From: Gertjan van Wingerde <gwingerde@gmail.com>
To: users@rt2x00.serialmonkey.com, linux-wireless@vger.kernel.org
Cc: Ivo van Doorn <ivdoorn@gmail.com>,
Gertjan van Wingerde <gwingerde@gmail.com>
Subject: [PATCH 5/6] rt2x00: Properly request tx headroom for alignment operations.
Date: Mon, 23 Nov 2009 08:16:04 +0100 [thread overview]
Message-ID: <1258960565-26736-6-git-send-email-gwingerde@gmail.com> (raw)
In-Reply-To: <1258960565-26736-5-git-send-email-gwingerde@gmail.com>
Current rt2x00 drivers may result in a "ieee80211_tx_status: headroom too
small" error message when a frame needs to be properly aligned before
transmitting it.
This is because the space needed to ensure proper alignment isn't
requested from mac80211.
Fix this by adding sufficient amount of alignment space to the amount
of headroom requested for TX frames.
Reported-by: David Ellingsworth <david@identd.dyndns.org>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Tested-by: David Ellingsworth <david@identd.dyndns.org>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 30 +++++++++++++++-------------
drivers/net/wireless/rt2x00/rt2500pci.c | 30 +++++++++++++++-------------
drivers/net/wireless/rt2x00/rt2500usb.c | 29 ++++++++++++++-------------
drivers/net/wireless/rt2x00/rt2800lib.c | 7 +----
drivers/net/wireless/rt2x00/rt2800pci.c | 31 +++++++++++++++--------------
drivers/net/wireless/rt2x00/rt2800usb.c | 25 ++++++++++++-----------
drivers/net/wireless/rt2x00/rt2x00.h | 7 ++++++
drivers/net/wireless/rt2x00/rt2x00queue.c | 6 ++--
drivers/net/wireless/rt2x00/rt61pci.c | 28 ++++++++++++++------------
drivers/net/wireless/rt2x00/rt73usb.c | 27 +++++++++++++------------
10 files changed, 117 insertions(+), 103 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 6e68bc7..f534d70 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1432,7 +1432,8 @@ static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK;
- rt2x00dev->hw->extra_tx_headroom = 0;
+ rt2x00dev->hw->extra_tx_headroom = rt2x00dev->ops->extra_tx_headroom +
+ RT2X00_ALIGN_SIZE;
SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
@@ -1623,20 +1624,21 @@ static const struct data_queue_desc rt2400pci_queue_atim = {
};
static const struct rt2x00_ops rt2400pci_ops = {
- .name = KBUILD_MODNAME,
- .max_sta_intf = 1,
- .max_ap_intf = 1,
- .eeprom_size = EEPROM_SIZE,
- .rf_size = RF_SIZE,
- .tx_queues = NUM_TX_QUEUES,
- .rx = &rt2400pci_queue_rx,
- .tx = &rt2400pci_queue_tx,
- .bcn = &rt2400pci_queue_bcn,
- .atim = &rt2400pci_queue_atim,
- .lib = &rt2400pci_rt2x00_ops,
- .hw = &rt2400pci_mac80211_ops,
+ .name = KBUILD_MODNAME,
+ .max_sta_intf = 1,
+ .max_ap_intf = 1,
+ .eeprom_size = EEPROM_SIZE,
+ .rf_size = RF_SIZE,
+ .tx_queues = NUM_TX_QUEUES,
+ .extra_tx_headroom = 0,
+ .rx = &rt2400pci_queue_rx,
+ .tx = &rt2400pci_queue_tx,
+ .bcn = &rt2400pci_queue_bcn,
+ .atim = &rt2400pci_queue_atim,
+ .lib = &rt2400pci_rt2x00_ops,
+ .hw = &rt2400pci_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
- .debugfs = &rt2400pci_rt2x00debug,
+ .debugfs = &rt2400pci_rt2x00debug,
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
};
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 9a31e5e..ae40947 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1733,7 +1733,8 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK;
- rt2x00dev->hw->extra_tx_headroom = 0;
+ rt2x00dev->hw->extra_tx_headroom = rt2x00dev->ops->extra_tx_headroom +
+ RT2X00_ALIGN_SIZE;
SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
@@ -1922,20 +1923,21 @@ static const struct data_queue_desc rt2500pci_queue_atim = {
};
static const struct rt2x00_ops rt2500pci_ops = {
- .name = KBUILD_MODNAME,
- .max_sta_intf = 1,
- .max_ap_intf = 1,
- .eeprom_size = EEPROM_SIZE,
- .rf_size = RF_SIZE,
- .tx_queues = NUM_TX_QUEUES,
- .rx = &rt2500pci_queue_rx,
- .tx = &rt2500pci_queue_tx,
- .bcn = &rt2500pci_queue_bcn,
- .atim = &rt2500pci_queue_atim,
- .lib = &rt2500pci_rt2x00_ops,
- .hw = &rt2500pci_mac80211_ops,
+ .name = KBUILD_MODNAME,
+ .max_sta_intf = 1,
+ .max_ap_intf = 1,
+ .eeprom_size = EEPROM_SIZE,
+ .rf_size = RF_SIZE,
+ .tx_queues = NUM_TX_QUEUES,
+ .extra_tx_headroom = 0,
+ .rx = &rt2500pci_queue_rx,
+ .tx = &rt2500pci_queue_tx,
+ .bcn = &rt2500pci_queue_bcn,
+ .atim = &rt2500pci_queue_atim,
+ .lib = &rt2500pci_rt2x00_ops,
+ .hw = &rt2500pci_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
- .debugfs = &rt2500pci_rt2x00debug,
+ .debugfs = &rt2500pci_rt2x00debug,
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
};
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index b2de43e..02b2e1c 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1656,7 +1656,7 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK;
- rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
+ rt2x00dev->hw->extra_tx_headroom = rt2x00dev->ops->extra_tx_headroom;
SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
@@ -1823,20 +1823,21 @@ static const struct data_queue_desc rt2500usb_queue_atim = {
};
static const struct rt2x00_ops rt2500usb_ops = {
- .name = KBUILD_MODNAME,
- .max_sta_intf = 1,
- .max_ap_intf = 1,
- .eeprom_size = EEPROM_SIZE,
- .rf_size = RF_SIZE,
- .tx_queues = NUM_TX_QUEUES,
- .rx = &rt2500usb_queue_rx,
- .tx = &rt2500usb_queue_tx,
- .bcn = &rt2500usb_queue_bcn,
- .atim = &rt2500usb_queue_atim,
- .lib = &rt2500usb_rt2x00_ops,
- .hw = &rt2500usb_mac80211_ops,
+ .name = KBUILD_MODNAME,
+ .max_sta_intf = 1,
+ .max_ap_intf = 1,
+ .eeprom_size = EEPROM_SIZE,
+ .rf_size = RF_SIZE,
+ .tx_queues = NUM_TX_QUEUES,
+ .extra_tx_headroom = TXD_DESC_SIZE,
+ .rx = &rt2500usb_queue_rx,
+ .tx = &rt2500usb_queue_tx,
+ .bcn = &rt2500usb_queue_bcn,
+ .atim = &rt2500usb_queue_atim,
+ .lib = &rt2500usb_rt2x00_ops,
+ .hw = &rt2500usb_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
- .debugfs = &rt2500usb_rt2x00debug,
+ .debugfs = &rt2500usb_rt2x00debug,
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
};
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index b809c49..de358b5 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2030,11 +2030,8 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK;
- if (rt2x00_intf_is_usb(rt2x00dev))
- rt2x00dev->hw->extra_tx_headroom =
- TXINFO_DESC_SIZE + TXWI_DESC_SIZE;
- else if (rt2x00_intf_is_pci(rt2x00dev))
- rt2x00dev->hw->extra_tx_headroom = TXWI_DESC_SIZE;
+ rt2x00dev->hw->extra_tx_headroom = rt2x00dev->ops->extra_tx_headroom +
+ RT2X00_L2PAD_SIZE;
SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 87a5094..dfc886f 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -652,7 +652,7 @@ static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
__le32 *txd = skbdesc->desc;
- __le32 *txwi = (__le32 *)(skb->data - rt2x00dev->hw->extra_tx_headroom);
+ __le32 *txwi = (__le32 *)(skb->data - rt2x00dev->ops->extra_tx_headroom);
u32 word;
/*
@@ -725,14 +725,14 @@ static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W1_BURST,
test_bit(ENTRY_TXD_BURST, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W1_SD_LEN0,
- rt2x00dev->hw->extra_tx_headroom);
+ rt2x00dev->ops->extra_tx_headroom);
rt2x00_set_field32(&word, TXD_W1_LAST_SEC0, 0);
rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 0);
rt2x00_desc_write(txd, 1, word);
rt2x00_desc_read(txd, 2, &word);
rt2x00_set_field32(&word, TXD_W2_SD_PTR1,
- skbdesc->skb_dma + rt2x00dev->hw->extra_tx_headroom);
+ skbdesc->skb_dma + rt2x00dev->ops->extra_tx_headroom);
rt2x00_desc_write(txd, 2, word);
rt2x00_desc_read(txd, 3, &word);
@@ -1201,19 +1201,20 @@ static const struct data_queue_desc rt2800pci_queue_bcn = {
};
static const struct rt2x00_ops rt2800pci_ops = {
- .name = KBUILD_MODNAME,
- .max_sta_intf = 1,
- .max_ap_intf = 8,
- .eeprom_size = EEPROM_SIZE,
- .rf_size = RF_SIZE,
- .tx_queues = NUM_TX_QUEUES,
- .rx = &rt2800pci_queue_rx,
- .tx = &rt2800pci_queue_tx,
- .bcn = &rt2800pci_queue_bcn,
- .lib = &rt2800pci_rt2x00_ops,
- .hw = &rt2800_mac80211_ops,
+ .name = KBUILD_MODNAME,
+ .max_sta_intf = 1,
+ .max_ap_intf = 8,
+ .eeprom_size = EEPROM_SIZE,
+ .rf_size = RF_SIZE,
+ .tx_queues = NUM_TX_QUEUES,
+ .extra_tx_headroom = TXWI_DESC_SIZE,
+ .rx = &rt2800pci_queue_rx,
+ .tx = &rt2800pci_queue_tx,
+ .bcn = &rt2800pci_queue_bcn,
+ .lib = &rt2800pci_rt2x00_ops,
+ .hw = &rt2800_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
- .debugfs = &rt2800_rt2x00debug,
+ .debugfs = &rt2800_rt2x00debug,
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
};
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 9ab15c4..af85d18 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -790,19 +790,20 @@ static const struct data_queue_desc rt2800usb_queue_bcn = {
};
static const struct rt2x00_ops rt2800usb_ops = {
- .name = KBUILD_MODNAME,
- .max_sta_intf = 1,
- .max_ap_intf = 8,
- .eeprom_size = EEPROM_SIZE,
- .rf_size = RF_SIZE,
- .tx_queues = NUM_TX_QUEUES,
- .rx = &rt2800usb_queue_rx,
- .tx = &rt2800usb_queue_tx,
- .bcn = &rt2800usb_queue_bcn,
- .lib = &rt2800usb_rt2x00_ops,
- .hw = &rt2800_mac80211_ops,
+ .name = KBUILD_MODNAME,
+ .max_sta_intf = 1,
+ .max_ap_intf = 8,
+ .eeprom_size = EEPROM_SIZE,
+ .rf_size = RF_SIZE,
+ .tx_queues = NUM_TX_QUEUES,
+ .extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
+ .rx = &rt2800usb_queue_rx,
+ .tx = &rt2800usb_queue_tx,
+ .bcn = &rt2800usb_queue_bcn,
+ .lib = &rt2800usb_rt2x00_ops,
+ .hw = &rt2800_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
- .debugfs = &rt2800_rt2x00debug,
+ .debugfs = &rt2800_rt2x00debug,
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
};
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 1cbb7ac..83008ab 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -113,6 +113,12 @@
( ((unsigned long)((__skb)->data + (__header))) & 3 )
/*
+ * Constants for extra TX headroom for alignment purposes.
+ */
+#define RT2X00_ALIGN_SIZE 4
+#define RT2X00_L2PAD_SIZE 8
+
+/*
* Standard timing and size defines.
* These values should follow the ieee80211 specifications.
*/
@@ -588,6 +594,7 @@ struct rt2x00_ops {
const unsigned int eeprom_size;
const unsigned int rf_size;
const unsigned int tx_queues;
+ const unsigned int extra_tx_headroom;
const struct data_queue_desc *rx;
const struct data_queue_desc *tx;
const struct data_queue_desc *bcn;
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 32d4aea..769a8a2 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -104,7 +104,7 @@ void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
* is also mapped to the DMA so it can be used for transfering
* additional descriptor information to the hardware.
*/
- skb_push(skb, rt2x00dev->hw->extra_tx_headroom);
+ skb_push(skb, rt2x00dev->ops->extra_tx_headroom);
skbdesc->skb_dma =
dma_map_single(rt2x00dev->dev, skb->data, skb->len, DMA_TO_DEVICE);
@@ -112,7 +112,7 @@ void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
/*
* Restore data pointer to original location again.
*/
- skb_pull(skb, rt2x00dev->hw->extra_tx_headroom);
+ skb_pull(skb, rt2x00dev->ops->extra_tx_headroom);
skbdesc->flags |= SKBDESC_DMA_MAPPED_TX;
}
@@ -134,7 +134,7 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
* by the driver, but it was actually mapped to DMA.
*/
dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma,
- skb->len + rt2x00dev->hw->extra_tx_headroom,
+ skb->len + rt2x00dev->ops->extra_tx_headroom,
DMA_TO_DEVICE);
skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX;
}
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index bf04605..956f6be 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2546,7 +2546,8 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK;
- rt2x00dev->hw->extra_tx_headroom = 0;
+ rt2x00dev->hw->extra_tx_headroom = rt2x00dev->ops->extra_tx_headroom +
+ RT2X00_ALIGN_SIZE;
SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
@@ -2788,19 +2789,20 @@ static const struct data_queue_desc rt61pci_queue_bcn = {
};
static const struct rt2x00_ops rt61pci_ops = {
- .name = KBUILD_MODNAME,
- .max_sta_intf = 1,
- .max_ap_intf = 4,
- .eeprom_size = EEPROM_SIZE,
- .rf_size = RF_SIZE,
- .tx_queues = NUM_TX_QUEUES,
- .rx = &rt61pci_queue_rx,
- .tx = &rt61pci_queue_tx,
- .bcn = &rt61pci_queue_bcn,
- .lib = &rt61pci_rt2x00_ops,
- .hw = &rt61pci_mac80211_ops,
+ .name = KBUILD_MODNAME,
+ .max_sta_intf = 1,
+ .max_ap_intf = 4,
+ .eeprom_size = EEPROM_SIZE,
+ .rf_size = RF_SIZE,
+ .tx_queues = NUM_TX_QUEUES,
+ .extra_tx_headroom = 0,
+ .rx = &rt61pci_queue_rx,
+ .tx = &rt61pci_queue_tx,
+ .bcn = &rt61pci_queue_bcn,
+ .lib = &rt61pci_rt2x00_ops,
+ .hw = &rt61pci_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
- .debugfs = &rt61pci_rt2x00debug,
+ .debugfs = &rt61pci_rt2x00debug,
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
};
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 5bbcf66..d4317dd 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2069,7 +2069,7 @@ static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK;
- rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
+ rt2x00dev->hw->extra_tx_headroom = rt2x00dev->ops->extra_tx_headroom;
SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
@@ -2306,19 +2306,20 @@ static const struct data_queue_desc rt73usb_queue_bcn = {
};
static const struct rt2x00_ops rt73usb_ops = {
- .name = KBUILD_MODNAME,
- .max_sta_intf = 1,
- .max_ap_intf = 4,
- .eeprom_size = EEPROM_SIZE,
- .rf_size = RF_SIZE,
- .tx_queues = NUM_TX_QUEUES,
- .rx = &rt73usb_queue_rx,
- .tx = &rt73usb_queue_tx,
- .bcn = &rt73usb_queue_bcn,
- .lib = &rt73usb_rt2x00_ops,
- .hw = &rt73usb_mac80211_ops,
+ .name = KBUILD_MODNAME,
+ .max_sta_intf = 1,
+ .max_ap_intf = 4,
+ .eeprom_size = EEPROM_SIZE,
+ .rf_size = RF_SIZE,
+ .tx_queues = NUM_TX_QUEUES,
+ .extra_tx_headroom = TXD_DESC_SIZE,
+ .rx = &rt73usb_queue_rx,
+ .tx = &rt73usb_queue_tx,
+ .bcn = &rt73usb_queue_bcn,
+ .lib = &rt73usb_rt2x00_ops,
+ .hw = &rt73usb_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
- .debugfs = &rt73usb_rt2x00debug,
+ .debugfs = &rt73usb_rt2x00debug,
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
};
--
1.6.5.3
next prev parent reply other threads:[~2009-11-23 7:16 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-23 7:15 [PATCH 0/6] Assorted fixes and cleanups for rt2x00 and mac80211 Gertjan van Wingerde
2009-11-23 7:16 ` [PATCH 1/6] rt2x00: Only initialize HT on rt2800 devices that support it Gertjan van Wingerde
2009-11-23 7:16 ` [PATCH 2/6] rt2x00: Remove unused variable frame_control from rt2x00mac_tx Gertjan van Wingerde
2009-11-23 7:16 ` [PATCH 3/6] rt2x00: Clean up use of rt2x00_intf_is_pci Gertjan van Wingerde
2009-11-23 7:16 ` [PATCH 4/6] rt2x00: Fix typo (lengt --> length) in rt2x00queue.c Gertjan van Wingerde
2009-11-23 7:16 ` Gertjan van Wingerde [this message]
2009-11-23 7:16 ` [PATCH 6/6] mac80211: Allow extra TX headroom to be consumed by drivers Gertjan van Wingerde
2009-11-23 10:41 ` Johannes Berg
2009-11-23 19:26 ` Gertjan van Wingerde
2009-11-23 7:35 ` [PATCH 5/6] rt2x00: Properly request tx headroom for alignment operations Julian Calaby
2009-11-23 19:18 ` Gertjan van Wingerde
2009-11-23 10:38 ` Johannes Berg
2009-11-23 19:25 ` Gertjan van Wingerde
2009-11-23 18:33 ` Ivo van Doorn
2009-11-23 20:51 ` Gertjan van Wingerde
2009-11-23 18:29 ` [PATCH 4/6] rt2x00: Fix typo (lengt --> length) in rt2x00queue.c Ivo van Doorn
2009-11-23 18:13 ` [PATCH 3/6] rt2x00: Clean up use of rt2x00_intf_is_pci Ivo van Doorn
2009-11-23 18:12 ` [PATCH 2/6] rt2x00: Remove unused variable frame_control from rt2x00mac_tx Ivo van Doorn
2009-11-23 9:58 ` [PATCH 1/6] rt2x00: Only initialize HT on rt2800 devices that support it Simon Raffeiner
2009-11-23 19:20 ` Gertjan van Wingerde
2009-11-23 18:12 ` Ivo van Doorn
2009-11-23 19:30 ` Gertjan van Wingerde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1258960565-26736-6-git-send-email-gwingerde@gmail.com \
--to=gwingerde@gmail.com \
--cc=ivdoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=users@rt2x00.serialmonkey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).