From: Johannes Berg <johannes@sipsolutions.net>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Subject: [PATCH] nl80211: report BSS status
Date: Fri, 10 Jul 2009 18:42:31 +0200 [thread overview]
Message-ID: <1247244151.29747.10.camel@johannes.local> (raw)
When connected to a BSS, or joined to an IBSS, we'll want
to know in userspace without using wireless extensions, so
report the BSS status in the BSS list. Userspace can query
the BSS list, display all the information and retrieve the
station information as well.
For example (from hwsim):
$ iw dev wlan1 scan dump
BSS 02:00:00:00:00:00 (on wlan1) -- associated
freq: 2462
beacon interval: 100
capability: ESS ShortSlotTime (0x0401)
signal: -50.00 dBm
SSID: j
Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0
DS Paramater set: channel 11
ERP: <no flags>
Extended supported rates: 24.0 36.0 48.0 54.0
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
---
include/linux/nl80211.h | 11 ++++++++
net/wireless/nl80211.c | 65 +++++++++++++++++++++++++++++++++++-------------
2 files changed, 59 insertions(+), 17 deletions(-)
--- wireless-testing.orig/include/linux/nl80211.h 2009-07-10 18:36:04.000000000 +0200
+++ wireless-testing/include/linux/nl80211.h 2009-07-10 18:36:28.000000000 +0200
@@ -1260,6 +1260,7 @@ enum nl80211_channel_type {
* in mBm (100 * dBm) (s32)
* @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
* in unspecified units, scaled to 0..100 (u8)
+ * @NL80211_BSS_STATUS: status, if this BSS is "used"
* @__NL80211_BSS_AFTER_LAST: internal
* @NL80211_BSS_MAX: highest BSS attribute
*/
@@ -1273,6 +1274,7 @@ enum nl80211_bss {
NL80211_BSS_INFORMATION_ELEMENTS,
NL80211_BSS_SIGNAL_MBM,
NL80211_BSS_SIGNAL_UNSPEC,
+ NL80211_BSS_STATUS,
/* keep last */
__NL80211_BSS_AFTER_LAST,
@@ -1280,6 +1282,15 @@ enum nl80211_bss {
};
/**
+ * enum nl80211_bss_status - BSS "status"
+ */
+enum nl80211_bss_status {
+ NL80211_BSS_STATUS_AUTHENTICATED,
+ NL80211_BSS_STATUS_ASSOCIATED,
+ NL80211_BSS_STATUS_IBSS_JOINED,
+};
+
+/**
* enum nl80211_auth_type - AuthenticationType
*
* @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
--- wireless-testing.orig/net/wireless/nl80211.c 2009-07-10 18:36:03.000000000 +0200
+++ wireless-testing/net/wireless/nl80211.c 2009-07-10 18:36:28.000000000 +0200
@@ -3093,11 +3093,15 @@ static int nl80211_trigger_scan(struct s
static int nl80211_send_bss(struct sk_buff *msg, u32 pid, u32 seq, int flags,
struct cfg80211_registered_device *rdev,
- struct net_device *dev,
- struct cfg80211_bss *res)
+ struct wireless_dev *wdev,
+ struct cfg80211_internal_bss *intbss)
{
+ struct cfg80211_bss *res = &intbss->pub;
void *hdr;
struct nlattr *bss;
+ int i;
+
+ ASSERT_WDEV_LOCK(wdev);
hdr = nl80211hdr_put(msg, pid, seq, flags,
NL80211_CMD_NEW_SCAN_RESULTS);
@@ -3106,7 +3110,7 @@ static int nl80211_send_bss(struct sk_bu
NLA_PUT_U32(msg, NL80211_ATTR_SCAN_GENERATION,
rdev->bss_generation);
- NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex);
+ NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, wdev->netdev->ifindex);
bss = nla_nest_start(msg, NL80211_ATTR_BSS);
if (!bss)
@@ -3135,6 +3139,28 @@ static int nl80211_send_bss(struct sk_bu
break;
}
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_STATION:
+ if (intbss == wdev->current_bss)
+ NLA_PUT_U32(msg, NL80211_BSS_STATUS,
+ NL80211_BSS_STATUS_ASSOCIATED);
+ else for (i = 0; i < MAX_AUTH_BSSES; i++) {
+ if (intbss != wdev->auth_bsses[i])
+ continue;
+ NLA_PUT_U32(msg, NL80211_BSS_STATUS,
+ NL80211_BSS_STATUS_AUTHENTICATED);
+ break;
+ }
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ if (intbss == wdev->current_bss)
+ NLA_PUT_U32(msg, NL80211_BSS_STATUS,
+ NL80211_BSS_STATUS_IBSS_JOINED);
+ break;
+ default:
+ break;
+ }
+
nla_nest_end(msg, bss);
return genlmsg_end(msg, hdr);
@@ -3147,9 +3173,10 @@ static int nl80211_send_bss(struct sk_bu
static int nl80211_dump_scan(struct sk_buff *skb,
struct netlink_callback *cb)
{
- struct cfg80211_registered_device *dev;
- struct net_device *netdev;
+ struct cfg80211_registered_device *rdev;
+ struct net_device *dev;
struct cfg80211_internal_bss *scan;
+ struct wireless_dev *wdev;
int ifidx = cb->args[0];
int start = cb->args[1], idx = 0;
int err;
@@ -3170,39 +3197,43 @@ static int nl80211_dump_scan(struct sk_b
cb->args[0] = ifidx;
}
- netdev = dev_get_by_index(&init_net, ifidx);
- if (!netdev)
+ dev = dev_get_by_index(&init_net, ifidx);
+ if (!dev)
return -ENODEV;
- dev = cfg80211_get_dev_from_ifindex(ifidx);
- if (IS_ERR(dev)) {
- err = PTR_ERR(dev);
+ rdev = cfg80211_get_dev_from_ifindex(ifidx);
+ if (IS_ERR(rdev)) {
+ err = PTR_ERR(rdev);
goto out_put_netdev;
}
- spin_lock_bh(&dev->bss_lock);
- cfg80211_bss_expire(dev);
+ wdev = dev->ieee80211_ptr;
+
+ wdev_lock(wdev);
+ spin_lock_bh(&rdev->bss_lock);
+ cfg80211_bss_expire(rdev);
- list_for_each_entry(scan, &dev->bss_list, list) {
+ list_for_each_entry(scan, &rdev->bss_list, list) {
if (++idx <= start)
continue;
if (nl80211_send_bss(skb,
NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
- dev, netdev, &scan->pub) < 0) {
+ rdev, wdev, scan) < 0) {
idx--;
goto out;
}
}
out:
- spin_unlock_bh(&dev->bss_lock);
+ spin_unlock_bh(&rdev->bss_lock);
+ wdev_unlock(wdev);
cb->args[1] = idx;
err = skb->len;
- cfg80211_unlock_rdev(dev);
+ cfg80211_unlock_rdev(rdev);
out_put_netdev:
- dev_put(netdev);
+ dev_put(dev);
return err;
}
reply other threads:[~2009-07-10 16:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1247244151.29747.10.camel@johannes.local \
--to=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox