From: "Rafał Miłecki" <zajec5@gmail.com>
To: linux-wireless@vger.kernel.org,
"John W. Linville" <linville@tuxdriver.com>
Cc: bcm43xx-dev@lists.berlios.de, "Rafał Miłecki" <zajec5@gmail.com>
Subject: [PATCH 3/4] b43: update cordic code to match current specs
Date: Mon, 25 Jan 2010 19:00:00 +0100 [thread overview]
Message-ID: <1264442401-6364-4-git-send-email-zajec5@gmail.com> (raw)
In-Reply-To: <1264442401-6364-1-git-send-email-zajec5@gmail.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
---
drivers/net/wireless/b43/phy_common.c | 19 +++++++++++++------
drivers/net/wireless/b43/phy_common.h | 4 ++++
drivers/net/wireless/b43/phy_lp.c | 7 ++++---
3 files changed, 21 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index 348a78f..868b829 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -422,21 +422,28 @@ void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on)
b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
}
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/Cordic */
b43_c32 b43_cordic(int theta)
{
u32 arctg[] = { 2949120, 1740967, 919879, 466945, 234379, 117304,
58666, 29335, 14668, 7334, 3667, 1833, 917, 458,
229, 115, 57, 29, };
- int i, tmp, signx = 1, angle = 0;
+ u8 i;
+ s32 tmp;
+ s8 signx = 1;
+ u32 angle = 0;
b43_c32 ret = { .i = 39797, .q = 0, };
- theta = clamp_t(int, theta, -180, 180);
+ while (theta > (180 << 16))
+ theta -= (360 << 16);
+ while (theta < -(180 << 16))
+ theta += (360 << 16);
- if (theta > 90) {
- theta -= 180;
+ if (theta > (90 << 16)) {
+ theta -= (180 << 16);
signx = -1;
- } else if (theta < -90) {
- theta += 180;
+ } else if (theta < -(90 << 16)) {
+ theta += (180 << 16);
signx = -1;
}
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
index 7a38226..0716f07 100644
--- a/drivers/net/wireless/b43/phy_common.h
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -8,6 +8,10 @@ struct b43_wldev;
/* Complex number using 2 32-bit signed integers */
typedef struct { s32 i, q; } b43_c32;
+#define CORDIC_CONVERT(value) (((value) >= 0) ? \
+ ((((value) >> 15) + 1) >> 1) : \
+ -((((-(value)) >> 15) + 1) >> 1))
+
/* PHY register routing bits */
#define B43_PHYROUTE 0x0C00 /* PHY register routing bits mask */
#define B43_PHYROUTE_BASE 0x0000 /* Base registers */
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index a142804..e770aad 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -1784,7 +1784,8 @@ static void lpphy_start_tx_tone(struct b43_wldev *dev, s32 freq, u16 max)
{
struct b43_phy_lp *lpphy = dev->phy.lp;
u16 buf[64];
- int i, samples = 0, angle = 0, rotation = (9 * freq) / 500;
+ int i, samples = 0, angle = 0;
+ int rotation = (((36 * freq) / 20) << 16) / 100;
b43_c32 sample;
lpphy->tx_tone_freq = freq;
@@ -1803,8 +1804,8 @@ static void lpphy_start_tx_tone(struct b43_wldev *dev, s32 freq, u16 max)
for (i = 0; i < samples; i++) {
sample = b43_cordic(angle);
angle += rotation;
- buf[i] = ((sample.i * max) & 0xFF) << 8;
- buf[i] |= (sample.q * max) & 0xFF;
+ buf[i] = CORDIC_CONVERT((sample.i * max) & 0xFF) << 8;
+ buf[i] |= CORDIC_CONVERT((sample.q * max) & 0xFF);
}
b43_lptab_write_bulk(dev, B43_LPTAB16(5, 0), samples, buf);
--
1.6.4.2
next prev parent reply other threads:[~2010-01-25 18:00 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-25 17:59 [PATCH 0/4] more N-PHY, cordic stuff Rafał Miłecki
2010-01-25 17:59 ` [PATCH 1/4] b43: N-PHY: fix one bit off in parsing RF Ctrl Override arguments Rafał Miłecki
2010-01-25 17:59 ` [PATCH 2/4] b43: make cordic common (LP-PHY and N-PHY need it) Rafał Miłecki
2010-01-25 18:32 ` Michael Buesch
2010-01-25 18:35 ` Rafał Miłecki
2010-01-25 18:36 ` Rafał Miłecki
2010-01-25 18:53 ` Michael Buesch
2010-01-25 22:19 ` John W. Linville
2010-01-25 23:17 ` Rafał Miłecki
2010-01-25 18:00 ` Rafał Miłecki [this message]
2010-01-25 18:00 ` [PATCH 4/4] b43: N-PHY: use cordic to generate samples Rafał Miłecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1264442401-6364-4-git-send-email-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=bcm43xx-dev@lists.berlios.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).