From: "Rafał Miłecki" <zajec5@gmail.com>
To: linux-wireless@vger.kernel.org,
"John W. Linville" <linville@tuxdriver.com>
Cc: bcm43xx-dev@lists.berlios.de, "Rafał Miłecki" <zajec5@gmail.com>
Subject: [PATCH 02/11] b43: N-PHY: initialize super switch
Date: Tue, 9 Feb 2010 21:04:34 +0100 [thread overview]
Message-ID: <1265745883-3392-3-git-send-email-zajec5@gmail.com> (raw)
In-Reply-To: <1265745883-3392-2-git-send-email-zajec5@gmail.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/phy_n.c | 37 ++++++++++++++++++++++++++++++++++++-
1 files changed, 36 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 795bb1e..2d8eda1 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -646,6 +646,41 @@ static void b43_nphy_read_clip_detection(struct b43_wldev *dev, u16 *clip_st)
clip_st[1] = b43_phy_read(dev, B43_NPHY_C2_CLIP1THRES);
}
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/SuperSwitchInit */
+static void b43_nphy_superswitch_init(struct b43_wldev *dev, bool init)
+{
+ if (dev->phy.rev >= 3) {
+ if (!init)
+ return;
+ if (0 /* FIXME */) {
+ b43_ntab_write(dev, B43_NTAB16(9, 2), 0x211);
+ b43_ntab_write(dev, B43_NTAB16(9, 3), 0x222);
+ b43_ntab_write(dev, B43_NTAB16(9, 8), 0x144);
+ b43_ntab_write(dev, B43_NTAB16(9, 12), 0x188);
+ }
+ } else {
+ b43_phy_write(dev, B43_NPHY_GPIO_LOOEN, 0);
+ b43_phy_write(dev, B43_NPHY_GPIO_HIOEN, 0);
+
+ ssb_chipco_gpio_control(&dev->dev->bus->chipco, 0xFC00,
+ 0xFC00);
+ b43_write32(dev, B43_MMIO_MACCTL,
+ b43_read32(dev, B43_MMIO_MACCTL) &
+ ~B43_MACCTL_GPOUTSMSK);
+ b43_write16(dev, B43_MMIO_GPIO_MASK,
+ b43_read16(dev, B43_MMIO_GPIO_MASK) | 0xFC00);
+ b43_write16(dev, B43_MMIO_GPIO_CONTROL,
+ b43_read16(dev, B43_MMIO_GPIO_CONTROL) & ~0xFC00);
+
+ if (init) {
+ b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO1, 0x2D8);
+ b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP1, 0x301);
+ b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO2, 0x2D8);
+ b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP2, 0x301);
+ }
+ }
+}
+
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/classifier */
static u16 b43_nphy_classifier(struct b43_wldev *dev, u16 mask, u16 val)
{
@@ -3116,7 +3151,7 @@ int b43_phy_initn(struct b43_wldev *dev)
target = b43_nphy_get_tx_gains(dev);
if (nphy->antsel_type == 2)
- ;/*TODO NPHY Superswitch Init with argument 1*/
+ b43_nphy_superswitch_init(dev, true);
if (nphy->perical != 2) {
b43_nphy_rssi_cal(dev);
if (phy->rev >= 3) {
--
1.6.4.2
next prev parent reply other threads:[~2010-02-09 20:04 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-09 20:04 [PATCH 01/11] b43: N-PHY: add some registers and structs definitions Rafał Miłecki
2010-02-09 20:04 ` Rafał Miłecki [this message]
2010-02-09 20:04 ` [PATCH 03/11] b43: N-PHY: turn radio on/off (rfkill) Rafał Miłecki
2010-02-09 20:04 ` [PATCH 04/11] b43: N-PHY: update writing channel-specific radio registers Rafał Miłecki
2010-02-09 20:04 ` [PATCH 05/11] b43: N-PHY: update post init of 2055 radio Rafał Miłecki
2010-02-09 20:04 ` [PATCH 06/11] b43: N-PHY: switch to chanspec struct Rafał Miłecki
2010-02-09 20:04 ` [PATCH 07/11] b43: N-PHY: adjust gain table Rafał Miłecki
2010-02-09 20:04 ` [PATCH 08/11] b43: implement writing to MMIO shared memory Rafał Miłecki
2010-02-09 22:59 ` Michael Buesch
2010-02-27 11:09 ` Rafał Miłecki
2010-02-27 14:50 ` Michael Buesch
2010-02-09 20:04 ` [PATCH 09/11] b43: N-PHY: isloate 2055 radio setup Rafał Miłecki
2010-02-09 23:01 ` Michael Buesch
2010-02-09 20:04 ` [PATCH 10/11] b43: N-PHY: implement chanspec setup Rafał Miłecki
2010-02-09 20:04 ` [PATCH 11/11] b43: N-PHY: switch to chanspec ops Rafał Miłecki
2010-02-09 20:23 ` Larry Finger
2010-02-09 23:02 ` [PATCH 01/11] b43: N-PHY: add some registers and structs definitions Michael Buesch
2010-02-15 19:30 ` John W. Linville
2010-02-19 16:12 ` Rafał Miłecki
2010-02-27 11:12 ` Rafał Miłecki
2010-02-27 14:51 ` Michael Buesch
2010-02-28 1:37 ` Rafał Miłecki
2010-02-28 11:46 ` Michael Buesch
2010-02-19 14:54 ` Johannes Berg
2010-02-19 15:49 ` Larry Finger
2010-02-19 16:23 ` Johannes Berg
2010-02-19 16:40 ` Larry Finger
2010-02-19 17:02 ` Johannes Berg
2010-02-19 17:06 ` Gábor Stefanik
2010-02-19 17:09 ` Johannes Berg
2010-02-19 18:21 ` Gábor Stefanik
2010-02-19 18:24 ` Johannes Berg
2010-02-19 18:33 ` Gábor Stefanik
2010-02-19 18:41 ` Johannes Berg
2010-02-19 18:10 ` Larry Finger
2010-02-19 18:19 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1265745883-3392-3-git-send-email-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=bcm43xx-dev@lists.berlios.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).