Linux wireless drivers development
 help / color / mirror / Atom feed
From: Vasanthakumar Thiagarajan <vasanth@atheros.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>, <Luis.Rodriguez@atheros.com>,
	<Jouni.Malinen@atheros.com>, <ath9k-devel@lists.ath9k.org>
Subject: [PATCH 5/8] ath9k: Determine btcoex scheme type based on chip version
Date: Wed, 26 Aug 2009 21:08:47 +0530	[thread overview]
Message-ID: <1251301130-10912-6-git-send-email-vasanth@atheros.com> (raw)
In-Reply-To: <1251301130-10912-5-git-send-email-vasanth@atheros.com>

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
---
 drivers/net/wireless/ath/ath9k/btcoex.h |    7 +++++++
 drivers/net/wireless/ath/ath9k/hw.c     |   12 ++++++++++--
 drivers/net/wireless/ath/ath9k/main.c   |    4 +++-
 3 files changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/btcoex.h b/drivers/net/wireless/ath/ath9k/btcoex.h
index c80492b..cdfa80d 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.h
+++ b/drivers/net/wireless/ath/ath9k/btcoex.h
@@ -20,7 +20,14 @@
 #define ATH_WLANACTIVE_GPIO	5
 #define ATH_BTACTIVE_GPIO	6
 
+enum ath_btcoex_scheme {
+	ATH_BTCOEX_CFG_NONE,
+	ATH_BTCOEX_CFG_2WIRE,
+	ATH_BTCOEX_CFG_3WIRE,
+};
+
 struct ath_btcoex_info {
+	enum ath_btcoex_scheme btcoex_scheme;
 	u8 wlanactive_gpio;
 	u8 btactive_gpio;
 };
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 3bb6abd..7b4bc8b 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -3489,6 +3489,7 @@ void ath9k_hw_fill_cap_info(struct ath_hw *ah)
 {
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
+	struct ath_btcoex_info *btcoex_info = &ah->ah_sc->btcoex_info;
 
 	u16 capField = 0, eeval;
 
@@ -3666,8 +3667,15 @@ void ath9k_hw_fill_cap_info(struct ath_hw *ah)
 
 	if (AR_SREV_9280_10_OR_LATER(ah) && btcoex_enable) {
 		pCap->hw_caps |= ATH9K_HW_CAP_BT_COEX;
-		ah->ah_sc->btcoex_info.btactive_gpio = ATH_BTACTIVE_GPIO;
-		ah->ah_sc->btcoex_info.wlanactive_gpio = ATH_WLANACTIVE_GPIO;
+		btcoex_info->btactive_gpio = ATH_BTACTIVE_GPIO;
+		btcoex_info->wlanactive_gpio = ATH_WLANACTIVE_GPIO;
+
+		if (AR_SREV_9285(ah))
+			btcoex_info->btcoex_scheme = ATH_BTCOEX_CFG_3WIRE;
+		else
+			btcoex_info->btcoex_scheme = ATH_BTCOEX_CFG_2WIRE;
+	} else {
+		btcoex_info->btcoex_scheme = ATH_BTCOEX_CFG_NONE;
 	}
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 878d3be..8a2f000 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1509,7 +1509,8 @@ static int ath_init_softc(u16 devid, struct ath_softc *sc)
 			ARRAY_SIZE(ath9k_5ghz_chantable);
 	}
 
-	if (ah->caps.hw_caps & ATH9K_HW_CAP_BT_COEX)
+	if ((ah->caps.hw_caps & ATH9K_HW_CAP_BT_COEX) &&
+	    (sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_2WIRE))
 		ath9k_hw_btcoex_init(ah);
 
 	return 0;
@@ -1993,6 +1994,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
 	ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
 
 	if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BT_COEX) &&
+	    (sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_2WIRE) &&
 	    !(sc->sc_flags & SC_OP_BTCOEX_ENABLED))
 		ath9k_hw_btcoex_enable(sc->sc_ah);
 
-- 
1.5.5.1


  reply	other threads:[~2009-08-26 15:47 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-26 15:38 [PATCH 0/8] ath9k: WLAN-BT coexistence clean up and 3-wire support Vasanthakumar Thiagarajan
2009-08-26 15:38 ` [PATCH 1/8] ath9k: Split ath9k_hw_btcoex_enable() into two logical pieces Vasanthakumar Thiagarajan
2009-08-26 15:38   ` [PATCH 2/8] ath9k: Move btcoex stuff from hw.[ch] to new btcoex.[ch] Vasanthakumar Thiagarajan
2009-08-26 15:38     ` [PATCH 3/8] ath9k: Configure btcoex register during every reset Vasanthakumar Thiagarajan
2009-08-26 15:38       ` [PATCH 4/8] ath9k: Move btcoex related data to a separate struct Vasanthakumar Thiagarajan
2009-08-26 15:38         ` Vasanthakumar Thiagarajan [this message]
2009-08-26 15:38           ` [PATCH 6/8] ath9k: Remove hw capability bit meant for btcoex Vasanthakumar Thiagarajan
2009-08-26 15:38             ` [PATCH 7/8] ath9k: Add infrastructure for generic hw timers Vasanthakumar Thiagarajan
2009-08-26 15:38               ` [PATCH 8/8] ath9k: Add Bluetooth Coexistence 3-wire support Vasanthakumar Thiagarajan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1251301130-10912-6-git-send-email-vasanth@atheros.com \
    --to=vasanth@atheros.com \
    --cc=Jouni.Malinen@atheros.com \
    --cc=Luis.Rodriguez@atheros.com \
    --cc=ath9k-devel@lists.ath9k.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox