linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dan Williams <dcbw@redhat.com>
To: Anna Neal <anna@cozybit.com>
Cc: linux-wireless@vger.kernel.org, libertas-dev@lists.infradead.org
Subject: Re: [PATCH] libertas: Create sysfs entry for changing the mesh probe response limit
Date: Wed, 10 Dec 2008 12:03:11 -0500	[thread overview]
Message-ID: <1228928591.28590.13.camel@localhost.localdomain> (raw)
In-Reply-To: <493effb1.0610c00a.3f59.7990@mx.google.com>

On Tue, 2008-12-09 at 13:23 -0800, Anna Neal wrote:
> This patch adds the ability to change the number of probe response retries sent
> by the mesh interface.
> 
> In dense networks it is recommended to change this value to zero to reduce
> traffic congestion.

Does this sort of thing also apply to the mesh functionality in
mac80211?  Just trying to figure out if this is usb8388 mesh specific,
or general functionality.

Dan

> Signed-off-by: Anna Neal <anna@cozybit.com>
> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com>
> ---
>  drivers/net/wireless/libertas/host.h |    1 +
>  drivers/net/wireless/libertas/main.c |   60 ++++++++++++++++++++++++++++++++++
>  2 files changed, 61 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h
> index a17b778..277ff19 100644
> --- a/drivers/net/wireless/libertas/host.h
> +++ b/drivers/net/wireless/libertas/host.h
> @@ -245,6 +245,7 @@ enum cmd_mesh_access_opts {
>  	CMD_ACT_MESH_GET_ROUTE_EXP,
>  	CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
>  	CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
> +	CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
>  };
>  
>  /* Define actions and types for CMD_MESH_CONFIG */
> diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
> index c320264..f7caef9 100644
> --- a/drivers/net/wireless/libertas/main.c
> +++ b/drivers/net/wireless/libertas/main.c
> @@ -257,6 +257,58 @@ static ssize_t lbs_anycast_set(struct device *dev,
>  	return strlen(buf);
>  }
>  
> +/**
> + * @brief Get function for sysfs attribute prb_rsp_limit
> + */
> +static ssize_t lbs_prb_rsp_limit_get(struct device *dev,
> +		struct device_attribute *attr, char *buf)
> +{
> +	struct lbs_private *priv = to_net_dev(dev)->priv;
> +	struct cmd_ds_mesh_access mesh_access;
> +	int ret;
> +	u32 retry_limit;
> +
> +	memset(&mesh_access, 0, sizeof(mesh_access));
> +	mesh_access.data[0] = cpu_to_le32(CMD_ACT_GET);
> +
> +	ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT,
> +			&mesh_access);
> +	if (ret)
> +		return ret;
> +
> +	retry_limit = le32_to_cpu(mesh_access.data[1]);
> +	return snprintf(buf, 10, "%d\n", retry_limit);
> +}
> +
> +/**
> + * @brief Set function for sysfs attribute prb_rsp_limit
> + */
> +static ssize_t lbs_prb_rsp_limit_set(struct device *dev,
> +		struct device_attribute *attr, const char *buf, size_t count)
> +{
> +	struct lbs_private *priv = to_net_dev(dev)->priv;
> +	struct cmd_ds_mesh_access mesh_access;
> +	int ret;
> +	unsigned long retry_limit;
> +
> +	memset(&mesh_access, 0, sizeof(mesh_access));
> +	mesh_access.data[0] = cpu_to_le32(CMD_ACT_SET);
> +
> +	if (!strict_strtoul(buf, 10, &retry_limit))
> +		return -ENOTSUPP;
> +	if (retry_limit > 15)
> +		return -ENOTSUPP;
> +
> +	mesh_access.data[1] = cpu_to_le32(retry_limit);
> +
> +	ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT,
> +			&mesh_access);
> +	if (ret)
> +		return ret;
> +
> +	return strlen(buf);
> +}
> +
>  static int lbs_add_rtap(struct lbs_private *priv);
>  static void lbs_remove_rtap(struct lbs_private *priv);
>  static int lbs_add_mesh(struct lbs_private *priv);
> @@ -375,8 +427,16 @@ static DEVICE_ATTR(lbs_mesh, 0644, lbs_mesh_get, lbs_mesh_set);
>   */
>  static DEVICE_ATTR(anycast_mask, 0644, lbs_anycast_get, lbs_anycast_set);
>  
> +/**
> + * prb_rsp_limit attribute to be exported per mshX interface
> + * through sysfs (/sys/class/net/mshX/prb_rsp_limit)
> + */
> +static DEVICE_ATTR(prb_rsp_limit, 0644, lbs_prb_rsp_limit_get,
> +		lbs_prb_rsp_limit_set);
> +
>  static struct attribute *lbs_mesh_sysfs_entries[] = {
>  	&dev_attr_anycast_mask.attr,
> +	&dev_attr_prb_rsp_limit.attr,
>  	NULL,
>  };
>  


  reply	other threads:[~2008-12-10 17:04 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-12-09 21:23 [PATCH] libertas: Create sysfs entry for changing the mesh probe response limit Anna Neal
2008-12-10 17:03 ` Dan Williams [this message]
2008-12-10 19:44   ` Anna Neal
2008-12-10 21:36     ` Javier Cardona

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1228928591.28590.13.camel@localhost.localdomain \
    --to=dcbw@redhat.com \
    --cc=anna@cozybit.com \
    --cc=libertas-dev@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).