linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: kilroyd@googlemail.com
To: linux-wireless@vger.kernel.org
Cc: proski@gnu.org, orinoco-devel@lists.sourceforge.net,
	David Kilroy <kilroyd@gmail.com>
Subject: [PATCH 01/19] orinoco: Add ESSID specific scanning for Agere fw
Date: Sat,  2 Aug 2008 11:14:15 +0100	[thread overview]
Message-ID: <1217672073-7094-2-git-send-email-kilroyd@gmail.com> (raw)
In-Reply-To: <1217672073-7094-1-git-send-email-kilroyd@gmail.com>

Pass the ESSID to the card.

This allows 'iwlist eth1 scan essid <essid>' to work, and will help
with routers setup not to broadcast the ESSID.

Signed-off-by: David Kilroy <kilroyd@gmail.com>
---
 drivers/net/wireless/orinoco.c |   20 +++++++++++++++++++-
 1 files changed, 19 insertions(+), 1 deletions(-)

diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index b047306..e9dca96 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -2989,6 +2989,11 @@ static int orinoco_ioctl_getiwrange(struct net_device *dev,
 	range->min_r_time = 0;
 	range->max_r_time = 65535 * 1000;	/* ??? */
 
+	if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
+		range->scan_capa = IW_SCAN_CAPA_ESSID;
+	else
+		range->scan_capa = IW_SCAN_CAPA_NONE;
+
 	/* Event capability (kernel) */
 	IW_EVENT_CAPA_SET_KERNEL(range->event_capa);
 	/* Event capability (driver) */
@@ -3958,6 +3963,7 @@ static int orinoco_ioctl_setscan(struct net_device *dev,
 {
 	struct orinoco_private *priv = netdev_priv(dev);
 	hermes_t *hw = &priv->hw;
+	struct iw_scan_req *si = (struct iw_scan_req *) extra;
 	int err = 0;
 	unsigned long flags;
 
@@ -4019,7 +4025,19 @@ static int orinoco_ioctl_setscan(struct net_device *dev,
 		}
 		break;
 		case FIRMWARE_TYPE_AGERE:
-			err = hermes_write_wordrec(hw, USER_BAP,
+			if (priv->scan_mode & IW_SCAN_THIS_ESSID) {
+				struct hermes_idstring idbuf;
+				size_t len = min(sizeof(idbuf.val),
+						 (size_t) si->essid_len);
+				idbuf.len = cpu_to_le16(len);
+				memcpy(idbuf.val, si->essid, len);
+
+				err = hermes_write_ltv(hw, USER_BAP,
+					       HERMES_RID_CNFSCANSSID_AGERE,
+					       HERMES_BYTES_TO_RECLEN(len + 2),
+					       &idbuf);
+			} else
+				err = hermes_write_wordrec(hw, USER_BAP,
 						   HERMES_RID_CNFSCANSSID_AGERE,
 						   0);	/* Any ESSID */
 			if (err)
-- 
1.5.4.5


  reply	other threads:[~2008-08-02 10:14 UTC|newest]

Thread overview: 75+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-08-02 10:14 [PATCH 00/19] orinoco: WPA for Agere based cards kilroyd
2008-08-02 10:14 ` kilroyd [this message]
2008-08-02 10:14   ` [PATCH 02/19] orinoco: Update scan translation kilroyd
2008-08-02 10:14     ` [PATCH 03/19] orinoco: Specify all three parameters to every Hermes command kilroyd
2008-08-02 10:14       ` [PATCH 04/19] orinoco: Move EXPORT_SYMBOL declarations next to exported function kilroyd
2008-08-02 10:14         ` [PATCH 05/19] orinoco: Add function to execute Hermes initialisation commands synchronously kilroyd
2008-08-02 10:14           ` [PATCH 06/19] orinoco: Move firmware download functionality into new module kilroyd
2008-08-02 10:14             ` [PATCH 07/19] orinoco: Make firmware download logic more generic kilroyd
2008-08-02 10:14               ` [PATCH 08/19] orinoco: Extend hermes_dld routines for Agere firmware kilroyd
2008-08-02 10:14                 ` [PATCH 09/19] orinoco: Invoke firmware download in main driver kilroyd
2008-08-02 10:14                   ` [PATCH 10/19] orinoco: Fix transmit for Agere/Lucent with fw 9.x kilroyd
2008-08-02 10:14                     ` [PATCH 11/19] orinoco: address checkpatch typedef warning kilroyd
2008-08-02 10:14                       ` [PATCH 12/19] orinoco: Use extended Agere scans available on 9.x series firmwares kilroyd
2008-08-02 10:14                         ` [PATCH 13/19] orinoco: Don't use boolean parameter to record encoding type kilroyd
2008-08-02 10:14                           ` [PATCH 14/19] orinoco: Split wevent work thread from wevent sending kilroyd
2008-08-02 10:14                             ` [PATCH 15/19] orinoco: Use a macro to define wireless handlers kilroyd
2008-08-02 10:14                               ` [PATCH 16/19] orinoco: Add WE-18 ioctls for WPA kilroyd
2008-08-02 10:14                                 ` [PATCH 17/19] orinoco: Send association events to userspace kilroyd
2008-08-02 10:14                                   ` [PATCH 18/19] orinoco: Process bulk of receive interrupt in a tasklet kilroyd
2008-08-02 10:14                                     ` [PATCH 19/19] orinoco: Add MIC on TX and check on RX kilroyd
2008-08-02 10:22                               ` [PATCH 15/19] orinoco: Use a macro to define wireless handlers kilroyd
2008-08-04  4:48   ` [PATCH 01/19] orinoco: Add ESSID specific scanning for Agere fw Pavel Roskin
2008-08-04 15:34     ` Dan Williams
2008-08-05 16:22       ` Jean Tourrilhes
2008-09-02 23:06         ` Jean Tourrilhes
2008-09-08 12:48           ` Pavel Roskin
2008-09-08 16:45             ` Jean Tourrilhes
2008-09-08 18:32             ` Jean Tourrilhes
2008-09-09 18:37               ` Dave
2008-09-09 19:33                 ` Jean Tourrilhes
2008-09-09 21:20                   ` Tomas Winkler
2008-09-09 21:44                     ` Jean Tourrilhes
2008-09-13  4:17               ` Pavel Roskin
2008-09-15 21:17                 ` Jean Tourrilhes
2008-08-05 21:15       ` Pavel Roskin
2008-08-05 21:50         ` Dave
2008-08-05 21:55         ` Dan Williams
2008-08-05 22:48           ` Pavel Roskin
2008-08-06 13:13             ` Dan Williams
2008-08-06 13:48               ` Pavel Roskin
2008-08-06 19:26                 ` Dave
2008-08-06 19:29               ` Dave
2008-08-06 20:56                 ` Dan Williams
2008-08-06 21:03                   ` Dan Williams
2008-08-06 21:08                   ` Dave
2008-08-07  2:48                     ` Dan Williams
2008-08-07 18:43                       ` Dave
2008-08-07 19:42                         ` Dan Williams
2008-08-07 20:17                           ` Dave
2008-08-07 20:46                             ` Dan Williams
2008-08-07 21:08                           ` Dave
2008-08-08 14:51                             ` Dan Williams
2008-08-04  3:57 ` [PATCH 00/19] orinoco: WPA for Agere based cards Pavel Roskin
2008-08-04 23:09   ` Dave
2008-08-04 23:28     ` Dan Williams
2008-08-06  0:37       ` Pavel Roskin
2008-08-06 18:33         ` Dave
2008-08-06 21:01           ` Dan Williams
2008-08-07  8:06             ` Jouni Malinen
2008-08-06 21:28         ` [PATCH 12/19] orinoco: Use extended Agere scans available on 9.x series firmwares kilroyd
2008-08-05 22:38     ` [Orinoco-devel] [PATCH 00/19] orinoco: WPA for Agere based cards Pavel Roskin
2008-08-08  0:02       ` Dave
2008-08-05 22:59     ` Pavel Roskin
2008-08-05 23:46       ` Dave
2008-08-06  0:41         ` [Orinoco-devel] " Pavel Roskin
2008-08-05 22:22   ` [PATCH 07/19] orinoco: Make firmware download logic more generic kilroyd
2008-08-05 22:22     ` [PATCH 09/19] orinoco: Invoke firmware download in main driver kilroyd
2008-08-05 22:22       ` [PATCH 12/19] orinoco: Use extended Agere scans available on 9.x series firmwares kilroyd
2008-08-20 19:28 ` [PATCH 00/19] orinoco: WPA for Agere based cards John W. Linville
2008-08-20 20:49   ` Dave
2008-08-20 21:06     ` Larry Finger
2008-08-20 21:07     ` Johannes Berg
2008-08-20 21:22       ` Johannes Berg
2008-08-20 23:07         ` Dave
2008-08-21  6:42           ` Johannes Berg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1217672073-7094-2-git-send-email-kilroyd@gmail.com \
    --to=kilroyd@googlemail.com \
    --cc=kilroyd@gmail.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=orinoco-devel@lists.sourceforge.net \
    --cc=proski@gnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).