211/sta_info.h 2008-02-19 11:23:32.013730903 +0100
+++ everything/net/mac80211/sta_info.h 2008-02-19 11:28:26.283690484 +0100
@@ -32,6 +32,7 @@
* @WLAN_STA_ASSOC_AP: We're associated to that station, it is an AP.
* @WLAN_STA_WME: Station is a QoS-STA.
* @WLAN_STA_WDS: Station is one of our WDS peers.
+ * @WLAN_STA_PSPOLL: Station has just PS-polled us.
*/
enum ieee80211_sta_info_flags {
WLAN_STA_AUTH = 1<<0,
@@ -43,6 +44,7 @@ enum ieee80211_sta_info_flags {
WLAN_STA_ASSOC_AP = 1<<6,
WLAN_STA_WME = 1<<7,
WLAN_STA_WDS = 1<<8,
+ WLAN_STA_PSPOLL = 1<<9,
};
#define STA_TID_NUM 16
@@ -133,7 +135,6 @@ struct sta_info {
struct sk_buff_head ps_tx_buf; /* buffer of TX frames for station in
* power saving state */
- int pspoll; /* whether STA has send a PS Poll frame */
struct sk_buff_head tx_filtered; /* buffer of TX frames that were
* already given to low-level driver,
* but were filtered */
--- everything.orig/net/mac80211/tx.c 2008-02-19 11:25:05.753690810 +0100
+++ everything/net/mac80211/tx.c 2008-02-19 11:26:05.173686632 +0100
@@ -395,7 +395,8 @@ ieee80211_tx_h_unicast_ps_buf(struct iee
(tx->fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP)))
return TX_CONTINUE;
- if (unlikely((sta->flags & WLAN_STA_PS) && !sta->pspoll)) {
+ if (unlikely((sta->flags & WLAN_STA_PS) &&
+ !(sta->flags & WLAN_STA_PSPOLL))) {
struct ieee80211_tx_packet_data *pkt_data;
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "STA %s aid %d: PS buffer (entries "
@@ -436,7 +437,7 @@ ieee80211_tx_h_unicast_ps_buf(struct iee
print_mac(mac, sta->addr));
}
#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
- sta->pspoll = 0;
+ sta->flags &= ~WLAN_STA_PSPOLL;
return TX_CONTINUE;
}
reply other threads:[~2008-02-19 12:34 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1203417074.12963.32.camel@johannes.berg \
--to=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox