* 802.11a multicast rate setting
@ 2009-09-03 3:38 Jinsung Lee
2009-09-03 17:46 ` Pavel Roskin
0 siblings, 1 reply; 2+ messages in thread
From: Jinsung Lee @ 2009-09-03 3:38 UTC (permalink / raw)
To: linux-wireless
Hi, everyone.
If using ath5k or ath9k when the WLAN card supports 802.11a mode, is it
possible to change multicast (or broadcast) rate into under 6Mbps, like the
case of 802.11b mode?
e.g. 1Mbps or 2Mbps.
Thank you and best regards,
----
Jinsung Lee
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: 802.11a multicast rate setting
2009-09-03 3:38 802.11a multicast rate setting Jinsung Lee
@ 2009-09-03 17:46 ` Pavel Roskin
0 siblings, 0 replies; 2+ messages in thread
From: Pavel Roskin @ 2009-09-03 17:46 UTC (permalink / raw)
To: Jinsung Lee; +Cc: linux-wireless
On Thu, 2009-09-03 at 12:38 +0900, Jinsung Lee wrote:
> Hi, everyone.
>
> If using ath5k or ath9k when the WLAN card supports 802.11a mode, is it
> possible to change multicast (or broadcast) rate into under 6Mbps, like the
> case of 802.11b mode?
> e.g. 1Mbps or 2Mbps.
No, such rates are not available for 802.11a.
--
Regards,
Pavel Roskin
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-09-03 17:46 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-09-03 3:38 802.11a multicast rate setting Jinsung Lee
2009-09-03 17:46 ` Pavel Roskin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).