From: Dan Williams <dcbw@redhat.com>
To: Luis Carlos Cobo <luisca@cozybit.com>
Cc: linux-wireless@vger.kernel.org, johannes@sipsolutions.net
Subject: Re: [PATCH 5/6] libertastf: usb specific functions
Date: Sun, 27 Jul 2008 11:57:08 -0400 [thread overview]
Message-ID: <1217174228.2700.35.camel@localhost.localdomain> (raw)
In-Reply-To: <487638a5.165b4e0a.1a40.164f@mx.google.com>
On Thu, 2008-07-10 at 17:19 +0200, Luis Carlos Cobo wrote:
> The libertas thin firmware only supports usb devices, but the usb functions have
> been kept separate to ease future support for other devices. There is some code
> duplication with the usb functions in the "libertas driver", specially on the
> firmware upload routines. Any idea on how to share the code with "libertas"
> driver will be welcomed.
Truncated license headers here too. Otherwise looks fine. Firmware
file upload is another candidate for stuffing into libertas_lib or
whatever.
Dan
> Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
> Tested-by: Javier Cardona <javier@cozybit.com>
> ---
> drivers/net/wireless/libertastf/if_usb.c | 763 ++++++++++++++++++++++++++++++
> drivers/net/wireless/libertastf/if_usb.h | 97 ++++
> 2 files changed, 860 insertions(+), 0 deletions(-)
> create mode 100644 drivers/net/wireless/libertastf/if_usb.c
> create mode 100644 drivers/net/wireless/libertastf/if_usb.h
>
> diff --git a/drivers/net/wireless/libertastf/if_usb.c b/drivers/net/wireless/libertastf/if_usb.c
> new file mode 100644
> index 0000000..bb62066
> --- /dev/null
> +++ b/drivers/net/wireless/libertastf/if_usb.c
> @@ -0,0 +1,763 @@
> +/*
> + * Copyright (C) 2008, cozybit Inc.
> + * Copyright (C) 2003-2006, Marvell International Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License
> + */
> +#include <linux/delay.h>
> +#include <linux/moduleparam.h>
> +#include <linux/firmware.h>
> +#include <linux/netdevice.h>
> +#include <linux/usb.h>
> +
> +#define DRV_NAME "lbtf_usb"
> +
> +#include "libertastf.h"
> +#include "if_usb.h"
> +
> +#define MESSAGE_HEADER_LEN 4
> +
> +static char *lbtf_fw_name = "lbtf_usb.bin";
> +module_param_named(fw_name, lbtf_fw_name, charp, 0644);
> +
> +static struct usb_device_id if_usb_table[] = {
> + /* Enter the device signature inside */
> + { USB_DEVICE(0x1286, 0x2001) },
> + { USB_DEVICE(0x05a3, 0x8388) },
> + {} /* Terminating entry */
> +};
> +
> +MODULE_DEVICE_TABLE(usb, if_usb_table);
> +
> +static void if_usb_receive(struct urb *urb);
> +static void if_usb_receive_fwload(struct urb *urb);
> +static int if_usb_prog_firmware(struct if_usb_card *cardp);
> +static int if_usb_host_to_card(struct lbtf_private *priv, uint8_t type,
> + uint8_t *payload, uint16_t nb);
> +static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload,
> + uint16_t nb, u8 data);
> +static void if_usb_free(struct if_usb_card *cardp);
> +static int if_usb_submit_rx_urb(struct if_usb_card *cardp);
> +static int if_usb_reset_device(struct if_usb_card *cardp);
> +
> +/**
> + * if_usb_wrike_bulk_callback - call back to handle URB status
> + *
> + * @param urb pointer to urb structure
> + */
> +static void if_usb_write_bulk_callback(struct urb *urb)
> +{
> + if (urb->status != 0)
> + printk(KERN_INFO "libertastf: URB in failure status: %d\n",
> + urb->status);
