Re: [2.6.28-rc2]: iwl4965 doesn't connect / cfg80211 failure

[reinette chatre <reinette.chatre@intel.com>]

On Thu, 2008-10-30 at 10:24 -0700, Mirco Tischler wrote:
> On Wed, 29 Oct 2008 14:18:04 +0800, Zhu Yi wrote:
> > Can you try attached patch?
> > 
> > Thanks,
> > -yi
> I did. Didn't solve the problems but here's the output:

That helped us to obtain more information. Could you please try commit
9685e33a2c919c1e95cb7072988fc1e0f0bad3d9 ?

Reproduced here for convenience:

commit 9685e33a2c919c1e95cb7072988fc1e0f0bad3d9
Author: Mohamed Abbas <mohamed.abbas@intel.com>
Date:   Thu Oct 23 23:48:54 2008 -0700

    iwlwifi: clear scanning bits upon failure
    
    In iwl_bg_request_scan function, if we could not send a
    scan command it will go to done.
    In done it does the right thing to call mac80211 with
    scan complete, but the problem is STATUS_SCAN_HW is still
    set causing any future scan to fail. Fix by clearing the scanning status
    bits if scan fails.
    
    Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
    Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
    Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 3379b41..b0abf89 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -834,6 +834,13 @@ static void iwl_bg_request_scan(struct work_struct *data)
 	return;
 
  done:
+	/* Cannot perform scan. Make sure we clear scanning
+	* bits from status so next scan request can be performed.
+	* If we don't clear scanning status bit here all next scan
+	* will fail
+	*/
+	clear_bit(STATUS_SCAN_HW, &priv->status);
+	clear_bit(STATUS_SCANNING, &priv->status);
 	/* inform mac80211 scan aborted */
 	queue_work(priv->workqueue, &priv->scan_completed);
 	mutex_unlock(&priv->mutex);