Re: 4965AGN Not Associating

[Zhu Yi <yi.zhu@intel.com>]

On Thu, 2008-12-25 at 03:58 +0800, Delphi Real Estate wrote:
> Running Kubuntu Hardy and typically compile a custom kernel.  First I
> downloaded and compiled compat-wireless-old.tar.bz2 and compiled it to
> my kernel 2.6.24.  Driver loaded fine and the wlan0 interface came up,
> but would no longer associate as the old driver did.  Rebooted, but a
> second or so after the blue wireless light came on, the kernel crashed
> with an Aieeee!  No way to see exactly where or why, as it'd scrolled
> off the screen and there's nothing in the logs.

You can either use fb to make your console show more lines and take a
picture for it or use netconsole to capture the log.

> So I tried just compiling kernels 2.6.27 and .28 to test their iwlagn
> functionality, but unfortunately no version of .27 or .28 will compile
> on my laptop.  .27 does compile on my HTPC, but not where it counts:
>   OFFSETS arch/x86/boot/offsets.h
>   OBJCOPY arch/x86/boot/vmlinux.bin
>   AS      arch/x86/boot/header.o
>   LD      arch/x86/boot/setup.elf
>   OBJCOPY arch/x86/boot/setup.bin
>   BUILD   arch/x86/boot/bzImage
> Root device is (8, 1)
> Setup is 11916 bytes (padded to 12288 bytes).
> System is 2904 kB
> CRC 30db084d
> Kernel: arch/x86/boot/bzImage is ready  (#1)
> ERROR: "snd_hwdep_new" [ubuntu/misc/media/snd-bt-sco.ko] undefined!
> WARNING: modpost: Found 4 section mismatch(es).
> To see full details build your kernel with:
> 'make CONFIG_DEBUG_SECTION_MISMATCH=y'
> make[1]: *** [__modpost] Error 1
> make: *** [modules] Error 2

CONFIG_SND_HWDEP?

Also make sure you get the correct firmware.

Thanks,
-yi