* Re: iwlagn driver is no longer able to manage Intel 5100 AGN wireless controller
[not found] <20100305155155.3578.80301.reportbug@celtic.nixsys.be>
@ 2010-03-07 3:26 ` Ben Hutchings
2010-03-07 23:19 ` Ben Hutchings
0 siblings, 1 reply; 2+ messages in thread
From: Ben Hutchings @ 2010-03-07 3:26 UTC (permalink / raw)
To: linux-wireless; +Cc: Wouter Verhelst, 572664
[-- Attachment #1: Type: text/plain, Size: 31441 bytes --]
On Fri, 2010-03-05 at 16:51 +0100, Wouter Verhelst wrote:
> Package: linux-2.6
> Version: 2.6.32-8
> Severity: important
>
> Hi,
>
> Since about a month or so, I can not bring my wireless network interface
> up anymore. At first I thought it was a hardware issue, but that's not
> the case; under "that other" OS, everything seems to work fine.
>
> When I try to bring it up, the following ensues:
>
> wouter@celtic:~$ sudo ip link set wlan0 up
> RTNETLINK answers: Unknown error 132
>
> Ben Hutchings told me on IRC that error 132 meant ERFKILL, i.e., that
> the RF kill button would be engaged. But that is not the case; and
> toggling it does not seem to change anything.
Is this a known bug? Otherwise, can anyone help Wouter to debug it?
> -- Package-specific info:
> ** Version:
> Linux version 2.6.32-2-amd64 (Debian 2.6.32-8) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Fri Feb 12 00:01:47 UTC 2010
>
> ** Command line:
> BOOT_IMAGE=/boot/vmlinuz-2.6.32-2-amd64 root=UUID=acdf54ed-d8be-4533-a9c6-5a66d77fb0e3 ro vdso32=2
>
> ** Tainted: W (512)
> * Taint on warning.
This warning is due to a broken DMAR table and seems unrelated.
More system information follows.
Ben.
> ** Kernel log:
> [ 8.248978] sd 6:0:0:0: [sdb] Assuming drive cache: write through
> [ 8.251400] sd 6:0:0:0: [sdb] Assuming drive cache: write through
> [ 8.252409] sdb: sdb1
> [ 8.255402] sd 6:0:0:0: [sdb] Assuming drive cache: write through
> [ 8.256461] sd 6:0:0:0: [sdb] Attached SCSI disk
> [ 8.464124] Linux video capture interface: v2.00
> [ 8.545487] ACPI: AC Adapter [AC] (on-line)
> [ 8.852235] ACPI: SSDT 000000007bac6c18 002B7 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
> [ 8.853838] ACPI: SSDT 000000007bac4618 0057B (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
> [ 8.858536] Monitor-Mwait will be used to enter C-1 state
> [ 8.858564] Monitor-Mwait will be used to enter C-2 state
> [ 8.858570] Marking TSC unstable due to TSC halts in idle
> [ 8.859636] processor LNXCPU:00: registered as cooling_device6
> [ 8.861214] ACPI: SSDT 000000007bac5e18 001D7 (v01 PmRef ApIst 00003000 INTL 20060912)
> [ 8.862545] Switching to clocksource hpet
> [ 8.863694] ACPI: SSDT 000000007bac6f18 0008D (v01 PmRef ApCst 00003000 INTL 20060912)
> [ 8.866500] processor LNXCPU:01: registered as cooling_device7
> [ 8.904445] ACPI: Battery Slot [BAT0] (battery present)
> [ 9.080309] cfg80211: Using static regulatory domain info
> [ 9.081312] cfg80211: Regulatory domain: US
> [ 9.082259] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> [ 9.083262] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
> [ 9.084285] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
> [ 9.085372] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
> [ 9.086352] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
> [ 9.087261] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
> [ 9.088166] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
> [ 9.089043] cfg80211: Calling CRDA for country: US
> [ 9.159804] Bluetooth: Core ver 2.15
> [ 9.160782] NET: Registered protocol family 31
> [ 9.161599] Bluetooth: HCI device and connection manager initialized
> [ 9.162410] Bluetooth: HCI socket layer initialized
> [ 9.356233] Bluetooth: Generic Bluetooth USB driver ver 0.6
> [ 9.357374] usbcore: registered new interface driver btusb
> [ 9.464483] lis3lv02d: laptop model unknown, using default axes configuration
> [ 9.466170] lis3lv02d: 1-byte sensor found
> [ 9.477747] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9
> [ 9.479205] Registered led device: hp::hddprotect
> [ 9.480122] lis3lv02d driver loaded.
> [ 9.591647] input: PC Speaker as /devices/platform/pcspkr/input/input10
> [ 9.614761] uvcvideo: Found UVC 1.00 device CKF7063 (04f2:b083)
> [ 9.631983] input: CKF7063 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input11
> [ 9.632961] usbcore: registered new interface driver uvcvideo
> [ 9.633851] USB Video Class driver (v0.1.0)
> [ 9.774652] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
> [ 9.775616] iwlagn: Copyright(c) 2003-2009 Intel Corporation
> [ 9.776624] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 9.777503] iwlagn 0000:02:00.0: setting latency timer to 64
> [ 9.777562] iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
> [ 9.815302] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
> [ 9.816242] alloc irq_desc for 32 on node -1
> [ 9.816244] alloc kstat_irqs on node -1
> [ 9.816265] iwlagn 0000:02:00.0: irq 32 for MSI/MSI-X
> [ 9.943396] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000
> [ 9.985362] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
> [ 10.010689] phy0: Selected rate control algorithm 'iwl-agn-rs'
> [ 10.672084] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
> [ 10.673018] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 10.673962] HDA Intel 0000:00:1b.0: setting latency timer to 64
> [ 11.168127] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13
> [ 12.438161] Adding 1951888k swap on /dev/sda5. Priority:-1 extents:1 across:1951888k
> [ 12.874317] loop: module loaded
> [ 15.643484] fuse init (API version 7.13)
> [ 48.664225] sky2 eth0: enabling interface
> [ 48.666870] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 48.680067] sky2 eth0: disabling interface
> [ 49.708388] RPC: Registered udp transport module.
> [ 49.710602] RPC: Registered tcp transport module.
> [ 49.712875] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 49.920186] Slow work thread pool: Starting up
> [ 49.922553] Slow work thread pool: Ready
> [ 49.924908] FS-Cache: Loaded
> [ 50.029731] FS-Cache: Netfs 'nfs' registered for caching
> [ 50.115338] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> [ 62.042747] Bluetooth: L2CAP ver 2.14
> [ 62.044869] Bluetooth: L2CAP socket layer initialized
> [ 62.137809] Bluetooth: RFCOMM TTY layer initialized
> [ 62.139905] Bluetooth: RFCOMM socket layer initialized
> [ 62.141955] Bluetooth: RFCOMM ver 1.11
> [ 62.202480] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 62.204482] Bluetooth: BNEP filters: protocol multicast
> [ 62.302460] Bridge firewalling registered
> [ 62.465648] Bluetooth: SCO (Voice Link) ver 0.6
> [ 62.466703] Bluetooth: SCO socket layer initialized
> [ 66.077873] lp: driver loaded but no devices found
> [ 66.108962] ppdev: user-space parallel port driver
> [ 77.978500] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
> [ 3862.425305] [drm] DAC-6: set mode 24
> [ 3900.820867] sky2 eth0: enabling interface
> [ 3900.821646] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 3903.271227] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
> [ 3903.271994] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 3913.980155] eth0: no IPv6 routers present
> [ 3979.691106] tun: Universal TUN/TAP device driver, 1.6
> [ 3979.691116] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> [ 3979.692807] tun0: Disabled Privacy Extensions
> [ 4681.017531] sky2 eth0: Link is down.
> [ 4698.540258] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
> [ 4715.933118] sky2 eth0: Link is down.
> [ 4718.224969] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
>
> ** Model information
> sys_vendor: Hewlett-Packard
> product_name: HP Compaq 2230s (FU312EA)
> product_version: F.08
> chassis_vendor: Hewlett-Packard
> chassis_version:
> bios_vendor: Hewlett-Packard
> bios_version: 68PHU Ver. F.08
> board_vendor: Hewlett-Packard
> board_name: 3037
> board_version: KBC Version 11.17
>
> ** Loaded modules:
> Module Size Used by
> tun 10828 2
> uinput 6376 1
> ppdev 5030 0
> lp 7478 0
> parport 27938 2 ppdev,lp
> sco 7193 2
> bridge 39582 0
> stp 1440 1 bridge
> bnep 9395 2
> rfcomm 29501 5
> l2cap 24656 16 bnep,rfcomm
> binfmt_misc 6431 1
> nfsd 253670 3
> exportfs 3170 1 nfsd
> nfs 239956 0
> lockd 57523 2 nfsd,nfs
> fscache 29802 1 nfs
> nfs_acl 2031 2 nfsd,nfs
> auth_rpcgss 33476 2 nfsd,nfs
> sunrpc 161073 6 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
> autofs4 20773 0
> acpi_cpufreq 5555 0
> cpufreq_userspace 1992 0
> cpufreq_powersave 902 0
> cpufreq_stats 2659 0
> cpufreq_conservative 5162 0
> fuse 50078 3
> dm_crypt 10507 0
> md_mod 73616 0
> loop 11767 0
> snd_hda_codec_intelhdmi 10695 1
> snd_hda_codec_analog 64530 1
> snd_hda_intel 19411 0
> snd_hda_codec 54212 3 snd_hda_codec_intelhdmi,snd_hda_codec_analog,snd_hda_intel
> snd_hwdep 5364 1 snd_hda_codec
> snd_pcm_oss 32591 0
> snd_mixer_oss 12606 1 snd_pcm_oss
> snd_pcm 60615 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
> snd_seq_midi 4400 0
> snd_rawmidi 15483 1 snd_seq_midi
> snd_seq_midi_event 4628 1 snd_seq_midi
> snd_seq 42801 3 snd_seq_midi,snd_seq_midi_event
> snd_timer 15502 2 snd_pcm,snd_seq
> snd_seq_device 4477 3 snd_seq_midi,snd_rawmidi,snd_seq
> arc4 1274 2
> snd 46350 13 snd_hda_codec_intelhdmi,snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
> ecb 1841 2
> iwlagn 71772 0
> joydev 8411 0
> soundcore 4598 1 snd
> uvcvideo 51663 0
> pcspkr 1699 0
> iwlcore 77830 1 iwlagn
> hp_accel 11056 0
> lis3lv02d 5109 1 hp_accel
> snd_page_alloc 6217 2 snd_hda_intel,snd_pcm
> input_polldev 1967 1 lis3lv02d
> btusb 9785 2
> mac80211 136124 2 iwlagn,iwlcore
> psmouse 49505 0
> led_class 2401 2 iwlcore,hp_accel
> bluetooth 41795 9 sco,bnep,rfcomm,l2cap,btusb
> evdev 7336 28
> cfg80211 101269 3 iwlagn,iwlcore,mac80211
> battery 4998 0
> processor 29495 3 acpi_cpufreq
> rfkill 12996 3 bluetooth,cfg80211
> serio_raw 3752 0
> ac 2192 0
> container 2389 0
> videodev 29977 1 uvcvideo
> v4l1_compat 11442 2 uvcvideo,videodev
> v4l2_compat_ioctl32 8538 1 videodev
> wmi 4307 0
> ext4 285035 1
> mbcache 4970 1 ext4
> jbd2 66855 1 ext4
> crc16 1319 2 l2cap,ext4
> dm_mod 53690 9 dm_crypt
> sg 18728 0
> sr_mod 12602 0
> cdrom 29399 1 sr_mod
> sd_mod 29673 6
> crc_t10dif 1276 1 sd_mod
> usbhid 33116 0
> hid 62825 1 usbhid
> usb_storage 38521 1
> uhci_hcd 18489 0
> ahci 31686 3
> libata 132167 1 ahci
> sky2 39390 0
> scsi_mod 121893 5 sg,sr_mod,sd_mod,usb_storage,libata
> ehci_hcd 30674 0
> usbcore 121751 7 uvcvideo,btusb,usbhid,usb_storage,uhci_hcd,ehci_hcd
> nls_base 6377 1 usbcore
> thermal 11674 0
> fan 3346 0
> nbd 7985 0
> i915 247194 2
> drm_kms_helper 18883 1 i915
> i2c_algo_bit 4225 1 i915
> button 4634 1 i915
> video 17445 1 i915
> thermal_sys 11878 4 processor,thermal,fan,video
> output 1692 1 video
> drm 137174 3 i915,drm_kms_helper
> i2c_core 15584 4 videodev,i915,i2c_algo_bit,drm
> intel_agp 25593 1
>
> ** PCI devices:
> 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
> Subsystem: Hewlett-Packard Company Device [103c:3037]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: <access denied>
> Kernel driver in use: agpgart-intel
>
> 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
> Subsystem: Hewlett-Packard Company Device [103c:3037]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 29
> Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=4M]
> Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
> Region 4: I/O ports at 70f0 [size=8]
> Expansion ROM at <unassigned> [disabled]
> Capabilities: <access denied>
> Kernel driver in use: i915
>
> 00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
> Subsystem: Hewlett-Packard Company Device [103c:3037]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Region 0: Memory at 90400000 (64-bit, non-prefetchable) [size=1M]
> Capabilities: <access denied>
>
> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
> Subsystem: Hewlett-Packard Company Device [103c:3037]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 16
> Region 4: I/O ports at 70c0 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
> Subsystem: Hewlett-Packard Company Device [103c:3037]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 17
> Region 4: I/O ports at 70a0 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
> Subsystem: Hewlett-Packard Company Device [103c:3037]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin C routed to IRQ 18
> Region 4: I/O ports at 7080 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
> Subsystem: Hewlett-Packard Company Device [103c:3037]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin D routed to IRQ 19
> Region 0: Memory at 98904c00 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
> Kernel driver in use: ehci_hcd
>
> 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
> Subsystem: Hewlett-Packard Company Device [103c:3037]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 17
> Region 0: Memory at 98900000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
> Kernel driver in use: HDA Intel
>
> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 00008000-00008fff
> Memory behind bridge: 98800000-988fffff
> Prefetchable memory behind bridge: 0000000098a00000-0000000098bfffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 00009000-00009fff
> Memory behind bridge: 98700000-987fffff
> Prefetchable memory behind bridge: 0000000098c00000-0000000098dfffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=03, subordinate=43, sec-latency=0
> I/O behind bridge: 00005000-00006fff
> Memory behind bridge: 94700000-986fffff
> Prefetchable memory behind bridge: 0000000098e00000-0000000098ffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=44, subordinate=84, sec-latency=0
> I/O behind bridge: 00003000-00004fff
> Memory behind bridge: 90700000-946fffff
> Prefetchable memory behind bridge: 0000000099000000-00000000991fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=85, subordinate=85, sec-latency=0
> I/O behind bridge: 00002000-00002fff
> Memory behind bridge: 90600000-906fffff
> Prefetchable memory behind bridge: 0000000099200000-00000000993fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
> Subsystem: Hewlett-Packard Company Device [103c:3037]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 20
> Region 4: I/O ports at 7060 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
> Subsystem: Hewlett-Packard Company Device [103c:3037]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 22
> Region 4: I/O ports at 7040 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
> Subsystem: Hewlett-Packard Company Device [103c:3037]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin C routed to IRQ 18
> Region 4: I/O ports at 7020 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
> Subsystem: Hewlett-Packard Company Device [103c:3037]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin D routed to IRQ 20
> Region 0: Memory at 98904800 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
> Kernel driver in use: ehci_hcd
>
> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=86, subordinate=86, sec-latency=32
> Memory behind bridge: 90500000-905fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
>
> 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
> Subsystem: Hewlett-Packard Company Device [103c:3037]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: <access denied>
>
> 00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
> Subsystem: Hewlett-Packard Company Device [103c:3037]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 31
> Region 0: I/O ports at 70e8 [size=8]
> Region 1: I/O ports at 70fc [size=4]
> Region 2: I/O ports at 70e0 [size=8]
> Region 3: I/O ports at 70f8 [size=4]
> Region 4: I/O ports at 7000 [size=32]
> Region 5: Memory at 98904000 (32-bit, non-prefetchable) [size=2K]
> Capabilities: <access denied>
> Kernel driver in use: ahci
>
> 02:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237]
> Subsystem: Intel Corporation PRO/Wireless 5100AGN Network Connection [8086:1211]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 32
> Region 0: Memory at 98700000 (64-bit, non-prefetchable) [size=8K]
> Capabilities: <access denied>
> Kernel driver in use: iwlagn
>
> 85:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. Device [11ab:436c] (rev 10)
> Subsystem: Hewlett-Packard Company Device [103c:3037]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 30
> Region 0: Memory at 90600000 (64-bit, non-prefetchable) [size=16K]
> Region 2: I/O ports at 2000 [size=256]
> Expansion ROM at 99200000 [disabled] [size=128K]
> Capabilities: <access denied>
> Kernel driver in use: sky2
>
>
> ** USB devices:
> Bus 003 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 006 Device 003: ID 04d9:0420 Holtek Semiconductor, Inc.
> Bus 006 Device 002: ID 046d:c316 Logitech, Inc. HID-Compliant Keyboard
> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 003: ID 04f2:b083 Chicony Electronics Co., Ltd
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 004: ID 04e8:5f05 Samsung Electronics Co., Ltd
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
>
> -- System Information:
> Debian Release: squeeze/sid
> APT prefers unstable
> APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
> Architecture: amd64 (x86_64)
>
> Kernel: Linux 2.6.32-2-amd64 (SMP w/2 CPU cores)
> Locale: LANG=nl_BE.UTF-8, LC_CTYPE=nl_BE.UTF-8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/bash
>
> Versions of packages linux-image-2.6.32-2-amd64 depends on:
> ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
> ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
> ii module-init-tools 3.12~pre1-1 tools for managing Linux kernel mo
>
> Versions of packages linux-image-2.6.32-2-amd64 recommends:
> ii firmware-linux-free 2.6.32-9 Binary firmware for various driver
>
> Versions of packages linux-image-2.6.32-2-amd64 suggests:
> pn grub | lilo <none> (no description available)
> pn linux-doc-2.6.32 <none> (no description available)
>
> Versions of packages linux-image-2.6.32-2-amd64 is related to:
> pn firmware-bnx2 <none> (no description available)
> pn firmware-bnx2x <none> (no description available)
> pn firmware-ipw2x00 <none> (no description available)
> pn firmware-ivtv <none> (no description available)
> ii firmware-iwlwifi 0.23 Binary firmware for Intel Wireless
> ii firmware-linux 0.23 Binary firmware for various driver
> ii firmware-linux-nonfree 0.23 Binary firmware for various driver
> pn firmware-qlogic <none> (no description available)
> pn firmware-ralink <none> (no description available)
>
> -- debconf information:
> linux-image-2.6.32-2-amd64/postinst/depmod-error-initrd-2.6.32-2-amd64: false
> linux-image-2.6.32-2-amd64/prerm/removing-running-kernel-2.6.32-2-amd64: true
> linux-image-2.6.32-2-amd64/postinst/bootloader-error-2.6.32-2-amd64:
> shared/kernel-image/really-run-bootloader: true
> linux-image-2.6.32-2-amd64/postinst/missing-firmware-2.6.32-2-amd64:
> linux-image-2.6.32-2-amd64/prerm/would-invalidate-boot-loader-2.6.32-2-amd64: true
> linux-image-2.6.32-2-amd64/postinst/bootloader-test-error-2.6.32-2-amd64:
>
>
>
--
Ben Hutchings
Q. Which is the greater problem in the world today, ignorance or apathy?
A. I don't know and I couldn't care less.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread