linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dan Williams <dcbw@redhat.com>
To: Javier Cardona <javier@cozybit.com>
Cc: linux-wireless@vger.kernel.org, libertas-dev@lists.infradead.org
Subject: Re: [PATCH v2] libertas: Reduce the WPA key installation time.
Date: Wed, 17 Sep 2008 00:12:34 -0400	[thread overview]
Message-ID: <1221624754.23335.8.camel@localhost.localdomain> (raw)
In-Reply-To: <48d05b30.09038e0a.6b12.ffffb982@mx.google.com>

On Tue, 2008-09-16 at 18:08 -0700, Javier Cardona wrote:
> WPA requires that the PTK is installed immediately after the 4-way handshake
> in order to properly decrypt the subsequent incoming EAPOL-GTK frame.  If the
> PTK is not enabled by the time the EAPOL-GTK frame arrives, the frame is
> dropped and the supplicant does not receive the group key.
> 
> This will happen with fast Access Points that send the EAPOL-GTK frame before
> the suplicant has successfully installed and enabled the PTK.  To mitigate
> this situation, this patch simplifies and accelerates the SIOCSIWENCODEEXT
> execution.
> 
> This patch resolves OLPC ticket 7825 (http://dev.laptop.org/ticket/7825)
> 
> Signed-off-by: Javier Cardona <javier@cozybit.com>

If this works for you, then:

Acked-by: Dan Williams <dcbw@redhat.com>

> ---
>  drivers/net/wireless/libertas/dev.h  |    1 +
>  drivers/net/wireless/libertas/wext.c |   36 +++++++++++++++++++++++++++++++--
>  2 files changed, 34 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
> index acb889e..f6f3753 100644
> --- a/drivers/net/wireless/libertas/dev.h
> +++ b/drivers/net/wireless/libertas/dev.h
> @@ -58,6 +58,7 @@ struct lbs_802_11_security {
>  	u8 WPA2enabled;
>  	u8 wep_enabled;
>  	u8 auth_mode;
> +	u32 key_mgmt;
>  };
>  
>  /** Current Basic Service Set State Structure */
> diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c
> index d86fcf0..5436b34 100644
> --- a/drivers/net/wireless/libertas/wext.c
> +++ b/drivers/net/wireless/libertas/wext.c
> @@ -30,6 +30,14 @@ static inline void lbs_postpone_association_work(struct lbs_private *priv)
>  	queue_delayed_work(priv->work_thread, &priv->assoc_work, HZ / 2);
>  }
>  
> +static inline void lbs_do_association_work(struct lbs_private *priv)
> +{
> +	if (priv->surpriseremoved)
> +		return;
> +	cancel_delayed_work(&priv->assoc_work);
> +	queue_delayed_work(priv->work_thread, &priv->assoc_work, 0);
> +}
> +
>  static inline void lbs_cancel_association_work(struct lbs_private *priv)
>  {
>  	cancel_delayed_work(&priv->assoc_work);
> @@ -1585,12 +1593,26 @@ static int lbs_set_encodeext(struct net_device *dev,
>  			set_bit(ASSOC_FLAG_SECINFO, &assoc_req->flags);
>  		}
>  
> -		disable_wep (assoc_req);
> +		/* Only disable wep if necessary: can't waste time here. */
> +		if (priv->mac_control & CMD_ACT_MAC_WEP_ENABLE)
> +			disable_wep(assoc_req);
>  	}
>  
>  out:
>  	if (ret == 0) {
> -		lbs_postpone_association_work(priv);
> +		/* 802.1x and WPA rekeying must happen as quickly as possible,
> +		 * especially during the 4-way handshake; thus if in
> +		 * infrastructure mode, and either (a) 802.1x is enabled or
> +		 * (b) WPA is being used, set the key right away.
> +		 */
> +		if (assoc_req->mode == IW_MODE_INFRA &&
> +		    ((assoc_req->secinfo.key_mgmt & IW_AUTH_KEY_MGMT_802_1X) ||
> +		     (assoc_req->secinfo.key_mgmt & IW_AUTH_KEY_MGMT_PSK) ||
> +		      assoc_req->secinfo.WPAenabled ||
> +		      assoc_req->secinfo.WPA2enabled)) {
> +			lbs_do_association_work(priv);
> +		} else
> +			lbs_postpone_association_work(priv);
>  	} else {
>  		lbs_cancel_association_work(priv);
>  	}
> @@ -1698,13 +1720,17 @@ static int lbs_set_auth(struct net_device *dev,
>  	case IW_AUTH_TKIP_COUNTERMEASURES:
>  	case IW_AUTH_CIPHER_PAIRWISE:
>  	case IW_AUTH_CIPHER_GROUP:
> -	case IW_AUTH_KEY_MGMT:
>  	case IW_AUTH_DROP_UNENCRYPTED:
>  		/*
>  		 * libertas does not use these parameters
>  		 */
>  		break;
>  
> +	case IW_AUTH_KEY_MGMT:
> +		assoc_req->secinfo.key_mgmt = dwrq->value;
> +		updated = 1;
> +		break;
> +
>  	case IW_AUTH_WPA_VERSION:
>  		if (dwrq->value & IW_AUTH_WPA_VERSION_DISABLED) {
>  			assoc_req->secinfo.WPAenabled = 0;
> @@ -1784,6 +1810,10 @@ static int lbs_get_auth(struct net_device *dev,
>  	lbs_deb_enter(LBS_DEB_WEXT);
>  
>  	switch (dwrq->flags & IW_AUTH_INDEX) {
> +	case IW_AUTH_KEY_MGMT:
> +		dwrq->value = priv->secinfo.key_mgmt;
> +		break;
> +
>  	case IW_AUTH_WPA_VERSION:
>  		dwrq->value = 0;
>  		if (priv->secinfo.WPAenabled)


      reply	other threads:[~2008-09-17  4:12 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-09-17  1:08 [PATCH v2] libertas: Reduce the WPA key installation time Javier Cardona
2008-09-17  4:12 ` Dan Williams [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1221624754.23335.8.camel@localhost.localdomain \
    --to=dcbw@redhat.com \
    --cc=javier@cozybit.com \
    --cc=libertas-dev@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).