From: Jiri Slaby <jirislaby@gmail.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, ath5k-devel@venema.h4ckr.net,
linux-kernel@vger.kernel.org, Jiri Slaby <jirislaby@gmail.com>,
Nick Kossifidis <mickflemm@gmail.com>,
"Luis R. Rodriguez" <lrodriguez@atheros.com>,
Bob Copeland <me@bobcopeland.com>
Subject: [PATCH 1/2] ath5k: constify stuff
Date: Sat, 7 Mar 2009 10:26:41 +0100 [thread overview]
Message-ID: <1236418002-2189-1-git-send-email-jirislaby@gmail.com> (raw)
Make some structures const to place them in .rodata, since we won't
change them.
Most important parts of objdump -h:
- 0 .text 00011170
+ 0 .text 00011140
- 5 .rodata 0000828e
+ 5 .rodata 0000895e
- 13 .data 00000560
+ 13 .data 00000110
- 14 .devinit.data 00000260
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Bob Copeland <me@bobcopeland.com>
---
drivers/net/wireless/ath5k/attach.c | 13 ++++++-------
drivers/net/wireless/ath5k/base.c | 8 ++++----
drivers/net/wireless/ath5k/debug.c | 10 +++++-----
drivers/net/wireless/ath5k/reset.c | 2 +-
4 files changed, 16 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/ath5k/attach.c b/drivers/net/wireless/ath5k/attach.c
index 05bc5cb..656cb9d 100644
--- a/drivers/net/wireless/ath5k/attach.c
+++ b/drivers/net/wireless/ath5k/attach.c
@@ -34,14 +34,14 @@
static int ath5k_hw_post(struct ath5k_hw *ah)
{
- int i, c;
- u16 cur_reg;
- u16 regs[2] = {AR5K_STA_ID0, AR5K_PHY(8)};
- u32 var_pattern;
- u32 static_pattern[4] = {
+ static const u32 static_pattern[4] = {
0x55555555, 0xaaaaaaaa,
0x66666666, 0x99999999
};
+ static const u16 regs[2] = { AR5K_STA_ID0, AR5K_PHY(8) };
+ int i, c;
+ u16 cur_reg;
+ u32 var_pattern;
u32 init_val;
u32 cur_val;
@@ -106,7 +106,6 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
{
struct ath5k_hw *ah;
struct pci_dev *pdev = sc->pdev;
- u8 mac[ETH_ALEN] = {};
int ret;
u32 srev;
@@ -312,7 +311,7 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
}
/* MAC address is cleared until add_interface */
- ath5k_hw_set_lladdr(ah, mac);
+ ath5k_hw_set_lladdr(ah, (u8[ETH_ALEN]){});
/* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */
memset(ah->ah_bssid, 0xff, ETH_ALEN);
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 08d691d..780fe6c 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -79,7 +79,7 @@ MODULE_VERSION("0.6.0 (EXPERIMENTAL)");
/* Known PCI ids */
-static struct pci_device_id ath5k_pci_id_table[] __devinitdata = {
+static const struct pci_device_id ath5k_pci_id_table[] = {
{ PCI_VDEVICE(ATHEROS, 0x0207), .driver_data = AR5K_AR5210 }, /* 5210 early */
{ PCI_VDEVICE(ATHEROS, 0x0007), .driver_data = AR5K_AR5210 }, /* 5210 */
{ PCI_VDEVICE(ATHEROS, 0x0011), .driver_data = AR5K_AR5211 }, /* 5311 - this is on AHB bus !*/
@@ -103,7 +103,7 @@ static struct pci_device_id ath5k_pci_id_table[] __devinitdata = {
MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
/* Known SREVs */
-static struct ath5k_srev_name srev_names[] = {
+static const struct ath5k_srev_name srev_names[] = {
{ "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 },
{ "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 },
{ "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A },
@@ -142,7 +142,7 @@ static struct ath5k_srev_name srev_names[] = {
{ "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN },
};
-static struct ieee80211_rate ath5k_rates[] = {
+static const struct ieee80211_rate ath5k_rates[] = {
{ .bitrate = 10,
.hw_value = ATH5K_RATE_CODE_1M, },
{ .bitrate = 20,
@@ -248,7 +248,7 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_bss_conf *bss_conf,
u32 changes);
-static struct ieee80211_ops ath5k_hw_ops = {
+static const struct ieee80211_ops ath5k_hw_ops = {
.tx = ath5k_tx,
.start = ath5k_start,
.stop = ath5k_stop,
diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c
index 413ed68..9770bb3 100644
--- a/drivers/net/wireless/ath5k/debug.c
+++ b/drivers/net/wireless/ath5k/debug.c
@@ -82,14 +82,14 @@ static int ath5k_debugfs_open(struct inode *inode, struct file *file)
/* debugfs: registers */
struct reg {
- char *name;
+ const char *name;
int addr;
};
#define REG_STRUCT_INIT(r) { #r, r }
/* just a few random registers, might want to add more */
-static struct reg regs[] = {
+static const struct reg regs[] = {
REG_STRUCT_INIT(AR5K_CR),
REG_STRUCT_INIT(AR5K_RXDP),
REG_STRUCT_INIT(AR5K_CFG),
@@ -142,7 +142,7 @@ static struct reg regs[] = {
static void *reg_start(struct seq_file *seq, loff_t *pos)
{
- return *pos < ARRAY_SIZE(regs) ? ®s[*pos] : NULL;
+ return *pos < ARRAY_SIZE(regs) ? (void *)®s[*pos] : NULL;
}
static void reg_stop(struct seq_file *seq, void *p)
@@ -153,7 +153,7 @@ static void reg_stop(struct seq_file *seq, void *p)
static void *reg_next(struct seq_file *seq, void *p, loff_t *pos)
{
++*pos;
- return *pos < ARRAY_SIZE(regs) ? ®s[*pos] : NULL;
+ return *pos < ARRAY_SIZE(regs) ? (void *)®s[*pos] : NULL;
}
static int reg_show(struct seq_file *seq, void *p)
@@ -290,7 +290,7 @@ static const struct file_operations fops_reset = {
/* debugfs: debug level */
-static struct {
+static const struct {
enum ath5k_debug_level level;
const char *name;
const char *desc;
diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c
index 1531ccd..685dc21 100644
--- a/drivers/net/wireless/ath5k/reset.c
+++ b/drivers/net/wireless/ath5k/reset.c
@@ -102,7 +102,7 @@ static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
* index into rates for control rates, we can set it up like this because
* this is only used for AR5212 and we know it supports G mode
*/
-static int control_rates[] =
+static const unsigned int control_rates[] =
{ 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 };
/**
--
1.6.1.3
next reply other threads:[~2009-03-07 9:27 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-07 9:26 Jiri Slaby [this message]
2009-03-07 9:26 ` [PATCH 2/2] ath5k: don't change mac in eeprom_read_mac on error Jiri Slaby
2009-03-07 12:06 ` [ath5k-devel] " Nick Kossifidis
2009-03-07 12:34 ` Bob Copeland
2009-03-07 12:03 ` [PATCH 1/2] ath5k: constify stuff Nick Kossifidis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1236418002-2189-1-git-send-email-jirislaby@gmail.com \
--to=jirislaby@gmail.com \
--cc=ath5k-devel@venema.h4ckr.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=lrodriguez@atheros.com \
--cc=me@bobcopeland.com \
--cc=mickflemm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).