linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Johannes Berg <johannes@sipsolutions.net>
To: Sujith <Sujith.Manoharan@atheros.com>
Cc: linville@tuxdriver.com, linux-wireless@vger.kernel.org,
	me@bobcopeland.com
Subject: Re: [PATCH v3] mac80211: Tear down aggregation sessions for suspend/resume
Date: Tue, 17 Mar 2009 08:46:59 +0100	[thread overview]
Message-ID: <1237276019.18086.7.camel@johannes.local> (raw)
In-Reply-To: <18879.5862.135522.858638@gargle.gargle.HOWL>

[-- Attachment #1: Type: text/plain, Size: 4482 bytes --]

On Tue, 2009-03-17 at 08:50 +0530, Sujith wrote:
> When the driver has been notified with a STA_REMOVE, it tears down
> the internal ADDBA state. On resume, trying to initiate aggregation would
> fail because mac80211 has not cleared the operational state for that <TID,STA>.
> This can be fixed by tearing down the existing sessions on a suspend.
> 
> Also, the driver can initiate a new BA session when suspend is in progress.
> This is fixed by marking the station as being in suspend state and
> denying ADDBA requests for such STAs.
> 
> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
> ---
> v2:
> ---
> * Deny ADDBA requests if suspend is in progress.
> 
> v3:
> ---
> * Use RCU protection when shutting down BA sessions for STAs.

Thanks for your patience :)

Acked-by: Johannes Berg <johannes@sipsolutions.net>

>  net/mac80211/agg-rx.c   |    8 ++++++++
>  net/mac80211/agg-tx.c   |    9 +++++++++
>  net/mac80211/pm.c       |   25 +++++++++++++++++++++++++
>  net/mac80211/sta_info.h |    3 +++
>  4 files changed, 45 insertions(+), 0 deletions(-)
> 
> diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
> index a95affc..07656d8 100644
> --- a/net/mac80211/agg-rx.c
> +++ b/net/mac80211/agg-rx.c
> @@ -197,6 +197,14 @@ void ieee80211_process_addba_request(struct ieee80211_local *local,
>  
>  	status = WLAN_STATUS_REQUEST_DECLINED;
>  
> +	if (test_sta_flags(sta, WLAN_STA_SUSPEND)) {
> +#ifdef CONFIG_MAC80211_HT_DEBUG
> +		printk(KERN_DEBUG "Suspend in progress. "
> +		       "Denying ADDBA request\n");
> +#endif
> +		goto end_no_lock;
> +	}
> +
>  	/* sanity check for incoming parameters:
>  	 * check if configuration can support the BA policy
>  	 * and if buffer size does not exceeds max value */
> diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
> index 1df116d..e5776ef 100644
> --- a/net/mac80211/agg-tx.c
> +++ b/net/mac80211/agg-tx.c
> @@ -257,6 +257,15 @@ int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid)
>  		goto unlock;
>  	}
>  
> +	if (test_sta_flags(sta, WLAN_STA_SUSPEND)) {
> +#ifdef CONFIG_MAC80211_HT_DEBUG
> +		printk(KERN_DEBUG "Suspend in progress. "
> +		       "Denying BA session request\n");
> +#endif
> +		ret = -EINVAL;
> +		goto unlock;
> +	}
> +
>  	spin_lock_bh(&sta->lock);
>  
>  	sdata = sta->sdata;
> diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
> index f845601..0273023 100644
> --- a/net/mac80211/pm.c
> +++ b/net/mac80211/pm.c
> @@ -21,6 +21,19 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
>  	list_for_each_entry(sdata, &local->interfaces, list)
>  		ieee80211_disable_keys(sdata);
>  
> +	/* Tear down aggregation sessions */
> +
> +	rcu_read_lock();
> +
> +	if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) {
> +		list_for_each_entry_rcu(sta, &local->sta_list, list) {
> +			set_sta_flags(sta, WLAN_STA_SUSPEND);
> +			ieee80211_sta_tear_down_BA_sessions(sta);
> +		}
> +	}
> +
> +	rcu_read_unlock();
> +
>  	/* remove STAs */
>  	if (local->ops->sta_notify) {
>  		spin_lock_irqsave(&local->sta_lock, flags);
> @@ -102,6 +115,18 @@ int __ieee80211_resume(struct ieee80211_hw *hw)
>  		spin_unlock_irqrestore(&local->sta_lock, flags);
>  	}
>  
> +	/* Clear Suspend state so that ADDBA requests can be processed */
> +
> +	rcu_read_lock();
> +
> +	if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) {
> +		list_for_each_entry_rcu(sta, &local->sta_list, list) {
> +			clear_sta_flags(sta, WLAN_STA_SUSPEND);
> +		}
> +	}
> +
> +	rcu_read_unlock();
> +
>  	/* add back keys */
>  	list_for_each_entry(sdata, &local->interfaces, list)
>  		if (netif_running(sdata->dev))
> diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
> index 1f45573..5b223b2 100644
> --- a/net/mac80211/sta_info.h
> +++ b/net/mac80211/sta_info.h
> @@ -35,6 +35,8 @@
>   *	IEEE80211_TX_CTL_CLEAR_PS_FILT control flag) when the next
>   *	frame to this station is transmitted.
>   * @WLAN_STA_MFP: Management frame protection is used with this STA.
> + * @WLAN_STA_SUSPEND: Set/cleared during a suspend/resume cycle.
> + *	Used to deny ADDBA requests (both TX and RX).
>   */
>  enum ieee80211_sta_info_flags {
>  	WLAN_STA_AUTH		= 1<<0,
> @@ -48,6 +50,7 @@ enum ieee80211_sta_info_flags {
>  	WLAN_STA_PSPOLL		= 1<<8,
>  	WLAN_STA_CLEAR_PS_FILT	= 1<<9,
>  	WLAN_STA_MFP		= 1<<10,
> +	WLAN_STA_SUSPEND	= 1<<11
>  };
>  
>  #define STA_TID_NUM 16

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

  reply	other threads:[~2009-03-17  7:47 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-17  3:20 [PATCH v3] mac80211: Tear down aggregation sessions for suspend/resume Sujith
2009-03-17  7:46 ` Johannes Berg [this message]
2009-03-19  0:44   ` Bob Copeland

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1237276019.18086.7.camel@johannes.local \
    --to=johannes@sipsolutions.net \
    --cc=Sujith.Manoharan@atheros.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    --cc=me@bobcopeland.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).