> +}
> +
> +/**
> + * if_usb_free - free tx/rx urb, skb and rx buffer
> + *
> + * @param cardp pointer if_usb_card
> + */
> +static void if_usb_free(struct if_usb_card *cardp)
> +{
> + /* Unlink tx & rx urb */
> + usb_kill_urb(cardp->tx_urb);
> + usb_kill_urb(cardp->rx_urb);
> + usb_kill_urb(cardp->cmd_urb);
> +
> + usb_free_urb(cardp->tx_urb);
> + cardp->tx_urb = NULL;
> +
> + usb_free_urb(cardp->rx_urb);
> + cardp->rx_urb = NULL;
> +
> + usb_free_urb(cardp->cmd_urb);
> + cardp->cmd_urb = NULL;
> +
> + kfree(cardp->ep_out_buf);
> + cardp->ep_out_buf = NULL;
> +}
> +
> +static void if_usb_setup_firmware(struct lbtf_private *priv)
> +{
> + struct if_usb_card *cardp = priv->card;
> + struct cmd_ds_set_boot2_ver b2_cmd;
> +
> + if_usb_submit_rx_urb(cardp);
> + b2_cmd.hdr.size = cpu_to_le16(sizeof(b2_cmd));
> + b2_cmd.action = 0;
> + b2_cmd.version = cardp->boot2_version;
> +
> + if (lbtf_cmd_with_response(priv, CMD_SET_BOOT2_VER, &b2_cmd))
> + printk(KERN_INFO "libertastf: setting boot2 version failed\n");
> +}
> +
> +static void if_usb_fw_timeo(unsigned long priv)
> +{
> + struct if_usb_card *cardp = (void *)priv;
> +
> + if (!cardp->fwdnldover)
> + /* Download timed out */
> + cardp->priv->surpriseremoved = 1;
> + wake_up(&cardp->fw_wq);
> +}
> +
> +/**
> + * if_usb_probe - sets the configuration values
> + *
> + * @ifnum interface number
> + * @id pointer to usb_device_id
> + *
> + * Returns: 0 on success, error code on failure
> + */
> +static int if_usb_probe(struct usb_interface *intf,
> + const struct usb_device_id *id)
> +{
> + struct usb_device *udev;
> + struct usb_host_interface *iface_desc;
> + struct usb_endpoint_descriptor *endpoint;
> + struct lbtf_private *priv;
> + struct if_usb_card *cardp;
> + int i;
> +
> + udev = interface_to_usbdev(intf);
> +
> + cardp = kzalloc(sizeof(struct if_usb_card), GFP_KERNEL);
> + if (!cardp)
> + goto error;
> +
> + setup_timer(&cardp->fw_timeout, if_usb_fw_timeo, (unsigned long)cardp);
> + init_waitqueue_head(&cardp->fw_wq);
> +
> + cardp->udev = udev;
> + iface_desc = intf->cur_altsetting;
> +
> + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
> + endpoint = &iface_desc->endpoint[i].desc;
> + if (usb_endpoint_is_bulk_in(endpoint)) {
> + cardp->ep_in_size =
> + le16_to_cpu(endpoint->wMaxPacketSize);
> + cardp->ep_in = usb_endpoint_num(endpoint);
> + } else if (usb_endpoint_is_bulk_out(endpoint)) {
> + cardp->ep_out_size =
> + le16_to_cpu(endpoint->wMaxPacketSize);
> + cardp->ep_out = usb_endpoint_num(endpoint);
> + }
> + }
> + if (!cardp->ep_out_size || !cardp->ep_in_size)
> + /* Endpoints not found */
> + goto dealloc;
> +
> + cardp->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
> + if (!cardp->rx_urb)
> + goto dealloc;
> +
> + cardp->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
> + if (!cardp->tx_urb)
> + goto dealloc;
> +
> + cardp->cmd_urb = usb_alloc_urb(0, GFP_KERNEL);
> + if (!cardp->cmd_urb)
> + goto dealloc;
> +
> + cardp->ep_out_buf = kmalloc(MRVDRV_ETH_TX_PACKET_BUFFER_SIZE,
> + GFP_KERNEL);
> + if (!cardp->ep_out_buf)
> + goto dealloc;
> +
> + priv = lbtf_add_card(cardp, &udev->dev);
> + if (!priv)
> + goto dealloc;
> +
> + cardp->priv = priv;
> +
> + priv->hw_host_to_card = if_usb_host_to_card;
> + priv->hw_prog_firmware = if_usb_prog_firmware;
> + priv->hw_reset_device = if_usb_reset_device;
> + cardp->boot2_version = udev->descriptor.bcdDevice;
> +
> + usb_get_dev(udev);
> + usb_set_intfdata(intf, cardp);
> +
> + return 0;
> +
> +dealloc:
> + if_usb_free(cardp);
> +error:
> + return -ENOMEM;
> +}
> +
> +/**
> + * if_usb_disconnect - free resource and cleanup
> + *
> + * @intf USB interface structure
> + */
> +static void if_usb_disconnect(struct usb_interface *intf)
> +{
> + struct if_usb_card *cardp = usb_get_intfdata(intf);
> + struct lbtf_private *priv = (struct lbtf_private *) cardp->priv;
> +
> + if_usb_reset_device(cardp);
> +
> + if (priv)
> + lbtf_remove_card(priv);
> +
> + /* Unlink and free urb */
> + if_usb_free(cardp);
> +
> + usb_set_intfdata(intf, NULL);
> + usb_put_dev(interface_to_usbdev(intf));
> +}
> +
> +/**
> + * if_usb_send_fw_pkt - This function downloads the FW
> + *
> + * @priv pointer to struct lbtf_private
> + *
> + * Returns: 0
> + */
> +static int if_usb_send_fw_pkt(struct if_usb_card *cardp)
> +{
> + struct fwdata *fwdata = cardp->ep_out_buf;
> + uint8_t *firmware = cardp->fw->data;
> +
> + /* If we got a CRC failure on the last block, back
> + up and retry it */
> + if (!cardp->CRC_OK) {
> + cardp->totalbytes = cardp->fwlastblksent;
> + cardp->fwseqnum--;
> + }
> +
> + /* struct fwdata (which we sent to the card) has an
> + extra __le32 field in between the header and the data,
> + which is not in the struct fwheader in the actual
> + firmware binary. Insert the seqnum in the middle... */
> + memcpy(&fwdata->hdr, &firmware[cardp->totalbytes],
> + sizeof(struct fwheader));
> +
> + cardp->fwlastblksent = cardp->totalbytes;
> + cardp->totalbytes += sizeof(struct fwheader);
> +
> + memcpy(fwdata->data, &firmware[cardp->totalbytes],
> + le32_to_cpu(fwdata->hdr.datalength));
> +
> + fwdata->seqnum = cpu_to_le32(++cardp->fwseqnum);
> + cardp->totalbytes += le32_to_cpu(fwdata->hdr.datalength);
> +
> + usb_tx_block(cardp, cardp->ep_out_buf, sizeof(struct fwdata) +
> + le32_to_cpu(fwdata->hdr.datalength), 0);
> +
> + if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_LAST_BLOCK))
> + /* Host has finished FW downloading
> + * Donwloading FW JUMP BLOCK
> + */
> + cardp->fwfinalblk = 1;
> +
> + return 0;
> +}
> +
> +static int if_usb_reset_device(struct if_usb_card *cardp)
> +{
> + struct cmd_ds_802_11_reset *cmd = cardp->ep_out_buf + 4;
> + int ret;
> +
> + *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST);
> +
> + cmd->hdr.command = cpu_to_le16(CMD_802_11_RESET);
> + cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_802_11_reset));
> + cmd->hdr.result = cpu_to_le16(0);
> + cmd->hdr.seqnum = cpu_to_le16(0x5a5a);
> + cmd->action = cpu_to_le16(CMD_ACT_HALT);
> + usb_tx_block(cardp, cardp->ep_out_buf,
> + 4 + sizeof(struct cmd_ds_802_11_reset), 0);
> +
> + msleep(100);
> + ret = usb_reset_device(cardp->udev);
> + msleep(100);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(if_usb_reset_device);
> +
> +/**
> + * usb_tx_block - transfer data to the device
> + *
> + * @priv pointer to struct lbtf_private
> + * @payload pointer to payload data
> + * @nb data length
> + * @data non-zero for data, zero for commands
> + *
> + * Returns: 0 on success, nonzero otherwise.
> + */
> +static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload,
> + uint16_t nb, u8 data)
> +{
> + struct urb *urb;
> +
> + /* check if device is removed */
> + if (cardp->priv->surpriseremoved)
> + return -1;
> +
> + if (data)
> + urb = cardp->tx_urb;
> + else
> + urb = cardp->cmd_urb;
> +
> + usb_fill_bulk_urb(urb, cardp->udev,
> + usb_sndbulkpipe(cardp->udev,
> + cardp->ep_out),
> + payload, nb, if_usb_write_bulk_callback, cardp);
> +
> + urb->transfer_flags |= URB_ZERO_PACKET;
> +
> + if (usb_submit_urb(urb, GFP_ATOMIC))
> + return -1;
> + return 0;
> +}
> +
> +static int __if_usb_submit_rx_urb(struct if_usb_card *cardp,
> + void (*callbackfn)(struct urb *urb))
> +{
> + struct sk_buff *skb;
> +
> + skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
> + if (!skb)
> + return -1;
> +
> + cardp->rx_skb = skb;
> +
> + /* Fill the receive configuration URB and initialise the Rx call back */
> + usb_fill_bulk_urb(cardp->rx_urb, cardp->udev,
> + usb_rcvbulkpipe(cardp->udev, cardp->ep_in),
> + (void *) (skb->tail),
> + MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn, cardp);
> +
> + cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET;
> +
> + if (usb_submit_urb(cardp->rx_urb, GFP_ATOMIC)) {
> + kfree_skb(skb);
> + cardp->rx_skb = NULL;
> + return -1;
> + } else
> + return 0;
> +}
> +
> +static int if_usb_submit_rx_urb_fwload(struct if_usb_card *cardp)
> +{
> + return __if_usb_submit_rx_urb(cardp, &if_usb_receive_fwload);
> +}
> +
> +static int if_usb_submit_rx_urb(struct if_usb_card *cardp)
> +{
> + return __if_usb_submit_rx_urb(cardp, &if_usb_receive);
> +}
> +
> +static void if_usb_receive_fwload(struct urb *urb)
> +{
> + struct if_usb_card *cardp = urb->context;
> + struct sk_buff *skb = cardp->rx_skb;
> + struct fwsyncheader *syncfwheader;
> + struct bootcmdresp bcmdresp;
> +
> + if (urb->status) {
> + kfree_skb(skb);
> + return;
> + }
> +
> + if (cardp->fwdnldover) {
> + __le32 *tmp = (__le32 *)(skb->data);
> +
> + if (tmp[0] == cpu_to_le32(CMD_TYPE_INDICATION) &&
> + tmp[1] == cpu_to_le32(MACREG_INT_CODE_FIRMWARE_READY))
> + /* Firmware ready event received */
> + wake_up(&cardp->fw_wq);
> + else
> + if_usb_submit_rx_urb_fwload(cardp);
> + kfree_skb(skb);
> + return;
> + }
> + if (cardp->bootcmdresp <= 0) {
> + memcpy(&bcmdresp, skb->data, sizeof(bcmdresp));
> +
> + if (le16_to_cpu(cardp->udev->descriptor.bcdDevice) < 0x3106) {
> + kfree_skb(skb);
> + if_usb_submit_rx_urb_fwload(cardp);
> + cardp->bootcmdresp = 1;
> + /* Received valid boot command response */
> + return;
> + }
> + if (bcmdresp.magic != cpu_to_le32(BOOT_CMD_MAGIC_NUMBER)) {
> + if (bcmdresp.magic == cpu_to_le32(CMD_TYPE_REQUEST) ||
> + bcmdresp.magic == cpu_to_le32(CMD_TYPE_DATA) ||
> + bcmdresp.magic == cpu_to_le32(CMD_TYPE_INDICATION))
> + cardp->bootcmdresp = -1;
> + } else if (bcmdresp.cmd == BOOT_CMD_FW_BY_USB &&
> + bcmdresp.result == BOOT_CMD_RESP_OK)
> + cardp->bootcmdresp = 1;
> +
> + kfree_skb(skb);
> + if_usb_submit_rx_urb_fwload(cardp);
> + return;
> + }
> +
> + syncfwheader = kmalloc(sizeof(struct fwsyncheader), GFP_ATOMIC);
> + if (!syncfwheader) {
> + kfree_skb(skb);
> + return;
> + }
> +
> + memcpy(syncfwheader, skb->data, sizeof(struct fwsyncheader));
> +
> + if (!syncfwheader->cmd)
> + cardp->CRC_OK = 1;
> + else
> + cardp->CRC_OK = 0;
> + kfree_skb(skb);
> +
> + /* reschedule timer for 200ms hence */
> + mod_timer(&cardp->fw_timeout, jiffies + (HZ/5));
> +
> + if (cardp->fwfinalblk) {
> + cardp->fwdnldover = 1;
> + goto exit;
> + }
> +
> + if_usb_send_fw_pkt(cardp);
> +
> + exit:
> + if_usb_submit_rx_urb_fwload(cardp);
> +
> + kfree(syncfwheader);
> +
> + return;
> +}
> +
> +#define MRVDRV_MIN_PKT_LEN 30
> +
> +static inline void process_cmdtypedata(int recvlength, struct sk_buff *skb,
> + struct if_usb_card *cardp,
> + struct lbtf_private *priv)
> +{
> + if (recvlength > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + MESSAGE_HEADER_LEN
> + || recvlength < MRVDRV_MIN_PKT_LEN) {
> + kfree_skb(skb);
> + return;
> + }
> +
> + skb_put(skb, recvlength);
> + skb_pull(skb, MESSAGE_HEADER_LEN);
> + lbtf_rx(priv, skb);
> +}
> +
> +static inline void process_cmdrequest(int recvlength, uint8_t *recvbuff,
> + struct sk_buff *skb,
> + struct if_usb_card *cardp,
> + struct lbtf_private *priv)
> +{
> + if (recvlength > LBS_CMD_BUFFER_SIZE) {
> + kfree_skb(skb);
> + return;
> + }
> +
> + if (!in_interrupt())
> + BUG();
> +
> + spin_lock(&priv->driver_lock);
> + memcpy(priv->cmd_resp_buff, recvbuff + MESSAGE_HEADER_LEN,
> + recvlength - MESSAGE_HEADER_LEN);
> + kfree_skb(skb);
> + lbtf_cmd_response_rx(priv);
> + spin_unlock(&priv->driver_lock);
> +}
> +
> +/**
> + * if_usb_receive - read data received from the device.
> + *
> + * @urb pointer to struct urb
> + */
> +static void if_usb_receive(struct urb *urb)
> +{
> + struct if_usb_card *cardp = urb->context;
> + struct sk_buff *skb = cardp->rx_skb;
> + struct lbtf_private *priv = cardp->priv;
> + int recvlength = urb->actual_length;
> + uint8_t *recvbuff = NULL;
> + uint32_t recvtype = 0;
> + __le32 *pkt = (__le32 *) skb->data;
> +
> + if (recvlength) {
> + if (urb->status) {
> + kfree_skb(skb);
> + goto setup_for_next;
> + }
> +
> + recvbuff = skb->data;
> + recvtype = le32_to_cpu(pkt[0]);
> + } else if (urb->status) {
> + kfree_skb(skb);
> + return;
> + }
> +
> + switch (recvtype) {
> + case CMD_TYPE_DATA:
> + process_cmdtypedata(recvlength, skb, cardp, priv);
> + break;
> +
> + case CMD_TYPE_REQUEST:
> + process_cmdrequest(recvlength, recvbuff, skb, cardp, priv);
> + break;
> +
> + case CMD_TYPE_INDICATION:
> + {
> + /* Event cause handling */
> + u32 event_cause = le32_to_cpu(pkt[1]);
> +
> + /* Icky undocumented magic special case */
> + if (event_cause & 0xffff0000) {
> + u16 tmp;
> + u8 retrycnt;
> + u8 failure;
> +
> + tmp = event_cause >> 16;
> + retrycnt = tmp & 0x00ff;
> + failure = (tmp & 0xff00) >> 8;
> + lbtf_send_tx_feedback(priv, retrycnt, failure);
> + } else
> + printk(KERN_DEBUG
> + "Unsupported notification %d received\n",
> + event_cause);
> + kfree_skb(skb);
> + break;
> + }
> + default:
> + printk(KERN_DEBUG "libertastf: unknown command type 0x%X\n",
> + recvtype);
> + kfree_skb(skb);
> + break;
> + }
> +
> +setup_for_next:
> + if_usb_submit_rx_urb(cardp);
> +}
> +
> +/**
> + * if_usb_host_to_card - Download data to the device
> + *
> + * @priv pointer to struct lbtf_private structure
> + * @type type of data
> + * @buf pointer to data buffer
> + * @len number of bytes
> + *
> + * Returns: 0 on success, nonzero otherwise
> + */
> +static int if_usb_host_to_card(struct lbtf_private *priv, uint8_t type,
> + uint8_t *payload, uint16_t nb)
> +{
> + struct if_usb_card *cardp = priv->card;
> + u8 data = 0;
> +
> + if (type == MVMS_CMD) {
> + *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST);
> + } else {
> + *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_DATA);
> + data = 1;
> + }
> +
> + memcpy((cardp->ep_out_buf + MESSAGE_HEADER_LEN), payload, nb);
> +
> + return usb_tx_block(cardp, cardp->ep_out_buf, nb + MESSAGE_HEADER_LEN,
> + data);
> +}
> +
> +/**
> + * if_usb_issue_boot_command - Issue boot command to Boot2.
> + *
> + * @ivalue 1 boots from FW by USB-Download, 2 boots from FW in EEPROM.
> + *
> + * Returns: 0
> + */
> +static int if_usb_issue_boot_command(struct if_usb_card *cardp, int ivalue)
> +{
> + struct bootcmd *bootcmd = cardp->ep_out_buf;
> +
> + /* Prepare command */
> + bootcmd->magic = cpu_to_le32(BOOT_CMD_MAGIC_NUMBER);
> + bootcmd->cmd = ivalue;
> + memset(bootcmd->pad, 0, sizeof(bootcmd->pad));
> +
> + /* Issue command */
> + usb_tx_block(cardp, cardp->ep_out_buf, sizeof(*bootcmd), 0);
> +
> + return 0;
> +}
> +
> +
> +/**
> + * check_fwfile_format - Check the validity of Boot2/FW image.
> + *
> + * @data pointer to image
> + * @totlen image length
> + *
> + * Returns: 0 if the image is valid, nonzero otherwise.
> + */
> +static int check_fwfile_format(uint8_t *data, uint32_t totlen)
> +{
> + uint32_t bincmd, exit;
> + uint32_t blksize, offset, len;
> + int ret;
> +
> + ret = 1;
> + exit = len = 0;
> +
> + do {
> + struct fwheader *fwh = (void *)data;
> +
> + bincmd = le32_to_cpu(fwh->dnldcmd);
> + blksize = le32_to_cpu(fwh->datalength);
> + switch (bincmd) {
> + case FW_HAS_DATA_TO_RECV:
> + offset = sizeof(struct fwheader) + blksize;
> + data += offset;
> + len += offset;
> + if (len >= totlen)
> + exit = 1;
> + break;
> + case FW_HAS_LAST_BLOCK:
> + exit = 1;
> + ret = 0;
> + break;
> + default:
> + exit = 1;
> + break;
> + }
> + } while (!exit);
> +
> + if (ret)
> + printk(KERN_INFO
> + "libertastf: firmware file format check failed\n");
> + return ret;
> +}
> +
> +
> +static int if_usb_prog_firmware(struct if_usb_card *cardp)
> +{
> + int i = 0;
> + static int reset_count = 10;
> + int ret = 0;
> +
> + ret = request_firmware(&cardp->fw, lbtf_fw_name, &cardp->udev->dev);
> + if (ret < 0) {
> + printk(KERN_INFO "libertastf: firmware %s not found\n",
> + lbtf_fw_name);
> + goto done;
> + }
> +
> + if (check_fwfile_format(cardp->fw->data, cardp->fw->size))
> + goto release_fw;
> +
> +restart:
> + if (if_usb_submit_rx_urb_fwload(cardp) < 0) {
> + ret = -1;
> + goto release_fw;
> + }
> +
> + cardp->bootcmdresp = 0;
> + do {
> + int j = 0;
> + i++;
> + /* Issue Boot command = 1, Boot from Download-FW */
> + if_usb_issue_boot_command(cardp, BOOT_CMD_FW_BY_USB);
> + /* wait for command response */
> + do {
> + j++;
> + msleep_interruptible(100);
> + } while (cardp->bootcmdresp == 0 && j < 10);
> + } while (cardp->bootcmdresp == 0 && i < 5);
> +
> + if (cardp->bootcmdresp <= 0) {
> + if (--reset_count >= 0) {
> + if_usb_reset_device(cardp);
> + goto restart;
> + }
> + return -1;
> + }
> +
> + i = 0;
> +
> + cardp->totalbytes = 0;
> + cardp->fwlastblksent = 0;
> + cardp->CRC_OK = 1;
> + cardp->fwdnldover = 0;
> + cardp->fwseqnum = -1;
> + cardp->totalbytes = 0;
> + cardp->fwfinalblk = 0;
> +
> + /* Send the first firmware packet... */
> + if_usb_send_fw_pkt(cardp);
> +
> + /* ... and wait for the process to complete */
> + wait_event_interruptible(cardp->fw_wq, cardp->priv->surpriseremoved ||
> + cardp->fwdnldover);
> +
> + del_timer_sync(&cardp->fw_timeout);
> + usb_kill_urb(cardp->rx_urb);
> +
> + if (!cardp->fwdnldover) {
> + printk(KERN_INFO "libertastf: failed to load fw,"
> + " resetting device!\n");
> + if (--reset_count >= 0) {
> + if_usb_reset_device(cardp);
> + goto restart;
> + }
> +
> + printk(KERN_INFO "libertastf: fw download failure\n");
> + ret = -1;
> + goto release_fw;
> + }
> +
> + cardp->priv->fw_ready = 1;
> +
> + release_fw:
> + release_firmware(cardp->fw);
> + cardp->fw = NULL;
> +
> + if_usb_setup_firmware(cardp->priv);
> +
> + done:
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(if_usb_prog_firmware);
> +
> +
> +#define if_usb_suspend NULL
> +#define if_usb_resume NULL
> +
> +static struct usb_driver if_usb_driver = {
> + .name = DRV_NAME,
> + .probe = if_usb_probe,
> + .disconnect = if_usb_disconnect,
> + .id_table = if_usb_table,
> + .suspend = if_usb_suspend,
> + .resume = if_usb_resume,
> +};
> +
> +static int __init if_usb_init_module(void)
> +{
> + int ret = 0;
> +
> + ret = usb_register(&if_usb_driver);
> + return ret;
> +}
> +
> +static void __exit if_usb_exit_module(void)
> +{
> + usb_deregister(&if_usb_driver);
> +}
> +
> +module_init(if_usb_init_module);
> +module_exit(if_usb_exit_module);
> +
> +MODULE_DESCRIPTION("8388 USB WLAN Thinfirm Driver");
> +MODULE_AUTHOR("Cozybit Inc.");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/net/wireless/libertastf/if_usb.h b/drivers/net/wireless/libertastf/if_usb.h
> new file mode 100644
> index 0000000..74118a1
> --- /dev/null
> +++ b/drivers/net/wireless/libertastf/if_usb.h
> @@ -0,0 +1,97 @@
> +/*
> + * Copyright (C) 2008, cozybit Inc.
> + * Copyright (C) 2003-2006, Marvell International Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License
> + */
> +#include <linux/wait.h>
> +#include <linux/timer.h>
> +
> +struct lbtf_private;
> +
> +/**
> + * This file contains definition for USB interface.
> + */
> +#define CMD_TYPE_REQUEST 0xF00DFACE
> +#define CMD_TYPE_DATA 0xBEADC0DE
> +#define CMD_TYPE_INDICATION 0xBEEFFACE
> +
> +#define BOOT_CMD_FW_BY_USB 0x01
> +#define BOOT_CMD_FW_IN_EEPROM 0x02
> +#define BOOT_CMD_UPDATE_BOOT2 0x03
> +#define BOOT_CMD_UPDATE_FW 0x04
> +#define BOOT_CMD_MAGIC_NUMBER 0x4C56524D /* LVRM */
> +
> +struct bootcmd {
> + __le32 magic;
> + uint8_t cmd;
> + uint8_t pad[11];
> +};
> +
> +#define BOOT_CMD_RESP_OK 0x0001
> +#define BOOT_CMD_RESP_FAIL 0x0000
> +
> +struct bootcmdresp {
> + __le32 magic;
> + uint8_t cmd;
> + uint8_t result;
> + uint8_t pad[2];
> +};
> +
> +/** USB card description structure*/
> +struct if_usb_card {
> + struct usb_device *udev;
> + struct urb *rx_urb, *tx_urb, *cmd_urb;
> + struct lbtf_private *priv;
> +
> + struct sk_buff *rx_skb;
> +
> + uint8_t ep_in;
> + uint8_t ep_out;
> +
> + int8_t bootcmdresp;
> +
> + int ep_in_size;
> +
> + void *ep_out_buf;
> + int ep_out_size;
> +
> + const struct firmware *fw;
> + struct timer_list fw_timeout;
> + wait_queue_head_t fw_wq;
> + uint32_t fwseqnum;
> + uint32_t totalbytes;
> + uint32_t fwlastblksent;
> + uint8_t CRC_OK;
> + uint8_t fwdnldover;
> + uint8_t fwfinalblk;
> +
> + __le16 boot2_version;
> +};
> +
> +/** fwheader */
> +struct fwheader {
> + __le32 dnldcmd;
> + __le32 baseaddr;
> + __le32 datalength;
> + __le32 CRC;
> +};
> +
> +#define FW_MAX_DATA_BLK_SIZE 600
> +/** FWData */
> +struct fwdata {
> + struct fwheader hdr;
> + __le32 seqnum;
> + uint8_t data[0];
> +};
> +
> +/** fwsyncheader */
> +struct fwsyncheader {
> + __le32 cmd;
> + __le32 seqnum;
> +};
> +
> +#define FW_HAS_DATA_TO_RECV 0x00000001
> +#define FW_HAS_LAST_BLOCK 0x00000004
prev parent reply other threads:[~2008-07-27 15:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-10 15:19 [PATCH 5/6] libertastf: usb specific functions Luis Carlos Cobo
2008-07-27 15:57 ` Dan Williams [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1217174228.2700.35.camel@localhost.localdomain \
--to=dcbw@redhat.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=luisca@cozybit.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox