From: Reinette Chatre <reinette.chatre@intel.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org,
ipw3945-devel@lists.sourceforge.net,
Wey-Yi Guy <wey-yi.w.guy@intel.com>,
Reinette Chatre <reinette.chatre@intel.com>
Subject: [PATCH 08/10] iwlwifi: set auto clock gate disable bit for 6x00/6x50 series
Date: Fri, 16 Oct 2009 14:25:56 -0700 [thread overview]
Message-ID: <1255728358-29976-9-git-send-email-reinette.chatre@intel.com> (raw)
In-Reply-To: <1255728358-29976-1-git-send-email-reinette.chatre@intel.com>
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
For 6x00 and 6x50 series NIC with OTP shadow RAM, set auto clock gate
disable bit when initializing OTP access.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-csr.h | 6 ++++--
drivers/net/wireless/iwlwifi/iwl-eeprom.c | 8 ++++++++
2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 401e1e0..b6ed5a3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -109,8 +109,9 @@
* Bit fields:
* 3-2: 0 = A, 1 = B, 2 = C, 3 = D step
*/
-#define CSR_HW_REV_WA_REG (CSR_BASE+0x22C)
-#define CSR_DBG_HPET_MEM_REG (CSR_BASE+0x240)
+#define CSR_HW_REV_WA_REG (CSR_BASE+0x22C)
+#define CSR_DBG_HPET_MEM_REG (CSR_BASE+0x240)
+#define CSR_DBG_LINK_PWR_MGMT_REG (CSR_BASE+0x250)
/* Bits for CSR_HW_IF_CONFIG_REG */
#define CSR49_HW_IF_CONFIG_REG_BIT_4965_R (0x00000010)
@@ -195,6 +196,7 @@
#define CSR_RESET_REG_FLAG_SW_RESET (0x00000080)
#define CSR_RESET_REG_FLAG_MASTER_DISABLED (0x00000100)
#define CSR_RESET_REG_FLAG_STOP_MASTER (0x00000200)
+#define CSR_RESET_LINK_PWR_MGMT_DISABLED (0x80000000)
/* GP (general purpose) CONTROL */
#define CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY (0x00000001)
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 2e8c405..9429cb1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -358,6 +358,14 @@ static int iwl_init_otp_access(struct iwl_priv *priv)
udelay(5);
iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG,
APMG_PS_CTRL_VAL_RESET_REQ);
+
+ /*
+ * CSR auto clock gate disable bit -
+ * this is only applicable for HW with OTP shadow RAM
+ */
+ if (priv->cfg->shadow_ram_support)
+ iwl_set_bit(priv, CSR_DBG_LINK_PWR_MGMT_REG,
+ CSR_RESET_LINK_PWR_MGMT_DISABLED);
}
return ret;
}
--
1.5.6.3
next prev parent reply other threads:[~2009-10-16 21:25 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-16 21:25 [PATCH 0/10] iwlwifi driver updates 10/16/2009 Reinette Chatre
2009-10-16 21:25 ` [PATCH 01/10] iwl3945: disable all tx fifos Reinette Chatre
2009-10-16 21:25 ` [PATCH 02/10] iwlwifi: show current power save status reported by uCode Reinette Chatre
2009-10-16 21:25 ` [PATCH 03/10] iwlwifi: identify eeprom version for 6x50 series NIC Reinette Chatre
2009-10-16 21:25 ` [PATCH 04/10] iwlwifi: fix incorrect otp blocks number for 6x50 series Reinette Chatre
2009-10-16 21:25 ` [PATCH 05/10] iwlwifi: move iwl_setup_mac to iwlagn Reinette Chatre
2009-10-16 21:25 ` [PATCH 06/10] iwlwifi: move rate scaling structures to header file Reinette Chatre
2009-10-16 21:25 ` [PATCH 07/10] iwlagn: store station rate scale information in mac80211 station structure Reinette Chatre
2009-10-16 21:25 ` Reinette Chatre [this message]
2009-10-16 21:25 ` [PATCH 09/10] iwlwifi: no chain noise support for 6x50 series Reinette Chatre
2009-10-16 21:25 ` [PATCH 10/10] iwlwifi: rework for static power save Reinette Chatre
2009-10-16 23:15 ` Tomas Winkler
2009-10-19 16:32 ` Guy, Wey-Yi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1255728358-29976-9-git-send-email-reinette.chatre@intel.com \
--to=reinette.chatre@intel.com \
--cc=ipw3945-devel@lists.sourceforge.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=wey-yi.w.guy@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox