From: Vasanthakumar Thiagarajan <vasanth@atheros.com>
To: <linux-wireless@vger.kernel.org>
Subject: [PATCH] mac80211: Scale down to non-HT association with TKIP/WEP as pairwise cipher
Date: Tue, 23 Dec 2008 21:30:50 +0530 [thread overview]
Message-ID: <1230048051-4522-1-git-send-email-vasanth@atheros.com> (raw)
As TKIP is not updated to new security needs which arise when
TKIP is used to encrypt A-MPDU aggregated data frames, IEEE802.11n
does not allow any cipher other than CCMP (Which has new extensions
defined) as pairwise cipher between HT peers.
When such configuration (TKIP/WEP in HT) is forced, we still
associate in non-HT mode (11a/b/g).
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
---
net/mac80211/ieee80211_i.h | 1 +
net/mac80211/iface.c | 3 ++-
net/mac80211/mlme.c | 9 ++++++++-
net/mac80211/wext.c | 12 +++++++++++-
4 files changed, 22 insertions(+), 3 deletions(-)
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index f3eec98..5f8ad88 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -258,6 +258,7 @@ struct mesh_preq_queue {
#define IEEE80211_STA_AUTO_BSSID_SEL BIT(11)
#define IEEE80211_STA_AUTO_CHANNEL_SEL BIT(12)
#define IEEE80211_STA_PRIVACY_INVOKED BIT(13)
+#define IEEE80211_STA_TKIP_WEP_USED BIT(14)
/* flags for MLME request */
#define IEEE80211_STA_REQ_SCAN 0
#define IEEE80211_STA_REQ_DIRECT_PROBE 1
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 5abbc3f..19cfc0a 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -459,7 +459,8 @@ static int ieee80211_stop(struct net_device *dev)
synchronize_rcu();
skb_queue_purge(&sdata->u.sta.skb_queue);
- sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED;
+ sdata->u.sta.flags &= ~(IEEE80211_STA_PRIVACY_INVOKED |
+ IEEE80211_STA_TKIP_WEP_USED);
kfree(sdata->u.sta.extra_ie);
sdata->u.sta.extra_ie = NULL;
sdata->u.sta.extra_ie_len = 0;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index c75d0ea..4998dc5 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -391,10 +391,17 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
}
/* wmm support is a must to HT */
+ /*
+ * IEEE802.11n does not allow TKIP/WEP as pairwise
+ * ciphers in HT mode. We still associate in non-ht
+ * mode (11a/b/g) if any one of these ciphers is
+ * configured as pairwise.
+ */
if (wmm && (ifsta->flags & IEEE80211_STA_WMM_ENABLED) &&
sband->ht_cap.ht_supported &&
(ht_ie = ieee80211_bss_get_ie(bss, WLAN_EID_HT_INFORMATION)) &&
- ht_ie[1] >= sizeof(struct ieee80211_ht_info)) {
+ ht_ie[1] >= sizeof(struct ieee80211_ht_info) &&
+ (!(ifsta->flags & IEEE80211_STA_TKIP_WEP_USED))) {
struct ieee80211_ht_info *ht_info =
(struct ieee80211_ht_info *)(ht_ie + 2);
u16 cap = sband->ht_cap.cap;
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index 7162d58..011592f 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -903,12 +903,22 @@ static int ieee80211_ioctl_siwauth(struct net_device *dev,
switch (data->flags & IW_AUTH_INDEX) {
case IW_AUTH_WPA_VERSION:
- case IW_AUTH_CIPHER_PAIRWISE:
case IW_AUTH_CIPHER_GROUP:
case IW_AUTH_WPA_ENABLED:
case IW_AUTH_RX_UNENCRYPTED_EAPOL:
case IW_AUTH_KEY_MGMT:
break;
+ case IW_AUTH_CIPHER_PAIRWISE:
+ if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+ if (data->value & (IW_AUTH_CIPHER_WEP40 |
+ IW_AUTH_CIPHER_WEP104 | IW_AUTH_CIPHER_TKIP))
+ sdata->u.sta.flags |=
+ IEEE80211_STA_TKIP_WEP_USED;
+ else
+ sdata->u.sta.flags &=
+ ~IEEE80211_STA_TKIP_WEP_USED;
+ }
+ break;
case IW_AUTH_DROP_UNENCRYPTED:
sdata->drop_unencrypted = !!data->value;
break;
--
1.5.5.1
next reply other threads:[~2008-12-23 16:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-23 16:00 Vasanthakumar Thiagarajan [this message]
2008-12-23 17:06 ` [PATCH] mac80211: Scale down to non-HT association with TKIP/WEP as pairwise cipher Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1230048051-4522-1-git-send-email-vasanth@atheros.com \
--to=vasanth@atheros.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox