From: Harvey Harrison <harvey.harrison@gmail.com>
To: Michael Buesch <mb@bu3sch.de>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Subject: [PATCH 4/8] b43: use the b43_phy masking/setting helpers where possible from lo.c
Date: Fri, 03 Oct 2008 13:48:47 -0700 [thread overview]
Message-ID: <1223066927.6512.29.camel@brick> (raw)
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
---
drivers/net/wireless/b43/lo.c | 31 ++++++++-----------------------
1 files changed, 8 insertions(+), 23 deletions(-)
diff --git a/drivers/net/wireless/b43/lo.c b/drivers/net/wireless/b43/lo.c
index a6c185b..b41f2de 100644
--- a/drivers/net/wireless/b43/lo.c
+++ b/drivers/net/wireless/b43/lo.c
@@ -393,18 +393,10 @@ static void lo_measure_setup(struct b43_wldev *dev,
sav->phy_cck_14 = b43_phy_read(dev, B43_PHY_CCK(0x14));
sav->phy_hpwr_tssictl = b43_phy_read(dev, B43_PHY_HPWR_TSSICTL);
- b43_phy_write(dev, B43_PHY_HPWR_TSSICTL,
- b43_phy_read(dev, B43_PHY_HPWR_TSSICTL)
- | 0x100);
- b43_phy_write(dev, B43_PHY_EXTG(0x01),
- b43_phy_read(dev, B43_PHY_EXTG(0x01))
- | 0x40);
- b43_phy_write(dev, B43_PHY_DACCTL,
- b43_phy_read(dev, B43_PHY_DACCTL)
- | 0x40);
- b43_phy_write(dev, B43_PHY_CCK(0x14),
- b43_phy_read(dev, B43_PHY_CCK(0x14))
- | 0x200);
+ b43_phy_set(dev, B43_PHY_HPWR_TSSICTL, 0x100);
+ b43_phy_set(dev, B43_PHY_EXTG(0x01), 0x40);
+ b43_phy_set(dev, B43_PHY_DACCTL, 0x40);
+ b43_phy_set(dev, B43_PHY_CCK(0x14), 0x200);
}
if (phy->type == B43_PHYTYPE_B &&
phy->radio_ver == 0x2050 && phy->radio_rev < 6) {
@@ -421,17 +413,10 @@ static void lo_measure_setup(struct b43_wldev *dev,
sav->phy_cck_3E = b43_phy_read(dev, B43_PHY_CCK(0x3E));
sav->phy_crs0 = b43_phy_read(dev, B43_PHY_CRS0);
- b43_phy_write(dev, B43_PHY_CLASSCTL,
- b43_phy_read(dev, B43_PHY_CLASSCTL)
- & 0xFFFC);
- b43_phy_write(dev, B43_PHY_CRS0, b43_phy_read(dev, B43_PHY_CRS0)
- & 0x7FFF);
- b43_phy_write(dev, B43_PHY_ANALOGOVER,
- b43_phy_read(dev, B43_PHY_ANALOGOVER)
- | 0x0003);
- b43_phy_write(dev, B43_PHY_ANALOGOVERVAL,
- b43_phy_read(dev, B43_PHY_ANALOGOVERVAL)
- & 0xFFFC);
+ b43_phy_mask(dev, B43_PHY_CLASSCTL, 0xFFFC);
+ b43_phy_mask(dev, B43_PHY_CRS0, 0x7FFF);
+ b43_phy_set(dev, B43_PHY_ANALOGOVER, 0x0003);
+ b43_phy_mask(dev, B43_PHY_ANALOGOVERVAL, 0xFFFC);
if (phy->type == B43_PHYTYPE_G) {
if ((phy->rev >= 7) &&
(sprom->boardflags_lo & B43_BFL_EXTLNA)) {
--
1.6.0.2.471.g47a76
reply other threads:[~2008-10-03 20:48 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1223066927.6512.29.camel@brick \
--to=harvey.harrison@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=mb@bu3sch.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).