linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tony Vroon <tony@linx.net>
To: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Cc: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
	reinette chatre <reinette.chatre@intel.com>,
	"John W. Linville" <linville@tuxdriver.com>
Subject: Re: IWL5300, 2.6.29-rc4, CRDA 1.0.1: Missing out 802.11A frequency ranges
Date: Fri, 13 Feb 2009 10:55:26 +0000	[thread overview]
Message-ID: <1234522526.4331.1.camel@localhost> (raw)
In-Reply-To: <43e72e890902111346p4a689c9bvdb891eab388c5154@mail.gmail.com>


[-- Attachment #1.1: Type: text/plain, Size: 324 bytes --]

On Wed, 2009-02-11 at 13:46 -0800, Luis R. Rodriguez wrote:
> Looks good here -- can you please provide 'iw list' output prior to
> trying to associate.

As expected, the "world domain". Details attached.
Leaving the 802.11A spectrum alone won't help if your defaults don't
enable it.

>  Luis

Regards,
Tony V.

[-- Attachment #1.2: iwlist.earlyboot.txt --]
[-- Type: text/plain, Size: 2672 bytes --]

Wiphy phy0
	Band 1:
		HT capabilities: 0x087e
			 * 20/40 MHz operation
			 * SM PS disabled
			 * HT-greenfield
			 * 20 MHz short GI
			 * 40 MHz short GI
			 * max A-MSDU len 7935
		HT A-MPDU factor: 0x0003 (65535 bytes)
		HT A-MPDU density: 0x0005 (4 usec)
		HT MCS set: ff ff ff 00 01 00 00 00 00 00 c2 01 01 00 00 00
		Frequencies:
			* 2412 MHz [1] (15.0 dBm) (passive scanning, no IBSS)
			* 2417 MHz [2] (15.0 dBm) (passive scanning, no IBSS)
			* 2422 MHz [3] (15.0 dBm) (passive scanning, no IBSS)
			* 2427 MHz [4] (15.0 dBm) (passive scanning, no IBSS)
			* 2432 MHz [5] (15.0 dBm) (passive scanning, no IBSS)
			* 2437 MHz [6] (15.0 dBm) (passive scanning, no IBSS)
			* 2442 MHz [7] (15.0 dBm) (passive scanning, no IBSS)
			* 2447 MHz [8] (15.0 dBm) (passive scanning, no IBSS)
			* 2452 MHz [9] (15.0 dBm) (passive scanning, no IBSS)
			* 2457 MHz [10] (15.0 dBm) (passive scanning, no IBSS)
			* 2462 MHz [11] (15.0 dBm) (passive scanning, no IBSS)
			* 2467 MHz [12] (disabled)
			* 2472 MHz [13] (disabled)
		Bitrates:
			* 1.0 Mbps
			* 2.0 Mbps (short preamble supported)
			* 5.5 Mbps (short preamble supported)
			* 11.0 Mbps (short preamble supported)
			* 6.0 Mbps
			* 9.0 Mbps
			* 12.0 Mbps
			* 18.0 Mbps
			* 24.0 Mbps
			* 36.0 Mbps
			* 48.0 Mbps
			* 54.0 Mbps
			* 60.0 Mbps
	Band 2:
		HT capabilities: 0x087e
			 * 20/40 MHz operation
			 * SM PS disabled
			 * HT-greenfield
			 * 20 MHz short GI
			 * 40 MHz short GI
			 * max A-MSDU len 7935
		HT A-MPDU factor: 0x0003 (65535 bytes)
		HT A-MPDU density: 0x0005 (4 usec)
		HT MCS set: ff ff ff 00 01 00 00 00 00 00 c2 01 01 00 00 00
		Frequencies:
			* 5180 MHz [36] (disabled)
			* 5200 MHz [40] (disabled)
			* 5220 MHz [44] (disabled)
			* 5240 MHz [48] (disabled)
			* 5260 MHz [52] (disabled)
			* 5280 MHz [56] (disabled)
			* 5300 MHz [60] (disabled)
			* 5320 MHz [64] (disabled)
			* 5500 MHz [100] (disabled)
			* 5520 MHz [104] (disabled)
			* 5540 MHz [108] (disabled)
			* 5560 MHz [112] (disabled)
			* 5580 MHz [116] (disabled)
			* 5600 MHz [120] (disabled)
			* 5620 MHz [124] (disabled)
			* 5640 MHz [128] (disabled)
			* 5660 MHz [132] (disabled)
			* 5680 MHz [136] (disabled)
			* 5700 MHz [140] (disabled)
			* 5745 MHz [149] (disabled)
			* 5765 MHz [153] (disabled)
			* 5785 MHz [157] (disabled)
			* 5805 MHz [161] (disabled)
			* 5825 MHz [165] (disabled)
		Bitrates:
			* 6.0 Mbps
			* 9.0 Mbps
			* 12.0 Mbps
			* 18.0 Mbps
			* 24.0 Mbps
			* 36.0 Mbps
			* 48.0 Mbps
			* 54.0 Mbps
			* 60.0 Mbps
	Supported interface modes:
		 * IBSS
		 * Station
		 * Monitor

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

  reply	other threads:[~2009-02-13 10:56 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-02-09 18:09 IWL5300, 2.6.29-rc4, CRDA 1.0.1: Missing out 802.11A frequency ranges Tony Vroon
2009-02-09 18:20 ` Luis R. Rodriguez
2009-02-09 18:22   ` Luis R. Rodriguez
2009-02-09 18:23   ` Tony Vroon
2009-02-09 18:39     ` John W. Linville
2009-02-09 19:21       ` Tony Vroon
2009-02-09 19:35         ` Tony Vroon
2009-02-10  1:39           ` Luis R. Rodriguez
2009-02-10  1:51             ` Tony Vroon
2009-02-10  2:07               ` Luis R. Rodriguez
2009-02-11 19:19                 ` Tony Vroon
2009-02-11 21:46                   ` Luis R. Rodriguez
2009-02-13 10:55                     ` Tony Vroon [this message]
2009-02-14  4:52                   ` Luis R. Rodriguez
2009-02-14  5:02                     ` Luis R. Rodriguez
2009-02-16 12:08                     ` Tony Vroon
2009-02-16 15:47                       ` John W. Linville
2009-02-17 18:42                         ` Luis R. Rodriguez
2009-02-17 19:06                           ` Luis R. Rodriguez
2009-02-20  6:12                             ` Luis R. Rodriguez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1234522526.4331.1.camel@localhost \
    --to=tony@linx.net \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    --cc=lrodriguez@atheros.com \
    --cc=reinette.chatre@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).