From: "Rafał Miłecki" <zajec5@gmail.com>
To: linux-wireless@vger.kernel.org,
"John W. Linville" <linville@tuxdriver.com>
Cc: bcm43xx-dev@lists.berlios.de, "Rafał Miłecki" <zajec5@gmail.com>
Subject: [PATCH 01/11] b43: N-PHY: add some registers and structs definitions
Date: Tue, 9 Feb 2010 21:04:33 +0100 [thread overview]
Message-ID: <1265745883-3392-2-git-send-email-zajec5@gmail.com> (raw)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/b43.h | 1 +
drivers/net/wireless/b43/phy_n.h | 9 +++++++++
drivers/net/wireless/b43/tables_nphy.h | 9 +++++++++
3 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 6a6ab0f..bd7c505 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -104,6 +104,7 @@
#define B43_MMIO_MACFILTER_CONTROL 0x420
#define B43_MMIO_MACFILTER_DATA 0x422
#define B43_MMIO_RCMTA_COUNT 0x43C
+#define B43_MMIO_PSM_PHY_HDR 0x492 /* programmable state machine */
#define B43_MMIO_RADIO_HWENABLED_LO 0x49A
#define B43_MMIO_GPIO_CONTROL 0x49C
#define B43_MMIO_GPIO_MASK 0x49E
diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index 403aad3..47d20dc 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -711,6 +711,8 @@
#define B43_NPHY_PAPD_EN1 B43_PHY_N(0x29B) /* PAPD Enable1 TBD */
#define B43_NPHY_EPS_TABLE_ADJ1 B43_PHY_N(0x29C) /* EPS Table Adj1 TBD */
+#define B43_PHY_B_BBCFG B43_PHY_N_BMODE(0x001) /* BB config */
+#define B43_PHY_B_TEST B43_PHY_N_BMODE(0x00A)
/* Broadcom 2055 radio registers */
@@ -924,6 +926,13 @@
struct b43_wldev;
+struct b43_chanspec {
+ u8 channel;
+ u8 sideband;
+ u8 b_width;
+ u8 b_freq;
+};
+
struct b43_phy_n_iq_comp {
s16 a0;
s16 b0;
diff --git a/drivers/net/wireless/b43/tables_nphy.h b/drivers/net/wireless/b43/tables_nphy.h
index 9c1c6ec..b23036f 100644
--- a/drivers/net/wireless/b43/tables_nphy.h
+++ b/drivers/net/wireless/b43/tables_nphy.h
@@ -4,6 +4,15 @@
#include <linux/types.h>
+struct b43_phy_n_sfo_cfg {
+ u16 phy_bw1a;
+ u16 phy_bw2;
+ u16 phy_bw3;
+ u16 phy_bw4;
+ u16 phy_bw5;
+ u16 phy_bw6;
+};
+
struct b43_nphy_channeltab_entry {
/* The channel number */
u8 channel;
--
1.6.4.2
next reply other threads:[~2010-02-09 20:04 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-09 20:04 Rafał Miłecki [this message]
2010-02-09 20:04 ` [PATCH 02/11] b43: N-PHY: initialize super switch Rafał Miłecki
2010-02-09 20:04 ` [PATCH 03/11] b43: N-PHY: turn radio on/off (rfkill) Rafał Miłecki
2010-02-09 20:04 ` [PATCH 04/11] b43: N-PHY: update writing channel-specific radio registers Rafał Miłecki
2010-02-09 20:04 ` [PATCH 05/11] b43: N-PHY: update post init of 2055 radio Rafał Miłecki
2010-02-09 20:04 ` [PATCH 06/11] b43: N-PHY: switch to chanspec struct Rafał Miłecki
2010-02-09 20:04 ` [PATCH 07/11] b43: N-PHY: adjust gain table Rafał Miłecki
2010-02-09 20:04 ` [PATCH 08/11] b43: implement writing to MMIO shared memory Rafał Miłecki
2010-02-09 22:59 ` Michael Buesch
2010-02-27 11:09 ` Rafał Miłecki
2010-02-27 14:50 ` Michael Buesch
2010-02-09 20:04 ` [PATCH 09/11] b43: N-PHY: isloate 2055 radio setup Rafał Miłecki
2010-02-09 23:01 ` Michael Buesch
2010-02-09 20:04 ` [PATCH 10/11] b43: N-PHY: implement chanspec setup Rafał Miłecki
2010-02-09 20:04 ` [PATCH 11/11] b43: N-PHY: switch to chanspec ops Rafał Miłecki
2010-02-09 20:23 ` Larry Finger
2010-02-09 23:02 ` [PATCH 01/11] b43: N-PHY: add some registers and structs definitions Michael Buesch
2010-02-15 19:30 ` John W. Linville
2010-02-19 16:12 ` Rafał Miłecki
2010-02-27 11:12 ` Rafał Miłecki
2010-02-27 14:51 ` Michael Buesch
2010-02-28 1:37 ` Rafał Miłecki
2010-02-28 11:46 ` Michael Buesch
2010-02-19 14:54 ` Johannes Berg
2010-02-19 15:49 ` Larry Finger
2010-02-19 16:23 ` Johannes Berg
2010-02-19 16:40 ` Larry Finger
2010-02-19 17:02 ` Johannes Berg
2010-02-19 17:06 ` Gábor Stefanik
2010-02-19 17:09 ` Johannes Berg
2010-02-19 18:21 ` Gábor Stefanik
2010-02-19 18:24 ` Johannes Berg
2010-02-19 18:33 ` Gábor Stefanik
2010-02-19 18:41 ` Johannes Berg
2010-02-19 18:10 ` Larry Finger
2010-02-19 18:19 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1265745883-3392-2-git-send-email-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=bcm43xx-dev@lists.berlios.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).