From: Dan Williams <dcbw@redhat.com>
To: Holger Schurig <hs4233@mail.mn-solutions.de>
Cc: linux-wireless@vger.kernel.org, John W Linville <linville@tuxdriver.com>
Subject: Re: [PATCH] libertas: separate libertas' Kconfig in it's own file
Date: Tue, 06 Oct 2009 15:39:49 -0700 [thread overview]
Message-ID: <1254868789.8034.0.camel@localhost.localdomain> (raw)
In-Reply-To: <200910061631.20976.hs4233@mail.mn-solutions.de>
On Tue, 2009-10-06 at 16:31 +0200, Holger Schurig wrote:
> Also sorts all "source" lines in the wireless/Kconfig.
>
> Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Yeah, we've got a lot more options now.
Acked-by: Dan Williams <dcbw@redhat.com>
>
> Index: linux-wl/drivers/net/wireless/Kconfig
> ===================================================================
> --- linux-wl.orig/drivers/net/wireless/Kconfig 2009-10-06 07:55:26.000000000 +0200
> +++ linux-wl/drivers/net/wireless/Kconfig 2009-10-06 07:58:05.000000000 +0200
> @@ -139,47 +139,6 @@ config PCMCIA_RAYCS
> To compile this driver as a module, choose M here: the module will be
> called ray_cs. If unsure, say N.
>
> -config LIBERTAS
> - tristate "Marvell 8xxx Libertas WLAN driver support"
> - depends on WLAN_80211
> - select WIRELESS_EXT
> - select WEXT_SPY
> - select LIB80211
> - select FW_LOADER
> - ---help---
> - A library for Marvell Libertas 8xxx devices.
> -
> -config LIBERTAS_USB
> - tristate "Marvell Libertas 8388 USB 802.11b/g cards"
> - depends on LIBERTAS && USB
> - ---help---
> - A driver for Marvell Libertas 8388 USB devices.
> -
> -config LIBERTAS_CS
> - tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
> - depends on LIBERTAS && PCMCIA
> - select FW_LOADER
> - ---help---
> - A driver for Marvell Libertas 8385 CompactFlash devices.
> -
> -config LIBERTAS_SDIO
> - tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
> - depends on LIBERTAS && MMC
> - ---help---
> - A driver for Marvell Libertas 8385/8686/8688 SDIO devices.
> -
> -config LIBERTAS_SPI
> - tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
> - depends on LIBERTAS && SPI
> - ---help---
> - A driver for Marvell Libertas 8686 SPI devices.
> -
> -config LIBERTAS_DEBUG
> - bool "Enable full debugging output in the Libertas module."
> - depends on LIBERTAS
> - ---help---
> - Debugging support.
> -
> config LIBERTAS_THINFIRM
> tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
> depends on WLAN_80211 && MAC80211
> @@ -491,17 +450,18 @@ config MWL8K
> To compile this driver as a module, choose M here: the module
> will be called mwl8k. If unsure, say N.
>
> -source "drivers/net/wireless/p54/Kconfig"
> source "drivers/net/wireless/ath/Kconfig"
> -source "drivers/net/wireless/ipw2x00/Kconfig"
> -source "drivers/net/wireless/iwlwifi/Kconfig"
> -source "drivers/net/wireless/hostap/Kconfig"
> source "drivers/net/wireless/b43/Kconfig"
> source "drivers/net/wireless/b43legacy/Kconfig"
> -source "drivers/net/wireless/zd1211rw/Kconfig"
> -source "drivers/net/wireless/rt2x00/Kconfig"
> +source "drivers/net/wireless/hostap/Kconfig"
> +source "drivers/net/wireless/ipw2x00/Kconfig"
> +source "drivers/net/wireless/iwlwifi/Kconfig"
> +source "drivers/net/wireless/iwmc3200wifi/Kconfig"
> +source "drivers/net/wireless/libertas/Kconfig"
> source "drivers/net/wireless/orinoco/Kconfig"
> +source "drivers/net/wireless/p54/Kconfig"
> +source "drivers/net/wireless/rt2x00/Kconfig"
> source "drivers/net/wireless/wl12xx/Kconfig"
> -source "drivers/net/wireless/iwmc3200wifi/Kconfig"
> +source "drivers/net/wireless/zd1211rw/Kconfig"
>
> endif # WLAN
> Index: linux-wl/drivers/net/wireless/libertas/Makefile
> ===================================================================
> --- linux-wl.orig/drivers/net/wireless/libertas/Makefile 2009-10-06 07:55:26.000000000 +0200
> +++ linux-wl/drivers/net/wireless/libertas/Makefile 2009-10-06 07:58:25.000000000 +0200
> @@ -1,5 +1,15 @@
> -libertas-objs := main.o wext.o rx.o tx.o cmd.o cmdresp.o scan.o 11d.o \
> - debugfs.o persistcfg.o ethtool.o assoc.o
> +libertas-y += 11d.o
> +libertas-y += assoc.o
> +libertas-y += cmd.o
> +libertas-y += cmdresp.o
> +libertas-y += debugfs.o
> +libertas-y += ethtool.o
> +libertas-y += main.o
> +libertas-y += persistcfg.o
> +libertas-y += rx.o
> +libertas-y += scan.o
> +libertas-y += tx.o
> +libertas-y += wext.o
>
> usb8xxx-objs += if_usb.o
> libertas_cs-objs += if_cs.o
> Index: linux-wl/drivers/net/wireless/libertas/Kconfig
> ===================================================================
> --- /dev/null 1970-01-01 00:00:00.000000000 +0000
> +++ linux-wl/drivers/net/wireless/libertas/Kconfig 2009-10-06 07:58:15.000000000 +0200
> @@ -0,0 +1,40 @@
> +config LIBERTAS
> + tristate "Marvell 8xxx Libertas WLAN driver support"
> + depends on WLAN_80211
> + select WIRELESS_EXT
> + select WEXT_SPY
> + select LIB80211
> + select FW_LOADER
> + ---help---
> + A library for Marvell Libertas 8xxx devices.
> +
> +config LIBERTAS_USB
> + tristate "Marvell Libertas 8388 USB 802.11b/g cards"
> + depends on LIBERTAS && USB
> + ---help---
> + A driver for Marvell Libertas 8388 USB devices.
> +
> +config LIBERTAS_CS
> + tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
> + depends on LIBERTAS && PCMCIA
> + select FW_LOADER
> + ---help---
> + A driver for Marvell Libertas 8385 CompactFlash devices.
> +
> +config LIBERTAS_SDIO
> + tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
> + depends on LIBERTAS && MMC
> + ---help---
> + A driver for Marvell Libertas 8385/8686/8688 SDIO devices.
> +
> +config LIBERTAS_SPI
> + tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
> + depends on LIBERTAS && SPI
> + ---help---
> + A driver for Marvell Libertas 8686 SPI devices.
> +
> +config LIBERTAS_DEBUG
> + bool "Enable full debugging output in the Libertas module."
> + depends on LIBERTAS
> + ---help---
> + Debugging support.
>
next prev parent reply other threads:[~2009-10-06 22:40 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-06 14:31 [PATCH] libertas: separate libertas' Kconfig in it's own file Holger Schurig
2009-10-06 22:39 ` Dan Williams [this message]
2009-10-07 1:15 ` Andrey Yurovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1254868789.8034.0.camel@localhost.localdomain \
--to=dcbw@redhat.com \
--cc=hs4233@mail.mn-solutions.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).