From: Reinette Chatre <reinette.chatre@intel.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org,
ipw3945-devel@lists.sourceforge.net, Zhu Yi <yi.zhu@intel.com>,
Reinette Chatre <reinette.chatre@intel.com>
Subject: [PATCH 04/13] iwlwifi: cleanup HT40 extension channels setup
Date: Thu, 13 Aug 2009 13:30:53 -0700 [thread overview]
Message-ID: <1250195462-15811-5-git-send-email-reinette.chatre@intel.com> (raw)
In-Reply-To: <1250195462-15811-1-git-send-email-reinette.chatre@intel.com>
From: Zhu Yi <yi.zhu@intel.com>
The patch cleans up the HT40 extension channels setup for EEPROM
band 6 and 7 to make it more readable.
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-eeprom.c | 37 +++++++++-------------------
1 files changed, 12 insertions(+), 25 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 78c4a32..ded6332 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -484,14 +484,14 @@ static void iwl_init_band_reference(const struct iwl_priv *priv,
? # x " " : "")
/**
- * iwl_set_ht40_chan_info - Copy ht40 channel info into driver's priv.
+ * iwl_mod_ht40_chan_info - Copy ht40 channel info into driver's priv.
*
* Does not set up a command, or touch hardware.
*/
-static int iwl_set_ht40_chan_info(struct iwl_priv *priv,
+static int iwl_mod_ht40_chan_info(struct iwl_priv *priv,
enum ieee80211_band band, u16 channel,
const struct iwl_eeprom_channel *eeprom_ch,
- u8 ht40_extension_channel)
+ u8 clear_ht40_extension_channel)
{
struct iwl_channel_info *ch_info;
@@ -523,7 +523,7 @@ static int iwl_set_ht40_chan_info(struct iwl_priv *priv,
ch_info->ht40_min_power = 0;
ch_info->ht40_scan_power = eeprom_ch->max_power_avg;
ch_info->ht40_flags = eeprom_ch->flags;
- ch_info->ht40_extension_channel = ht40_extension_channel;
+ ch_info->ht40_extension_channel &= ~clear_ht40_extension_channel;
return 0;
}
@@ -592,8 +592,7 @@ int iwl_init_channel_map(struct iwl_priv *priv)
/* First write that ht40 is not enabled, and then enable
* one by one */
ch_info->ht40_extension_channel =
- (IEEE80211_CHAN_NO_HT40PLUS |
- IEEE80211_CHAN_NO_HT40MINUS);
+ IEEE80211_CHAN_NO_HT40;
if (!(is_channel_valid(ch_info))) {
IWL_DEBUG_INFO(priv, "Ch. %d Flags %x [%sGHz] - "
@@ -652,7 +651,6 @@ int iwl_init_channel_map(struct iwl_priv *priv)
/* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */
for (band = 6; band <= 7; band++) {
enum ieee80211_band ieeeband;
- u8 ht40_extension_chan;
iwl_init_band_reference(priv, band, &eeprom_ch_count,
&eeprom_ch_info, &eeprom_ch_index);
@@ -663,28 +661,17 @@ int iwl_init_channel_map(struct iwl_priv *priv)
/* Loop through each band adding each of the channels */
for (ch = 0; ch < eeprom_ch_count; ch++) {
-
- if ((band == 6) &&
- ((eeprom_ch_index[ch] == 5) ||
- (eeprom_ch_index[ch] == 6) ||
- (eeprom_ch_index[ch] == 7)))
- /* both are allowed: above and below */
- ht40_extension_chan = 0;
- else
- ht40_extension_chan =
- IEEE80211_CHAN_NO_HT40MINUS;
-
/* Set up driver's info for lower half */
- iwl_set_ht40_chan_info(priv, ieeeband,
+ iwl_mod_ht40_chan_info(priv, ieeeband,
eeprom_ch_index[ch],
- &(eeprom_ch_info[ch]),
- ht40_extension_chan);
+ &eeprom_ch_info[ch],
+ IEEE80211_CHAN_NO_HT40PLUS);
/* Set up driver's info for upper half */
- iwl_set_ht40_chan_info(priv, ieeeband,
- (eeprom_ch_index[ch] + 4),
- &(eeprom_ch_info[ch]),
- IEEE80211_CHAN_NO_HT40PLUS);
+ iwl_mod_ht40_chan_info(priv, ieeeband,
+ eeprom_ch_index[ch] + 4,
+ &eeprom_ch_info[ch],
+ IEEE80211_CHAN_NO_HT40MINUS);
}
}
--
1.5.6.3
next prev parent reply other threads:[~2009-08-13 20:31 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-13 20:30 [PATCH 0/13] iwlwifi driver updates 08/13/2009 Reinette Chatre
2009-08-13 20:30 ` [PATCH 01/13] iwlwifi: prevent read outside array bounds Reinette Chatre
2009-08-13 20:30 ` [PATCH 02/13] iwlwifi: remove unused HT configuration entry tx_chan_width Reinette Chatre
2009-08-13 20:30 ` [PATCH 03/13] iwlwifi: include HT configuration when adding stations through rs_rate_init Reinette Chatre
2009-08-13 20:30 ` Reinette Chatre [this message]
2009-08-13 20:30 ` [PATCH 05/13] iwlwifi: traverse linklist to find the valid OTP block Reinette Chatre
2009-08-13 20:30 ` [PATCH 06/13] iwlwifi: remove unused members of iwl_ht_info Reinette Chatre
2009-08-13 20:30 ` [PATCH 07/13] iwlwifi: refactor packet reception code Reinette Chatre
2009-08-13 20:30 ` [PATCH 08/13] iwlwifi: configure HT40 channels in iwl_mac_config Reinette Chatre
2009-08-13 20:30 ` [PATCH 09/13] iwlwifi: check short GI support per-station rather than globally Reinette Chatre
2009-08-13 20:30 ` [PATCH 10/13] iwlwifi: use station HT capabilities and BSS operating mode for Green-field Reinette Chatre
2009-08-13 20:31 ` [PATCH 11/13] iwlwifi: add thermal throttling support to 5150 Reinette Chatre
2009-08-13 20:31 ` [PATCH 12/13] iwlwifi: fix erroneous use of iwl_rx_packet.len as a length Reinette Chatre
2009-08-13 20:31 ` [PATCH 13/13] iwlwifi: disable PS by default Reinette Chatre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1250195462-15811-5-git-send-email-reinette.chatre@intel.com \
--to=reinette.chatre@intel.com \
--cc=ipw3945-devel@lists.sourceforge.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=yi.zhu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox