From: Zhu Yi <yi.zhu@intel.com>
To: "Luis R. Rodriguez" <mcgrof@gmail.com>
Cc: "linville@tuxdriver.com" <linville@tuxdriver.com>,
"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
"Ortiz, Samuel" <samuel.ortiz@intel.com>
Subject: Re: [PATCH 2/2] iwmc3200wifi: Add new Intel Wireless Multicomm 802.11 driver
Date: Thu, 21 May 2009 11:13:14 +0800 [thread overview]
Message-ID: <1242875594.24825.605.camel@debian> (raw)
In-Reply-To: <43e72e890905201954x7a5bc41etf0305b793cbc032e@mail.gmail.com>
On Thu, 2009-05-21 at 10:54 +0800, Luis R. Rodriguez wrote:
> CHAN2G() and CHAN5G() could use the second argument removed, its
> always 0.
Yeah, I saw mac80211_hwsim doing this, but not ath9k ;-)
> BTW does 'iw list' give you something back with all these channels?
Yes. And we refresh the channel flags according to EEPROM afterwards.
Below is a paste of the 'iw list' result here. BTW, I'm using the
default world regdom.
Thanks,
-yi
---
Wiphy phy1
Band 1:
Frequencies:
* 2412 MHz [1] (27.0 dBm)
* 2417 MHz [2] (27.0 dBm)
* 2422 MHz [3] (27.0 dBm)
* 2427 MHz [4] (27.0 dBm)
* 2432 MHz [5] (27.0 dBm)
* 2437 MHz [6] (27.0 dBm)
* 2442 MHz [7] (27.0 dBm)
* 2447 MHz [8] (27.0 dBm)
* 2452 MHz [9] (27.0 dBm)
* 2457 MHz [10] (27.0 dBm)
* 2462 MHz [11] (27.0 dBm)
* 2467 MHz [12] (disabled)
* 2472 MHz [13] (disabled)
* 2484 MHz [14] (disabled)
Bitrates:
* 1.0 Mbps
* 2.0 Mbps
* 5.5 Mbps
* 11.0 Mbps
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Band 2:
Frequencies:
* 5170 MHz [34] (disabled)
* 5180 MHz [36] (23.0 dBm) (no IBSS)
* 5190 MHz [38] (disabled)
* 5200 MHz [40] (23.0 dBm) (no IBSS)
* 5210 MHz [42] (disabled)
* 5220 MHz [44] (23.0 dBm) (no IBSS)
* 5230 MHz [46] (disabled)
* 5240 MHz [48] (23.0 dBm) (no IBSS)
* 5260 MHz [52] (23.0 dBm) (no IBSS)
* 5280 MHz [56] (23.0 dBm) (no IBSS)
* 5300 MHz [60] (23.0 dBm) (no IBSS)
* 5320 MHz [64] (23.0 dBm) (no IBSS)
* 5500 MHz [100] (disabled)
* 5520 MHz [104] (disabled)
* 5540 MHz [108] (disabled)
* 5560 MHz [112] (disabled)
* 5580 MHz [116] (disabled)
* 5600 MHz [120] (disabled)
* 5620 MHz [124] (disabled)
* 5640 MHz [128] (disabled)
* 5660 MHz [132] (disabled)
* 5680 MHz [136] (disabled)
* 5700 MHz [140] (disabled)
* 5745 MHz [149] (30.0 dBm) (no IBSS)
* 5765 MHz [153] (30.0 dBm) (no IBSS)
* 5785 MHz [157] (30.0 dBm) (no IBSS)
* 5805 MHz [161] (30.0 dBm) (no IBSS)
* 5825 MHz [165] (30.0 dBm) (no IBSS)
* 5920 MHz [184] (disabled)
* 5940 MHz [188] (disabled)
* 5960 MHz [192] (disabled)
* 5980 MHz [196] (disabled)
* 6000 MHz [200] (disabled)
* 6020 MHz [204] (disabled)
* 6040 MHz [208] (disabled)
* 6060 MHz [212] (disabled)
* 6080 MHz [216] (disabled)
Bitrates:
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
max # scan SSIDs: 10
Supported interface modes:
* IBSS
* Station
next prev parent reply other threads:[~2009-05-21 3:20 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-21 2:18 [Announce] Intel Wireless Multicomm 3200 WiFi driver Zhu Yi
2009-05-21 2:18 ` [PATCH 1/2] wireless: move some utility functions from mac80211 to cfg80211 Zhu Yi
2009-05-21 2:19 ` [PATCH 2/2] iwmc3200wifi: Add new Intel Wireless Multicomm 802.11 driver Zhu Yi
2009-05-21 2:54 ` Luis R. Rodriguez
2009-05-21 3:13 ` Zhu Yi [this message]
2009-05-21 7:12 ` [PATCH 1/2] wireless: move some utility functions from mac80211 to cfg80211 drago01
2009-05-21 7:09 ` Zhu Yi
2009-05-21 9:21 ` Johannes Berg
2009-05-21 13:38 ` John W. Linville
2009-05-21 13:56 ` Johannes Berg
2009-05-21 14:10 ` Gábor Stefanik
2009-05-21 14:41 ` John W. Linville
2009-05-21 14:54 ` Johannes Berg
2009-05-21 9:32 ` Johannes Berg
2009-05-21 11:53 ` Zhu, Yi
2009-05-21 16:10 ` [Announce] Intel Wireless Multicomm 3200 WiFi driver Johannes Berg
2009-05-21 17:54 ` Gábor Stefanik
2009-05-21 17:57 ` Johannes Berg
2009-05-21 18:23 ` Gábor Stefanik
2009-05-26 22:24 ` Luis R. Rodriguez
2009-05-31 2:17 ` Zhu Yi
2009-05-31 6:27 ` Luis R. Rodriguez
2009-05-31 6:42 ` Zhu Yi
2009-05-31 12:10 ` Maxim Levitsky
2009-05-31 12:20 ` Gábor Stefanik
2009-06-01 1:29 ` Zhu Yi
2009-06-01 22:52 ` Luis R. Rodriguez
2009-06-02 7:36 ` Zhu Yi
2009-06-01 23:00 ` Luis R. Rodriguez
2009-06-02 7:42 ` Zhu Yi
2009-06-02 16:53 ` Luis R. Rodriguez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1242875594.24825.605.camel@debian \
--to=yi.zhu@intel.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=mcgrof@gmail.com \
--cc=samuel.ortiz@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).