linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dan Williams <dcbw@redhat.com>
To: Holger Schurig <hs4233@mail.mn-solutions.de>
Cc: libertas-dev@lists.infradead.org, linux-wireless@vger.kernel.org,
	"John W. Linville" <linville@tuxdriver.com>
Subject: Re: [PATCH] libertas: fix sleep confirmation
Date: Wed, 04 Jun 2008 10:07:36 -0400	[thread overview]
Message-ID: <1212588457.13676.6.camel@localhost.localdomain> (raw)
In-Reply-To: <200806041110.40560.hs4233@mail.mn-solutions.de>

On Wed, 2008-06-04 at 11:10 +0200, Holger Schurig wrote:
> This fixes an issus that made "iwconfig eth1 power on" non-working.
> When we get a "PS sleep" event, we have to confirm this to the firmware.
> The confirm happens with a command, but this command is special: the
> firmware won't send us a response. if_cs_host_to_card() is setting
> priv->dnld_sent anyway, so this variable stayed at DNLD_DATA_SENT and
> was never cleared back.
> 
> Now I put the special knowledge that the CMD_802_11_PS_MODE with
> CMD_SUBCMD_SLEEP_CONFIRMED doesn't need to need a response by directly
> clearing the dnld_sent state in lbs_send_confirmsleep().
> 
> Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>

Acked-by: Dan Williams <dcbw@redhat.com>

> Index: wireless-testing/drivers/net/wireless/libertas/main.c
> ===================================================================
> --- wireless-testing.orig/drivers/net/wireless/libertas/main.c	2008-06-04 09:55:27.000000000 +0200
> +++ wireless-testing/drivers/net/wireless/libertas/main.c	2008-06-04 09:55:55.000000000 +0200
> @@ -765,8 +765,8 @@ static int lbs_thread(void *data)
>  		lbs_deb_thread("4: currenttxskb %p, dnld_sent %d\n",
>  		       priv->currenttxskb, priv->dnld_sent);
>  
> -		spin_lock_irq(&priv->driver_lock);
>  		/* Process any pending command response */
> +		spin_lock_irq(&priv->driver_lock);
>  		resp_idx = priv->resp_idx;
>  		if (priv->resp_len[resp_idx]) {
>  			spin_unlock_irq(&priv->driver_lock);
> Index: wireless-testing/drivers/net/wireless/libertas/cmd.c
> ===================================================================
> --- wireless-testing.orig/drivers/net/wireless/libertas/cmd.c	2008-06-04 09:55:27.000000000 +0200
> +++ wireless-testing/drivers/net/wireless/libertas/cmd.c	2008-06-04 09:56:20.000000000 +0200
> @@ -1858,6 +1858,9 @@ static void lbs_send_confirmsleep(struct
>  
>  	spin_lock_irqsave(&priv->driver_lock, flags);
>  
> +	/* We don't get a response on the sleep-confirmation */
> +	priv->dnld_sent = DNLD_RES_RECEIVED;
> +
>  	/* If nothing to do, go back to sleep (?) */
>  	if (!__kfifo_len(priv->event_fifo) && !priv->resp_len[priv->resp_idx])
>  		priv->psstate = PS_STATE_SLEEP;
> @@ -1920,12 +1923,12 @@ void lbs_ps_confirm_sleep(struct lbs_pri
>  
>  	lbs_deb_enter(LBS_DEB_HOST);
>  
> +	spin_lock_irqsave(&priv->driver_lock, flags);
>  	if (priv->dnld_sent) {
>  		allowed = 0;
>  		lbs_deb_host("dnld_sent was set\n");
>  	}
>  
> -	spin_lock_irqsave(&priv->driver_lock, flags);
>  	/* In-progress command? */
>  	if (priv->cur_cmd) {
>  		allowed = 0;


      reply	other threads:[~2008-06-04 14:08 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-04  9:10 [PATCH] libertas: fix sleep confirmation Holger Schurig
2008-06-04 14:07 ` Dan Williams [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1212588457.13676.6.camel@localhost.localdomain \
    --to=dcbw@redhat.com \
    --cc=hs4233@mail.mn-solutions.de \
    --cc=libertas-dev@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).