From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from senator.holtmann.net ([87.106.208.187]:53412 "EHLO mail.holtmann.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750807AbZAEXKv (ORCPT ); Mon, 5 Jan 2009 18:10:51 -0500 Received: from [192.168.1.194] (S0106001cf062885c.vc.shawcable.net [24.82.150.230]) by mail.holtmann.org (Postfix) with ESMTP id 52A2C8B547 for ; Tue, 6 Jan 2009 00:10:51 +0100 (CET) Subject: iwlagn: Microcode SW error detected. Restarting 0x2000000 From: Marcel Holtmann To: linux-wireless@vger.kernel.org Content-Type: text/plain Date: Tue, 06 Jan 2009 00:10:48 +0100 Message-Id: <1231197048.4858.9.camel@californication> (sfid-20090106_001054_849135_F9C407C4) Mime-Version: 1.0 Sender: linux-wireless-owner@vger.kernel.org List-ID: Hi guys, so I am running into this one on my X61: iwlagn 0000:03:00.0: PCI INT A disabled iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k iwlagn: Copyright(c) 2003-2008 Intel Corporation vendor=8086 device=2841 iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: setting latency timer to 64 iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 iwlagn: Tunable channels: 11 802.11bg, 13 802.11a channels wmaster0 (iwlagn): not using net_device_ops yet phy1: Selected rate control algorithm 'iwl-agn-rs' wlan0 (iwlagn): not using net_device_ops yet vendor=8086 device=2841 iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode iwlagn loaded firmware version 228.57.2.23 ADDRCONF(NETDEV_UP): wlan0: link is not ready iwlagn: Microcode SW error detected. Restarting 0x2000000. It renders the wireless device useless and module unload/reload doesn't help either. Is this the AMT issue again or something totally different with the latest ucode? This machine is running Linus' tip from today. I am currently not running wireless-testing since it is not synced up with Linus tree at the moment. Regards Marcel