* TP-Link TL-WN422G with RF MAXIM_NEW_RF
@ 2009-01-19 19:03 Petr Menšík
0 siblings, 0 replies; only message in thread
From: Petr Menšík @ 2009-01-19 19:03 UTC (permalink / raw)
To: linux-wireless
[-- Attachment #1: Type: text/plain, Size: 852 bytes --]
Hello,
i bought today new usb wifi card with hope it will work under linux, as
it is zydas based card. It does not work however.
It does report itself as:
Bus 007 Device 011: ID 0ace:1215 ZyDAS WLA-54L WiFi
Advertised name of it
manufacturer:TP-LINK model:TL-WN422G
After reading firmware it reports error:
[ 655.364272] zd1211rw 5-2:1.0: RF MAXIM_NEW_RF 0x8 is not supported
It tries to reload firmware, after while it begin returning -110 error.
Are there any chances it will ever work? What is needed to get
initialization procedure? I have drivers for most MS Windows from 98 to
vista. Are somewhere guidelines to extract needed initialization for
unknown RF chips? What can i do for it? I know some programming, but
never did real disassembling. Is there way to get more info about used
chips without breaking cover?
Yours,
Petr Mensik
[-- Attachment #2: zydas-kern.log --]
[-- Type: text/x-log, Size: 3331 bytes --]
Jan 19 18:54:16 mentuzok2 kernel: [ 637.960428] usb 5-2: Could not load firmware file zd1211/zd1211b_ub. Error number -2
Jan 19 18:54:16 mentuzok2 kernel: [ 637.960434] zd1211rw 5-2:1.0: couldn't load firmware. Error number -2
Jan 19 18:54:33 mentuzok2 kernel: [ 655.311427] firmware: requesting zd1211/zd1211b_ub
Jan 19 18:54:33 mentuzok2 kernel: [ 655.323560] firmware: requesting zd1211/zd1211b_uphr
Jan 19 18:54:33 mentuzok2 kernel: [ 655.364272] zd1211rw 5-2:1.0: RF MAXIM_NEW_RF 0x8 is not supported
Jan 19 18:54:50 mentuzok2 kernel: [ 672.410088] firmware: requesting zd1211/zd1211b_ub
Jan 19 18:54:50 mentuzok2 kernel: [ 672.422701] firmware: requesting zd1211/zd1211b_uphr
Jan 19 18:55:01 mentuzok2 kernel: [ 683.815428] usb 5-2: USB disconnect, address 5
Jan 19 18:55:05 mentuzok2 kernel: [ 688.441554] usb 5-2: new high speed USB device using ehci_hcd and address 6
Jan 19 18:55:06 mentuzok2 kernel: [ 688.574621] usb 5-2: configuration #1 chosen from 1 choice
Jan 19 18:55:06 mentuzok2 kernel: [ 688.690632] usb 5-2: reset high speed USB device using ehci_hcd and address 6
Jan 19 18:55:06 mentuzok2 kernel: [ 688.828078] phy1: Selected rate control algorithm 'pid'
Jan 19 18:55:06 mentuzok2 kernel: [ 688.830800] zd1211rw 5-2:1.0: phy1
Jan 19 18:55:06 mentuzok2 kernel: [ 688.830859] usb 5-2: New USB device found, idVendor=0ace, idProduct=1215
Jan 19 18:55:06 mentuzok2 kernel: [ 688.830861] usb 5-2: New USB device strings: Mfr=16, Product=32, SerialNumber=0
Jan 19 18:55:06 mentuzok2 kernel: [ 688.830863] usb 5-2: Product: USB2.0 WLAN
Jan 19 18:55:06 mentuzok2 kernel: [ 688.830864] usb 5-2: Manufacturer: ZyDAS
Jan 19 18:55:06 mentuzok2 kernel: [ 688.936931] firmware: requesting zd1211/zd1211b_ub
Jan 19 18:55:06 mentuzok2 kernel: [ 688.950233] firmware: requesting zd1211/zd1211b_uphr
Jan 19 18:55:06 mentuzok2 kernel: [ 688.989798] zd1211rw 5-2:1.0: RF MAXIM_NEW_RF 0x8 is not supported
Jan 19 18:55:09 mentuzok2 kernel: [ 691.608881] firmware: requesting zd1211/zd1211b_ub
Jan 19 18:55:09 mentuzok2 kernel: [ 691.620796] firmware: requesting zd1211/zd1211b_uphr
Jan 19 18:55:31 mentuzok2 kernel: [ 713.865106] firmware: requesting zd1211/zd1211b_ub
Jan 19 18:55:31 mentuzok2 kernel: [ 713.878265] firmware: requesting zd1211/zd1211b_uphr
Jan 19 18:55:32 mentuzok2 kernel: [ 714.889227] usb 5-2: USB control request for firmware upload failed. Error number -110
Jan 19 18:55:32 mentuzok2 kernel: [ 714.889233] usb 5-2: Could not upload firmware code uph. Error number -110
Jan 19 18:55:32 mentuzok2 kernel: [ 714.889247] zd1211rw 5-2:1.0: couldn't load firmware. Error number -110
Jan 19 18:55:49 mentuzok2 kernel: [ 732.126942] firmware: requesting zd1211/zd1211b_ub
Jan 19 18:55:49 mentuzok2 kernel: [ 732.138999] firmware: requesting zd1211/zd1211b_uphr
Jan 19 18:55:50 mentuzok2 kernel: [ 733.152586] usb 5-2: USB control request for firmware upload failed. Error number -110
Jan 19 18:55:50 mentuzok2 kernel: [ 733.152591] usb 5-2: Could not upload firmware code uph. Error number -110
Jan 19 18:55:50 mentuzok2 kernel: [ 733.152611] zd1211rw 5-2:1.0: couldn't load firmware. Error number -110
Jan 19 18:56:07 mentuzok2 kernel: [ 750.454139] firmware: requesting zd1211/zd1211b_ub
Jan 19 18:56:07 mentuzok2 kernel: [ 750.466555] firmware: requesting zd1211/zd1211b_uphr
[-- Attachment #3: zydas-lsusb.txt --]
[-- Type: text/plain, Size: 2694 bytes --]
Bus 007 Device 011: ID 0ace:1215 ZyDAS WLA-54L WiFi
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x0ace ZyDAS
idProduct 0x1215 WLA-54L WiFi
bcdDevice 48.10
iManufacturer 16
iProduct 32
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
[-- Attachment #4: zydas-tplink-lsusb.txt --]
[-- Type: text/plain, Size: 3091 bytes --]
Bus 005 Device 003: ID 0ace:1215 ZyDAS WLA-54L WiFi
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x0ace ZyDAS
idProduct 0x1215 WLA-54L WiFi
bcdDevice 48.10
iManufacturer 16 ZyDAS
iProduct 32 USB2.0 WLAN
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-01-19 19:10 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-01-19 19:03 TP-Link TL-WN422G with RF MAXIM_NEW_RF Petr Menšík
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).