From: Johannes Berg <johannes@sipsolutions.net>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Subject: [PATCH] mac80211: remove beacon counters
Date: Fri, 12 Sep 2008 11:05:39 +0200 [thread overview]
Message-ID: <1221210339.11204.19.camel@johannes.berg> (raw)
The beacon counters mac80211 keeps are only used for debugfs,
unfortunately, they are incorrect for many hardware designs,
namely any design that has a beacon template. Hence, remove the
counters so we don't create the impression they are usable.
This also allows removing the beacon MESH #ifdef again.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
---
net/mac80211/debugfs_netdev.c | 6 ------
net/mac80211/ieee80211_i.h | 5 -----
net/mac80211/tx.c | 9 ---------
3 files changed, 20 deletions(-)
--- everything.orig/net/mac80211/tx.c 2008-09-12 11:01:48.000000000 +0200
+++ everything/net/mac80211/tx.c 2008-09-12 11:02:31.000000000 +0200
@@ -1808,7 +1808,6 @@ struct sk_buff *ieee80211_beacon_get(str
struct rate_selection rsel;
struct beacon_data *beacon;
struct ieee80211_supported_band *sband;
- int *num_beacons;
enum ieee80211_band band = local->hw.conf.channel->band;
sband = local->hw.wiphy->bands[band];
@@ -1856,8 +1855,6 @@ struct sk_buff *ieee80211_beacon_get(str
if (beacon->tail)
memcpy(skb_put(skb, beacon->tail_len),
beacon->tail, beacon->tail_len);
-
- num_beacons = &ap->num_beacons;
} else
goto out;
} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
@@ -1875,8 +1872,6 @@ struct sk_buff *ieee80211_beacon_get(str
hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_BEACON);
- num_beacons = &ifsta->num_beacons;
-#ifdef CONFIG_MAC80211_MESH
} else if (ieee80211_vif_is_mesh(&sdata->vif)) {
struct ieee80211_mgmt *mgmt;
u8 *pos;
@@ -1904,9 +1899,6 @@ struct sk_buff *ieee80211_beacon_get(str
*pos++ = 0x0;
mesh_mgmt_ies_add(skb, sdata);
-
- num_beacons = &sdata->u.mesh.num_beacons;
-#endif
} else {
WARN_ON(1);
goto out;
@@ -1943,7 +1935,6 @@ struct sk_buff *ieee80211_beacon_get(str
info->antenna_sel_tx = local->hw.conf.antenna_sel_tx;
info->control.retry_limit = 1;
- (*num_beacons)++;
out:
rcu_read_unlock();
return skb;
--- everything.orig/net/mac80211/debugfs_netdev.c 2008-09-12 11:01:44.000000000 +0200
+++ everything/net/mac80211/debugfs_netdev.c 2008-09-12 11:01:59.000000000 +0200
@@ -173,7 +173,6 @@ IEEE80211_IF_FILE(assoc_tries, u.sta.ass
IEEE80211_IF_FILE(auth_algs, u.sta.auth_algs, HEX);
IEEE80211_IF_FILE(auth_alg, u.sta.auth_alg, DEC);
IEEE80211_IF_FILE(auth_transaction, u.sta.auth_transaction, DEC);
-IEEE80211_IF_FILE(num_beacons_sta, u.sta.num_beacons, DEC);
static ssize_t ieee80211_if_fmt_flags(
const struct ieee80211_sub_if_data *sdata, char *buf, int buflen)
@@ -192,7 +191,6 @@ __IEEE80211_IF_FILE(flags);
/* AP attributes */
IEEE80211_IF_FILE(num_sta_ps, u.ap.num_sta_ps, ATOMIC);
IEEE80211_IF_FILE(dtim_count, u.ap.dtim_count, DEC);
-IEEE80211_IF_FILE(num_beacons, u.ap.num_beacons, DEC);
static ssize_t ieee80211_if_fmt_num_buffered_multicast(
const struct ieee80211_sub_if_data *sdata, char *buf, int buflen)
@@ -265,7 +263,6 @@ static void add_sta_files(struct ieee802
DEBUGFS_ADD(auth_alg, sta);
DEBUGFS_ADD(auth_transaction, sta);
DEBUGFS_ADD(flags, sta);
- DEBUGFS_ADD(num_beacons_sta, sta);
}
static void add_ap_files(struct ieee80211_sub_if_data *sdata)
@@ -276,7 +273,6 @@ static void add_ap_files(struct ieee8021
DEBUGFS_ADD(num_sta_ps, ap);
DEBUGFS_ADD(dtim_count, ap);
- DEBUGFS_ADD(num_beacons, ap);
DEBUGFS_ADD(num_buffered_multicast, ap);
}
@@ -398,7 +394,6 @@ static void del_sta_files(struct ieee802
DEBUGFS_DEL(auth_alg, sta);
DEBUGFS_DEL(auth_transaction, sta);
DEBUGFS_DEL(flags, sta);
- DEBUGFS_DEL(num_beacons_sta, sta);
}
static void del_ap_files(struct ieee80211_sub_if_data *sdata)
@@ -409,7 +404,6 @@ static void del_ap_files(struct ieee8021
DEBUGFS_DEL(num_sta_ps, ap);
DEBUGFS_DEL(dtim_count, ap);
- DEBUGFS_DEL(num_beacons, ap);
DEBUGFS_DEL(num_buffered_multicast, ap);
}
--- everything.orig/net/mac80211/ieee80211_i.h 2008-09-12 11:01:44.000000000 +0200
+++ everything/net/mac80211/ieee80211_i.h 2008-09-12 11:01:59.000000000 +0200
@@ -229,7 +229,6 @@ struct ieee80211_if_ap {
struct sk_buff_head ps_bc_buf;
atomic_t num_sta_ps; /* number of stations in PS mode */
int dtim_count;
- int num_beacons; /* number of TXed beacon frames for this BSS */
};
struct ieee80211_if_wds {
@@ -352,7 +351,6 @@ struct ieee80211_if_sta {
u32 supp_rates_bits[IEEE80211_NUM_BANDS];
int wmm_last_param_set;
- int num_beacons; /* number of TXed beacon frames by this STA */
};
struct ieee80211_if_mesh {
@@ -388,7 +386,6 @@ struct ieee80211_if_mesh {
struct mesh_config mshcfg;
u32 mesh_seqnum;
bool accepting_plinks;
- int num_beacons;
};
#ifdef CONFIG_MAC80211_MESH
@@ -484,7 +481,6 @@ struct ieee80211_sub_if_data {
struct dentry *auth_alg;
struct dentry *auth_transaction;
struct dentry *flags;
- struct dentry *num_beacons_sta;
struct dentry *force_unicast_rateidx;
struct dentry *max_ratectrl_rateidx;
} sta;
@@ -492,7 +488,6 @@ struct ieee80211_sub_if_data {
struct dentry *drop_unencrypted;
struct dentry *num_sta_ps;
struct dentry *dtim_count;
- struct dentry *num_beacons;
struct dentry *force_unicast_rateidx;
struct dentry *max_ratectrl_rateidx;
struct dentry *num_buffered_multicast;
reply other threads:[~2008-09-12 9:06 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1221210339.11204.19.camel@johannes.berg \
--to=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox