Linux wireless drivers development
 help / color / mirror / Atom feed
From: reinette chatre <reinette.chatre@intel.com>
To: "sedat.dilek@gmail.com" <sedat.dilek@gmail.com>
Cc: "Kolekar, Abhijeet" <abhijeet.kolekar@intel.com>,
	Maxim Levitsky <maximlevitsky@gmail.com>,
	linux-wireless <linux-wireless@vger.kernel.org>,
	iwlwifi maling list <ipw3945-devel@lists.sourceforge.net>
Subject: Re: IWL3945 problems in 2.6.35-rc1
Date: Wed, 02 Jun 2010 23:00:03 -0700	[thread overview]
Message-ID: <1275544803.2091.30386.camel@rchatre-DESK> (raw)
In-Reply-To: <AANLkTimRt-8d5RkBtGVyReASZqBFIjSzOHPFV6RVjYlV@mail.gmail.com>

On Wed, 2010-06-02 at 01:35 -0700, Sedat Dilek wrote:
> This patch seems to be done against iwlwifi-2.6 GIT master.
> 
> Can you please offer a patch against vanilla 2.6.35-rc1 as requested
> so we can try and give feedback?

Sorry that you did not get this. Please try this patch:

>From 364614af1fbabe2989bb3e1434d50255a631546b Mon Sep 17 00:00:00 2001
From: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Date: Wed, 2 Jun 2010 21:15:10 -0700
Subject: [PATCH] iwl3945: fix internal scan

Port of internal scan to iwl3945 missed introduction
of iwl3945_get_single_channel_for_scan.

Fix the following bug by introducing the iwl3945_get_single_channel_for_scan
http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2208

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn-lib.c  |   30 +-------------
 drivers/net/wireless/iwlwifi/iwl-core.c     |   39 ++++++++++++++++++
 drivers/net/wireless/iwlwifi/iwl-core.h     |    2 +
 drivers/net/wireless/iwlwifi/iwl3945-base.c |   56 +++++++++++++++++++++++++-
 4 files changed, 96 insertions(+), 31 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
index 59aeb2e..ac4031e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
@@ -1031,10 +1031,9 @@ static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
 					   struct iwl_scan_channel *scan_ch)
 {
 	const struct ieee80211_supported_band *sband;
-	const struct iwl_channel_info *ch_info;
 	u16 passive_dwell = 0;
 	u16 active_dwell = 0;
-	int i, added = 0;
+	int added = 0;
 	u16 channel = 0;
 
 	sband = iwl_get_hw_mode(priv, band);
@@ -1049,32 +1048,7 @@ static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
 	if (passive_dwell <= active_dwell)
 		passive_dwell = active_dwell + 1;
 
-	/* only scan single channel, good enough to reset the RF */
-	/* pick the first valid not in-use channel */
-	if (band == IEEE80211_BAND_5GHZ) {
-		for (i = 14; i < priv->channel_count; i++) {
-			if (priv->channel_info[i].channel !=
-			    le16_to_cpu(priv->staging_rxon.channel)) {
-				channel = priv->channel_info[i].channel;
-				ch_info = iwl_get_channel_info(priv,
-					band, channel);
-				if (is_channel_valid(ch_info))
-					break;
-			}
-		}
-	} else {
-		for (i = 0; i < 14; i++) {
-			if (priv->channel_info[i].channel !=
-			    le16_to_cpu(priv->staging_rxon.channel)) {
-					channel =
-						priv->channel_info[i].channel;
-					ch_info = iwl_get_channel_info(priv,
-						band, channel);
-					if (is_channel_valid(ch_info))
-						break;
-			}
-		}
-	}
+	channel = iwl_get_single_channel_number(priv, band);
 	if (channel) {
 		scan_ch->channel = cpu_to_le16(channel);
 		scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 3ed3dbf..11b20ba 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -855,6 +855,45 @@ void iwl_set_rxon_chain(struct iwl_priv *priv)
 }
 EXPORT_SYMBOL(iwl_set_rxon_chain);
 
+/* Return valid channel */
+u8 iwl_get_single_channel_number(struct iwl_priv *priv,
+				  enum ieee80211_band band)
+{
+	const struct iwl_channel_info *ch_info;
+	int i;
+	u8 channel = 0;
+
+	/* only scan single channel, good enough to reset the RF */
+	/* pick the first valid not in-use channel */
+	if (band == IEEE80211_BAND_5GHZ) {
+		for (i = 14; i < priv->channel_count; i++) {
+			if (priv->channel_info[i].channel !=
+			    le16_to_cpu(priv->staging_rxon.channel)) {
+				channel = priv->channel_info[i].channel;
+				ch_info = iwl_get_channel_info(priv,
+					band, channel);
+				if (is_channel_valid(ch_info))
+					break;
+			}
+		}
+	} else {
+		for (i = 0; i < 14; i++) {
+			if (priv->channel_info[i].channel !=
+			    le16_to_cpu(priv->staging_rxon.channel)) {
+					channel =
+						priv->channel_info[i].channel;
+					ch_info = iwl_get_channel_info(priv,
+						band, channel);
+					if (is_channel_valid(ch_info))
+						break;
+			}
+		}
+	}
+
+	return channel;
+}
+EXPORT_SYMBOL(iwl_get_single_channel_number);
+
 /**
  * iwl_set_rxon_channel - Set the phymode and channel values in staging RXON
  * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 87dd573..244d163 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -347,6 +347,8 @@ int iwl_check_rxon_cmd(struct iwl_priv *priv);
 int iwl_full_rxon_required(struct iwl_priv *priv);
 void iwl_set_rxon_chain(struct iwl_priv *priv);
 int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch);
+u8 iwl_get_single_channel_number(struct iwl_priv *priv,
+				  enum ieee80211_band band);
 void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf);
 u8 iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
 			 struct ieee80211_sta_ht_cap *sta_ht_inf);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index a527895..2366394 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1785,6 +1785,49 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
 #endif
 }
 
+static int iwl3945_get_single_channel_for_scan(struct iwl_priv *priv,
+					       struct ieee80211_vif *vif,
+					       enum ieee80211_band band,
+					       struct iwl3945_scan_channel *scan_ch)
+{
+	const struct ieee80211_supported_band *sband;
+	u16 passive_dwell = 0;
+	u16 active_dwell = 0;
+	int added = 0;
+	u8 channel = 0;
+
+	sband = iwl_get_hw_mode(priv, band);
+	if (!sband) {
+		IWL_ERR(priv, "invalid band\n");
+		return added;
+	}
+
+	active_dwell = iwl_get_active_dwell_time(priv, band, 0);
+	passive_dwell = iwl_get_passive_dwell_time(priv, band, vif);
+
+	if (passive_dwell <= active_dwell)
+		passive_dwell = active_dwell + 1;
+
+
+	channel = iwl_get_single_channel_number(priv, band);
+
+	if (channel) {
+		scan_ch->channel = channel;
+		scan_ch->type = 0;	/* passive */
+		scan_ch->active_dwell = cpu_to_le16(active_dwell);
+		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+		/* Set txpower levels to defaults */
+		scan_ch->tpc.dsp_atten = 110;
+		if (band == IEEE80211_BAND_5GHZ)
+			scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
+		else
+			scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
+		added++;
+	} else
+		IWL_ERR(priv, "no valid channel found\n");
+	return added;
+}
+
 static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
 					 enum ieee80211_band band,
 				     u8 is_active, u8 n_probes,
@@ -2935,9 +2978,16 @@ void iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
 	/* select Rx antennas */
 	scan->flags |= iwl3945_get_antenna_flags(priv);
 
-	scan->channel_count =
-		iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
-			(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif);
+	if (priv->is_internal_short_scan) {
+		scan->channel_count =
+			iwl3945_get_single_channel_for_scan(priv, vif, band,
+				(void *)&scan->data[le16_to_cpu(
+				scan->tx_cmd.len)]);
+	} else {
+		scan->channel_count =
+			iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
+				(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif);
+	}
 
 	if (scan->channel_count == 0) {
 		IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
-- 
1.7.0.4




  reply	other threads:[~2010-06-03  6:00 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-01 12:25 IWL3945 problems in 2.6.35-rc1 Maxim Levitsky
2010-06-01 14:57 ` Maxim Levitsky
2010-06-01 15:21   ` Sedat Dilek
2010-06-01 18:12     ` Maxim Levitsky
2010-06-02 16:53       ` Maxim Levitsky
2010-06-02 18:01         ` Sedat Dilek
2010-06-01 19:03     ` Abhijeet Kolekar
2010-06-01 19:59       ` Maxim Levitsky
2010-06-02  8:35       ` Sedat Dilek
2010-06-03  6:00         ` reinette chatre [this message]
2010-06-03  9:18           ` Sedat Dilek
2010-06-03 15:55             ` reinette chatre
2010-06-18  9:28 ` Johannes Berg
2010-06-18 10:19   ` Maxim Levitsky
2010-06-18 10:30     ` Johannes Berg
2010-06-18 10:40       ` Maxim Levitsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1275544803.2091.30386.camel@rchatre-DESK \
    --to=reinette.chatre@intel.com \
    --cc=abhijeet.kolekar@intel.com \
    --cc=ipw3945-devel@lists.sourceforge.net \
    --cc=linux-wireless@vger.kernel.org \
    --cc=maximlevitsky@gmail.com \
    --cc=sedat.dilek@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox