From: Javier Cardona <javier@cozybit.com>
To: linux-wireless@vger.kernel.org
Cc: johannes@sipsolutions.net, devel@lists.open80211s.org,
Javier Cardona <javier@cozybit.com>,
Andrey Yurovsky <andrey@cozybit.com>
Subject: [PATCH v4] Fix regression in mesh forwarding path.
Date: Tue, 7 Jul 2009 08:30:52 -0700 [thread overview]
Message-ID: <1246980652-4001-1-git-send-email-javier@cozybit.com> (raw)
In-Reply-To: <1246935252-19823-1-git-send-email-javier@cozybit.com>
The removal of the master netdev broke the mesh forwarding path. This patch
fixes it by using the new internal 'pending' queue.
As a result of this change, mesh forwarding no longer does the inefficient
802.11 -> 802.3 -> 802.11 conversion that was done before.
[Changes since v1]
Suggested by Johannes:
- Select queue before adding to mpath queue
- ieee80211_add_pending_skb -> ieee80211_add_pending_skbs
- Remove unnecessary header wme.h
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Andrey Yurovsky <andrey@cozybit.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
---
net/mac80211/mesh_hwmp.c | 3 ++-
net/mac80211/mesh_pathtbl.c | 8 +++-----
net/mac80211/rx.c | 17 +++++++++++++++--
net/mac80211/tx.c | 3 ---
4 files changed, 20 insertions(+), 11 deletions(-)
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index f49ef28..c31fe79 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -784,7 +784,6 @@ int mesh_nexthop_lookup(struct sk_buff *skb,
mesh_path_add(dst_addr, sdata);
mpath = mesh_path_lookup(dst_addr, sdata);
if (!mpath) {
- dev_kfree_skb(skb);
sdata->u.mesh.mshstats.dropped_frames_no_route++;
err = -ENOSPC;
goto endlookup;
@@ -804,6 +803,7 @@ int mesh_nexthop_lookup(struct sk_buff *skb,
memcpy(hdr->addr1, mpath->next_hop->sta.addr,
ETH_ALEN);
} else {
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (!(mpath->flags & MESH_PATH_RESOLVING)) {
/* Start discovery only if it is not running yet */
mesh_queue_preq(mpath, PREQ_Q_F_START);
@@ -815,6 +815,7 @@ int mesh_nexthop_lookup(struct sk_buff *skb,
skb_unlink(skb_to_free, &mpath->frame_queue);
}
+ info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
skb_queue_tail(&mpath->frame_queue, skb);
if (skb_to_free)
mesh_path_discard_frame(skb_to_free, sdata);
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 3c72557..8445dda 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -478,11 +478,9 @@ enddel:
*/
void mesh_path_tx_pending(struct mesh_path *mpath)
{
- struct sk_buff *skb;
-
- while ((skb = skb_dequeue(&mpath->frame_queue)) &&
- (mpath->flags & MESH_PATH_ACTIVE))
- dev_queue_xmit(skb);
+ if (mpath->flags & MESH_PATH_ACTIVE)
+ ieee80211_add_pending_skbs(mpath->sdata->local,
+ &mpath->frame_queue);
}
/**
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 91747be..1a22636 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1485,10 +1485,12 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
unsigned int hdrlen;
struct sk_buff *skb = rx->skb, *fwd_skb;
struct ieee80211_local *local = rx->local;
+ struct ieee80211_sub_if_data *sdata;
hdr = (struct ieee80211_hdr *) skb->data;
hdrlen = ieee80211_hdrlen(hdr->frame_control);
mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen);
+ sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev);
if (!ieee80211_is_data(hdr->frame_control))
return RX_CONTINUE;
@@ -1498,10 +1500,8 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
return RX_DROP_MONITOR;
if (mesh_hdr->flags & MESH_FLAGS_AE_A5_A6){
- struct ieee80211_sub_if_data *sdata;
struct mesh_path *mppath;
- sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev);
rcu_read_lock();
mppath = mpp_path_lookup(mesh_hdr->eaddr2, sdata);
if (!mppath) {
@@ -1547,6 +1547,19 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
fwd_skb->iif = rx->dev->ifindex;
ieee80211_select_queue(local, fwd_skb);
+ if (is_multicast_ether_addr(fwd_hdr->addr3))
+ memcpy(fwd_hdr->addr1, fwd_hdr->addr3,
+ ETH_ALEN);
+ else {
+ int err = mesh_nexthop_lookup(fwd_skb, sdata);
+ /* Failed to immediately resolve next hop:
+ * fwded frame was dropped or will be added
+ * later to the pending skb queue. */
+ if (err)
+ return RX_DROP_MONITOR;
+ }
+ IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
+ fwded_frames);
ieee80211_add_pending_skb(local, fwd_skb);
}
}
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 66d9a42..969a4b2 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1399,9 +1399,6 @@ static void ieee80211_xmit(struct ieee80211_sub_if_data *sdata,
dev_put(sdata->dev);
return;
}
- if (memcmp(sdata->dev->dev_addr, hdr->addr4, ETH_ALEN) != 0)
- IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
- fwded_frames);
} else if (unlikely(sdata->vif.type == NL80211_IFTYPE_MONITOR)) {
int hdrlen;
u16 len_rthdr;
--
1.5.4.3
next prev parent reply other threads:[~2009-07-07 15:39 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-07 0:47 [PATCH] Fix regression in mesh forwarding path javier
2009-07-07 0:52 ` javier
2009-07-07 1:06 ` Johannes Berg
2009-07-07 1:25 ` [PATCH v2] " javier
2009-07-07 1:40 ` Johannes Berg
2009-07-07 3:03 ` Javier Cardona
2009-07-07 2:54 ` [PATCH v3] " javier
2009-07-07 8:50 ` Johannes Berg
2009-07-07 15:30 ` Javier Cardona [this message]
2009-07-07 17:03 ` John W. Linville
2009-07-07 17:55 ` [PATCH v5] " javier
2009-07-10 18:51 ` [PATCH v5] mac80211: " John W. Linville
2009-07-10 19:04 ` Andrey Yurovsky
2009-07-07 1:35 ` [PATCH] " Javier Cardona
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1246980652-4001-1-git-send-email-javier@cozybit.com \
--to=javier@cozybit.com \
--cc=andrey@cozybit.com \
--cc=devel@lists.open80211s.org \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).