Linux wireless drivers development
 help / color / mirror / Atom feed
From: Johannes Berg <johannes@sipsolutions.net>
To: Sujith <Sujith.Manoharan@atheros.com>
Cc: linville@tuxdriver.com, linux-wireless@vger.kernel.org,
	Jouni.Malinen@Atheros.com
Subject: Re: [PATCH v2] mac80211: Extend the rate control API with an update callback
Date: Thu, 12 Feb 2009 10:17:28 +0100	[thread overview]
Message-ID: <1234430248.16004.83.camel@johannes.local> (raw)
In-Reply-To: <18835.48357.7271.454072@gargle.gargle.HOWL>

[-- Attachment #1: Type: text/plain, Size: 4358 bytes --]

On Thu, 2009-02-12 at 11:38 +0530, Sujith wrote:
> The AP can switch dynamically between 20/40 Mhz channel width,
> in which case we switch the local operating channel, but the
> rate control algorithm is not notified. This patch adds a new callback
> to indicate such changes to the RC algorithm.
> 
> Currently, HT channel width change is notified, but this callback
> can be used to indicate any new requirements that might come up later on.

Looks good to me.

> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>

Acked-by: Johannes Berg <johannes@sipsolutions.net>

> ---
> v2:
> --
> * Rebased over [PATCH] mac80211: split IBSS/managed code
> 
>  include/net/mac80211.h |   13 +++++++++++++
>  net/mac80211/ht.c      |   13 +++++++++++++
>  net/mac80211/rate.h    |   12 ++++++++++++
>  3 files changed, 38 insertions(+), 0 deletions(-)
> 
> diff --git a/include/net/mac80211.h b/include/net/mac80211.h
> index 31fd8ba..e01c63a 100644
> --- a/include/net/mac80211.h
> +++ b/include/net/mac80211.h
> @@ -1975,6 +1975,16 @@ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_hw *hw,
>  /* Rate control API */
>  
>  /**
> + * enum rate_control_changed - flags to indicate which parameter changed
> + *
> + * @IEEE80211_RC_HT_CHANGED: The HT parameters of the operating channel have
> + *	changed, rate control algorithm can update its internal state if needed.
> + */
> +enum rate_control_changed {
> +	IEEE80211_RC_HT_CHANGED = BIT(0)
> +};
> +
> +/**
>   * struct ieee80211_tx_rate_control - rate control information for/from RC algo
>   *
>   * @hw: The hardware the algorithm is invoked for.
> @@ -2010,6 +2020,9 @@ struct rate_control_ops {
>  	void *(*alloc_sta)(void *priv, struct ieee80211_sta *sta, gfp_t gfp);
>  	void (*rate_init)(void *priv, struct ieee80211_supported_band *sband,
>  			  struct ieee80211_sta *sta, void *priv_sta);
> +	void (*rate_update)(void *priv, struct ieee80211_supported_band *sband,
> +			    struct ieee80211_sta *sta,
> +			    void *priv_sta, u32 changed);
>  	void (*free_sta)(void *priv, struct ieee80211_sta *sta,
>  			 void *priv_sta);
>  
> diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
> index 69b6e9a..4e3c72f 100644
> --- a/net/mac80211/ht.c
> +++ b/net/mac80211/ht.c
> @@ -17,6 +17,7 @@
>  #include <net/wireless.h>
>  #include <net/mac80211.h>
>  #include "ieee80211_i.h"
> +#include "rate.h"
>  
>  void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband,
>  				       struct ieee80211_ht_cap *ht_cap_ie,
> @@ -93,7 +94,9 @@ u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
>  {
>  	struct ieee80211_local *local = sdata->local;
>  	struct ieee80211_supported_band *sband;
> +	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
>  	struct ieee80211_bss_ht_conf ht;
> +	struct sta_info *sta;
>  	u32 changed = 0;
>  	bool enable_ht = true, ht_changed;
>  	enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
> @@ -136,6 +139,16 @@ u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
>  	if (ht_changed) {
>                  /* channel_type change automatically detected */
>  		ieee80211_hw_config(local, 0);
> +
> +		rcu_read_lock();
> +
> +		sta = sta_info_get(local, ifmgd->bssid);
> +		if (sta)
> +			rate_control_rate_update(local, sband, sta,
> +						 IEEE80211_RC_HT_CHANGED);
> +
> +		rcu_read_unlock();
> +
>          }
>  
>  	/* disable HT */
> diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h
> index 928da62..b9164c9 100644
> --- a/net/mac80211/rate.h
> +++ b/net/mac80211/rate.h
> @@ -62,6 +62,18 @@ static inline void rate_control_rate_init(struct sta_info *sta)
>  	ref->ops->rate_init(ref->priv, sband, ista, priv_sta);
>  }
>  
> +static inline void rate_control_rate_update(struct ieee80211_local *local,
> +				    struct ieee80211_supported_band *sband,
> +				    struct sta_info *sta, u32 changed)
> +{
> +	struct rate_control_ref *ref = local->rate_ctrl;
> +	struct ieee80211_sta *ista = &sta->sta;
> +	void *priv_sta = sta->rate_ctrl_priv;
> +
> +	if (ref->ops->rate_update)
> +		ref->ops->rate_update(ref->priv, sband, ista,
> +				      priv_sta, changed);
> +}
>  
>  static inline void *rate_control_alloc_sta(struct rate_control_ref *ref,
>  					   struct ieee80211_sta *sta,

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

      reply	other threads:[~2009-02-12  9:18 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-02-12  6:08 [PATCH v2] mac80211: Extend the rate control API with an update callback Sujith
2009-02-12  9:17 ` Johannes Berg [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1234430248.16004.83.camel@johannes.local \
    --to=johannes@sipsolutions.net \
    --cc=Jouni.Malinen@Atheros.com \
    --cc=Sujith.Manoharan@atheros.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox