From: Gertjan van Wingerde <gwingerde@gmail.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: Ivo van Doorn <IvDoorn@gmail.com>,
<linux-wireless@vger.kernel.org>, <users@rt2x00.serialmonkey.com>,
Gertjan van Wingerde <gwingerde@gmail.com>
Subject: [PATCH 7/9] rt2x00: Clean up all driver's kick_tx_queue callback functions.
Date: Sat, 8 May 2010 23:40:24 +0200 [thread overview]
Message-ID: <1273354826-4335-8-git-send-email-gwingerde@gmail.com> (raw)
In-Reply-To: <1273354826-4335-1-git-send-email-gwingerde@gmail.com>
All of the driver's kick_tx_queue callback functions treat the TX queue
for beacons in a special manner.
Clean this up by integrating the kicking of the beacon queue into the
write_beacon callback function, and let the generic code no longer call
the kick_tx_queue callback function when updating the beacon.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 19 ++++------
drivers/net/wireless/rt2x00/rt2500pci.c | 19 ++++------
drivers/net/wireless/rt2x00/rt2500usb.c | 55 +++++++++++-----------------
drivers/net/wireless/rt2x00/rt2800pci.c | 20 ++++------
drivers/net/wireless/rt2x00/rt2800usb.c | 29 +++++----------
drivers/net/wireless/rt2x00/rt2x00queue.c | 5 +--
drivers/net/wireless/rt2x00/rt61pci.c | 30 +++++++---------
drivers/net/wireless/rt2x00/rt73usb.c | 40 +++++++-------------
8 files changed, 83 insertions(+), 134 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 6f89891..9c13a4e 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1089,6 +1089,14 @@ static void rt2400pci_write_beacon(struct queue_entry *entry)
rt2x00_desc_read(entry_priv->desc, 1, &word);
rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
rt2x00_desc_write(entry_priv->desc, 1, word);
+
+ /*
+ * Enable beaconing again.
+ */
+ rt2x00_set_field32(®, CSR14_TSF_COUNT, 1);
+ rt2x00_set_field32(®, CSR14_TBCN, 1);
+ rt2x00_set_field32(®, CSR14_BEACON_GEN, 1);
+ rt2x00pci_register_write(rt2x00dev, CSR14, reg);
}
static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
@@ -1096,17 +1104,6 @@ static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
{
u32 reg;
- if (queue == QID_BEACON) {
- rt2x00pci_register_read(rt2x00dev, CSR14, ®);
- if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) {
- rt2x00_set_field32(®, CSR14_TSF_COUNT, 1);
- rt2x00_set_field32(®, CSR14_TBCN, 1);
- rt2x00_set_field32(®, CSR14_BEACON_GEN, 1);
- rt2x00pci_register_write(rt2x00dev, CSR14, reg);
- }
- return;
- }
-
rt2x00pci_register_read(rt2x00dev, TXCSR0, ®);
rt2x00_set_field32(®, TXCSR0_KICK_PRIO, (queue == QID_AC_BE));
rt2x00_set_field32(®, TXCSR0_KICK_TX, (queue == QID_AC_BK));
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index d9b6304..84ab56e 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1246,6 +1246,14 @@ static void rt2500pci_write_beacon(struct queue_entry *entry)
rt2x00_desc_read(entry_priv->desc, 1, &word);
rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
rt2x00_desc_write(entry_priv->desc, 1, word);
+
+ /*
+ * Enable beaconing again.
+ */
+ rt2x00_set_field32(®, CSR14_TSF_COUNT, 1);
+ rt2x00_set_field32(®, CSR14_TBCN, 1);
+ rt2x00_set_field32(®, CSR14_BEACON_GEN, 1);
+ rt2x00pci_register_write(rt2x00dev, CSR14, reg);
}
static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
@@ -1253,17 +1261,6 @@ static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
{
u32 reg;
- if (queue == QID_BEACON) {
- rt2x00pci_register_read(rt2x00dev, CSR14, ®);
- if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) {
- rt2x00_set_field32(®, CSR14_TSF_COUNT, 1);
- rt2x00_set_field32(®, CSR14_TBCN, 1);
- rt2x00_set_field32(®, CSR14_BEACON_GEN, 1);
- rt2x00pci_register_write(rt2x00dev, CSR14, reg);
- }
- return;
- }
-
rt2x00pci_register_read(rt2x00dev, TXCSR0, ®);
rt2x00_set_field32(®, TXCSR0_KICK_PRIO, (queue == QID_AC_BE));
rt2x00_set_field32(®, TXCSR0_KICK_TX, (queue == QID_AC_BK));
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index f90b308..5ee9b9f 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1090,7 +1090,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
int pipe = usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint);
int length;
- u16 reg;
+ u16 reg, reg0;
/*
* Add the descriptor in front of the skb.
@@ -1132,6 +1132,26 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
* Send out the guardian byte.
*/
usb_submit_urb(bcn_priv->guardian_urb, GFP_ATOMIC);
+
+ /*
+ * Enable beaconing again.
+ */
+ rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1);
+ rt2x00_set_field16(®, TXRX_CSR19_TBCN, 1);
+ reg0 = reg;
+ rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 1);
+ /*
+ * Beacon generation will fail initially.
+ * To prevent this we need to change the TXRX_CSR19
+ * register several times (reg0 is the same as reg
+ * except for TXRX_CSR19_BEACON_GEN, which is 0 in reg0
+ * and 1 in reg).
+ */
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
}
static int rt2500usb_get_tx_data_len(struct queue_entry *entry)
@@ -1148,37 +1168,6 @@ static int rt2500usb_get_tx_data_len(struct queue_entry *entry)
return length;
}
-static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
- const enum data_queue_qid queue)
-{
- u16 reg, reg0;
-
- if (queue != QID_BEACON) {
- rt2x00usb_kick_tx_queue(rt2x00dev, queue);
- return;
- }
-
- rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®);
- if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) {
- rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1);
- rt2x00_set_field16(®, TXRX_CSR19_TBCN, 1);
- reg0 = reg;
- rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 1);
- /*
- * Beacon generation will fail initially.
- * To prevent this we need to change the TXRX_CSR19
- * register several times (reg0 is the same as reg
- * except for TXRX_CSR19_BEACON_GEN, which is 0 in reg0
- * and 1 in reg).
- */
- rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
- rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0);
- rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
- rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0);
- rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
- }
-}
-
/*
* RX control handlers
*/
@@ -1777,7 +1766,7 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
.write_tx_data = rt2x00usb_write_tx_data,
.write_beacon = rt2500usb_write_beacon,
.get_tx_data_len = rt2500usb_get_tx_data_len,
- .kick_tx_queue = rt2500usb_kick_tx_queue,
+ .kick_tx_queue = rt2x00usb_kick_tx_queue,
.kill_tx_queue = rt2x00usb_kill_tx_queue,
.fill_rxdone = rt2500usb_fill_rxdone,
.config_shared_key = rt2500usb_config_key,
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 308842a..6d56460 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -705,6 +705,14 @@ static void rt2800pci_write_beacon(struct queue_entry *entry)
entry->skb->data, entry->skb->len);
/*
+ * Enable beaconing again.
+ */
+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
+ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1);
+ rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+ /*
* Clean up beacon skb.
*/
dev_kfree_skb_any(entry->skb);
@@ -716,18 +724,6 @@ static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
{
struct data_queue *queue;
unsigned int idx, qidx = 0;
- u32 reg;
-
- if (queue_idx == QID_BEACON) {
- rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®);
- if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
- rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
- rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
- rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1);
- rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
- }
- return;
- }
if (queue_idx > QID_HCCA && queue_idx != QID_MGMT)
return;
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index db37119..dbec718 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -459,6 +459,14 @@ static void rt2800usb_write_beacon(struct queue_entry *entry)
REGISTER_TIMEOUT32(entry->skb->len));
/*
+ * Enable beaconing again.
+ */
+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
+ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1);
+ rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+ /*
* Clean up the beacon skb.
*/
dev_kfree_skb(entry->skb);
@@ -480,25 +488,6 @@ static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
return length;
}
-static void rt2800usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
- const enum data_queue_qid queue)
-{
- u32 reg;
-
- if (queue != QID_BEACON) {
- rt2x00usb_kick_tx_queue(rt2x00dev, queue);
- return;
- }
-
- rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®);
- if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
- rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
- rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
- rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1);
- rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
- }
-}
-
/*
* RX control handlers
*/
@@ -667,7 +656,7 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
.write_tx_data = rt2x00usb_write_tx_data,
.write_beacon = rt2800usb_write_beacon,
.get_tx_data_len = rt2800usb_get_tx_data_len,
- .kick_tx_queue = rt2800usb_kick_tx_queue,
+ .kick_tx_queue = rt2x00usb_kick_tx_queue,
.kill_tx_queue = rt2x00usb_kill_tx_queue,
.fill_rxdone = rt2800usb_fill_rxdone,
.config_shared_key = rt2800_config_shared_key,
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 8768c6f..7ab4fbb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -606,12 +606,9 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);
/*
- * Send beacon to hardware.
- * Also enable beacon generation, which might have been disabled
- * by the driver during the config_beacon() callback function.
+ * Send beacon to hardware and enable beacon genaration..
*/
rt2x00dev->ops->lib->write_beacon(intf->beacon);
- rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON);
mutex_unlock(&intf->beacon_skb_mutex);
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 1b0c70d..9e3a1ee 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1869,6 +1869,19 @@ static void rt61pci_write_beacon(struct queue_entry *entry)
entry->skb->data, entry->skb->len);
/*
+ * Enable beaconing again.
+ *
+ * For Wi-Fi faily generated beacons between participating
+ * stations. Set TBTT phase adaptive adjustment step to 8us.
+ */
+ rt2x00pci_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
+
+ rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1);
+ rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1);
+ rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1);
+ rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+
+ /*
* Clean up beacon skb.
*/
dev_kfree_skb_any(entry->skb);
@@ -1880,23 +1893,6 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
{
u32 reg;
- if (queue == QID_BEACON) {
- /*
- * For Wi-Fi faily generated beacons between participating
- * stations. Set TBTT phase adaptive adjustment step to 8us.
- */
- rt2x00pci_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
-
- rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®);
- if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
- rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1);
- rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1);
- rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1);
- rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
- }
- return;
- }
-
rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®);
rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0, (queue == QID_AC_BE));
rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1, (queue == QID_AC_BK));
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 6acba62..ca3707a 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1536,6 +1536,19 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
REGISTER_TIMEOUT32(entry->skb->len));
/*
+ * Enable beaconing again.
+ *
+ * For Wi-Fi faily generated beacons between participating stations.
+ * Set TBTT phase adaptive adjustment step to 8us (default 16us)
+ */
+ rt2x00usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
+
+ rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1);
+ rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1);
+ rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1);
+ rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
+
+ /*
* Clean up the beacon skb.
*/
dev_kfree_skb(entry->skb);
@@ -1556,31 +1569,6 @@ static int rt73usb_get_tx_data_len(struct queue_entry *entry)
return length;
}
-static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
- const enum data_queue_qid queue)
-{
- u32 reg;
-
- if (queue != QID_BEACON) {
- rt2x00usb_kick_tx_queue(rt2x00dev, queue);
- return;
- }
-
- /*
- * For Wi-Fi faily generated beacons between participating stations.
- * Set TBTT phase adaptive adjustment step to 8us (default 16us)
- */
- rt2x00usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
-
- rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®);
- if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
- rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1);
- rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1);
- rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1);
- rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
- }
-}
-
/*
* RX control handlers
*/
@@ -2261,7 +2249,7 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
.write_tx_data = rt2x00usb_write_tx_data,
.write_beacon = rt73usb_write_beacon,
.get_tx_data_len = rt73usb_get_tx_data_len,
- .kick_tx_queue = rt73usb_kick_tx_queue,
+ .kick_tx_queue = rt2x00usb_kick_tx_queue,
.kill_tx_queue = rt2x00usb_kill_tx_queue,
.fill_rxdone = rt73usb_fill_rxdone,
.config_shared_key = rt73usb_config_shared_key,
--
1.7.1
next prev parent reply other threads:[~2010-05-08 21:40 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-08 21:40 [PATCH 0/9] rt2x00: Cleanups and fixes Gertjan van Wingerde
2010-05-08 21:40 ` [PATCH 1/9] rt2x00: Fix setting of txdesc->length field Gertjan van Wingerde
2010-05-09 9:03 ` Ivo Van Doorn
2010-05-09 9:18 ` Pavel Roskin
2010-05-08 21:40 ` [PATCH 2/9] rt2x00: Clean up rt2800usb.h Gertjan van Wingerde
2010-05-09 9:04 ` Ivo Van Doorn
2010-05-08 21:40 ` [PATCH 3/9] rt2x00: Don't check whether hardware crypto is enabled when reading RXD Gertjan van Wingerde
2010-05-09 9:08 ` Ivo Van Doorn
2010-05-08 21:40 ` [PATCH 4/9] rt2x00: Factor out TXWI writing to common rt2800 code Gertjan van Wingerde
2010-05-09 9:09 ` Ivo Van Doorn
2010-05-08 21:40 ` [PATCH 5/9] rt2x00: Factor out RXWI processing " Gertjan van Wingerde
2010-05-09 9:10 ` Ivo Van Doorn
2010-05-08 21:40 ` [PATCH 6/9] rt2x00: Clean up generic procedures on descriptor writing Gertjan van Wingerde
2010-05-09 9:11 ` Ivo Van Doorn
2010-05-09 18:54 ` Adam Baker
2010-05-09 19:23 ` Gertjan van Wingerde
2010-05-08 21:40 ` Gertjan van Wingerde [this message]
2010-05-09 9:16 ` [PATCH 7/9] rt2x00: Clean up all driver's kick_tx_queue callback functions Ivo Van Doorn
2010-05-08 21:40 ` [PATCH 8/9] rt2x00: provide beacon's txdesc to write_beacon callback function Gertjan van Wingerde
2010-05-09 9:17 ` Ivo Van Doorn
2010-05-08 21:40 ` [PATCH 9/9] rt2x00: Fix beaconing on rt2800 Gertjan van Wingerde
2010-05-09 9:21 ` Ivo Van Doorn
2010-05-09 9:41 ` Gertjan van Wingerde
2010-05-09 9:42 ` Ivo Van Doorn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1273354826-4335-8-git-send-email-gwingerde@gmail.com \
--to=gwingerde@gmail.com \
--cc=IvDoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=users@rt2x00.serialmonkey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).