From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org, Felix Fietkau <nbd@openwrt.org>
Subject: [PATCH 13/24] ath9k: remove duplicate WMM AC definitions
Date: Sat, 12 Jun 2010 00:33:51 -0400 [thread overview]
Message-ID: <1276317242-15540-14-git-send-email-lrodriguez@atheros.com> (raw)
In-Reply-To: <1276317242-15540-1-git-send-email-lrodriguez@atheros.com>
From: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 4 +--
drivers/net/wireless/ath/ath9k/beacon.c | 3 +-
drivers/net/wireless/ath/ath9k/debug.c | 8 ++--
drivers/net/wireless/ath/ath9k/init.c | 10 +++---
drivers/net/wireless/ath/ath9k/mac.h | 11 ++-----
drivers/net/wireless/ath/ath9k/main.c | 20 ++++++------
drivers/net/wireless/ath/ath9k/virtual.c | 2 +-
drivers/net/wireless/ath/ath9k/xmit.c | 46 +-----------------------------
8 files changed, 26 insertions(+), 78 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index c5c6629..a0f1567 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -291,7 +291,7 @@ struct ath_tx_control {
struct ath_tx {
u16 seq_no;
u32 txqsetup;
- int hwq_map[ATH9K_WME_AC_VO+1];
+ int hwq_map[WME_NUM_AC];
spinlock_t txbuflock;
struct list_head txbuf;
struct ath_txq txq[ATH9K_NUM_TX_QUEUES];
@@ -680,8 +680,6 @@ void ath9k_set_wiphy_idle(struct ath_wiphy *aphy, bool idle);
void ath_mac80211_stop_queue(struct ath_softc *sc, u16 skb_queue);
void ath_mac80211_start_queue(struct ath_softc *sc, u16 skb_queue);
-int ath_tx_get_qnum(struct ath_softc *sc, int qtype, int haltype);
-
void ath_start_rfkill_poll(struct ath_softc *sc);
extern void ath9k_rfkill_poll_state(struct ieee80211_hw *hw);
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index f43d85a..4d4b22d 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -38,8 +38,7 @@ int ath_beaconq_config(struct ath_softc *sc)
qi.tqi_cwmax = 0;
} else {
/* Adhoc mode; important thing is to use 2x cwmin. */
- qnum = ath_tx_get_qnum(sc, ATH9K_TX_QUEUE_DATA,
- ATH9K_WME_AC_BE);
+ qnum = sc->tx.hwq_map[WME_AC_BE];
ath9k_hw_get_txq_props(ah, qnum, &qi_be);
qi.tqi_aifs = qi_be.tqi_aifs;
qi.tqi_cwmin = 4*qi_be.tqi_cwmin;
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index a127bdb..a6cb48d 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -630,10 +630,10 @@ static const struct file_operations fops_wiphy = {
do { \
len += snprintf(buf + len, size - len, \
"%s%13u%11u%10u%10u\n", str, \
- sc->debug.stats.txstats[sc->tx.hwq_map[ATH9K_WME_AC_BE]].elem, \
- sc->debug.stats.txstats[sc->tx.hwq_map[ATH9K_WME_AC_BK]].elem, \
- sc->debug.stats.txstats[sc->tx.hwq_map[ATH9K_WME_AC_VI]].elem, \
- sc->debug.stats.txstats[sc->tx.hwq_map[ATH9K_WME_AC_VO]].elem); \
+ sc->debug.stats.txstats[sc->tx.hwq_map[WME_AC_BE]].elem, \
+ sc->debug.stats.txstats[sc->tx.hwq_map[WME_AC_BK]].elem, \
+ sc->debug.stats.txstats[sc->tx.hwq_map[WME_AC_VI]].elem, \
+ sc->debug.stats.txstats[sc->tx.hwq_map[WME_AC_VO]].elem); \
} while(0)
static ssize_t read_file_xmit(struct file *file, char __user *user_buf,
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 18d76ed..4e07830 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -426,7 +426,7 @@ static int ath9k_init_btcoex(struct ath_softc *sc)
r = ath_init_btcoex_timer(sc);
if (r)
return -1;
- qnum = ath_tx_get_qnum(sc, ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE);
+ qnum = sc->tx.hwq_map[WME_AC_BE];
ath9k_hw_init_btcoex_hw(sc->sc_ah, qnum);
sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
break;
@@ -463,23 +463,23 @@ static int ath9k_init_queues(struct ath_softc *sc)
sc->config.cabqReadytime = ATH_CABQ_READY_TIME;
ath_cabq_update(sc);
- if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
+ if (!ath_tx_setup(sc, WME_AC_BK)) {
ath_print(common, ATH_DBG_FATAL,
"Unable to setup xmit queue for BK traffic\n");
goto err;
}
- if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
+ if (!ath_tx_setup(sc, WME_AC_BE)) {
ath_print(common, ATH_DBG_FATAL,
"Unable to setup xmit queue for BE traffic\n");
goto err;
}
- if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
+ if (!ath_tx_setup(sc, WME_AC_VI)) {
ath_print(common, ATH_DBG_FATAL,
"Unable to setup xmit queue for VI traffic\n");
goto err;
}
- if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
+ if (!ath_tx_setup(sc, WME_AC_VO)) {
ath_print(common, ATH_DBG_FATAL,
"Unable to setup xmit queue for VO traffic\n");
goto err;
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index 3c65c91..7559fb2 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -577,13 +577,8 @@ enum ath9k_tx_queue {
#define ATH9K_NUM_TX_QUEUES 10
-enum ath9k_tx_queue_subtype {
- ATH9K_WME_AC_BK = 0,
- ATH9K_WME_AC_BE,
- ATH9K_WME_AC_VI,
- ATH9K_WME_AC_VO,
- ATH9K_WME_UPSD
-};
+/* Used as a queue subtype instead of a WMM AC */
+#define ATH9K_WME_UPSD 4
enum ath9k_tx_queue_flags {
TXQ_FLAG_TXOKINT_ENABLE = 0x0001,
@@ -617,7 +612,7 @@ enum ath9k_pkt_type {
struct ath9k_tx_queue_info {
u32 tqi_ver;
enum ath9k_tx_queue tqi_type;
- enum ath9k_tx_queue_subtype tqi_subtype;
+ int tqi_subtype;
enum ath9k_tx_queue_flags tqi_qflags;
u32 tqi_priority;
u32 tqi_aifs;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 846107c..200e390 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -814,19 +814,19 @@ int ath_get_hal_qnum(u16 queue, struct ath_softc *sc)
switch (queue) {
case 0:
- qnum = sc->tx.hwq_map[ATH9K_WME_AC_VO];
+ qnum = sc->tx.hwq_map[WME_AC_VO];
break;
case 1:
- qnum = sc->tx.hwq_map[ATH9K_WME_AC_VI];
+ qnum = sc->tx.hwq_map[WME_AC_VI];
break;
case 2:
- qnum = sc->tx.hwq_map[ATH9K_WME_AC_BE];
+ qnum = sc->tx.hwq_map[WME_AC_BE];
break;
case 3:
- qnum = sc->tx.hwq_map[ATH9K_WME_AC_BK];
+ qnum = sc->tx.hwq_map[WME_AC_BK];
break;
default:
- qnum = sc->tx.hwq_map[ATH9K_WME_AC_BE];
+ qnum = sc->tx.hwq_map[WME_AC_BE];
break;
}
@@ -838,16 +838,16 @@ int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc)
int qnum;
switch (queue) {
- case ATH9K_WME_AC_VO:
+ case WME_AC_VO:
qnum = 0;
break;
- case ATH9K_WME_AC_VI:
+ case WME_AC_VI:
qnum = 1;
break;
- case ATH9K_WME_AC_BE:
+ case WME_AC_BE:
qnum = 2;
break;
- case ATH9K_WME_AC_BK:
+ case WME_AC_BK:
qnum = 3;
break;
default:
@@ -1559,7 +1559,7 @@ static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue,
ath_print(common, ATH_DBG_FATAL, "TXQ Update failed\n");
if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC)
- if ((qnum == sc->tx.hwq_map[ATH9K_WME_AC_BE]) && !ret)
+ if ((qnum == sc->tx.hwq_map[WME_AC_BE]) && !ret)
ath_beaconq_config(sc);
mutex_unlock(&sc->mutex);
diff --git a/drivers/net/wireless/ath/ath9k/virtual.c b/drivers/net/wireless/ath/ath9k/virtual.c
index 105ad40..89423ca 100644
--- a/drivers/net/wireless/ath/ath9k/virtual.c
+++ b/drivers/net/wireless/ath/ath9k/virtual.c
@@ -219,7 +219,7 @@ static int ath9k_send_nullfunc(struct ath_wiphy *aphy,
info->control.rates[1].idx = -1;
memset(&txctl, 0, sizeof(struct ath_tx_control));
- txctl.txq = &sc->tx.txq[sc->tx.hwq_map[ATH9K_WME_AC_VO]];
+ txctl.txq = &sc->tx.txq[sc->tx.hwq_map[WME_AC_VO]];
txctl.frame_type = ps ? ATH9K_IFT_PAUSE : ATH9K_IFT_UNPAUSE;
if (ath_tx_start(aphy->hw, skb, &txctl) != 0)
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index ec124fb..9bff6c5 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -959,32 +959,6 @@ struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype)
return &sc->tx.txq[qnum];
}
-int ath_tx_get_qnum(struct ath_softc *sc, int qtype, int haltype)
-{
- int qnum;
-
- switch (qtype) {
- case ATH9K_TX_QUEUE_DATA:
- if (haltype >= ARRAY_SIZE(sc->tx.hwq_map)) {
- ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
- "HAL AC %u out of range, max %zu!\n",
- haltype, ARRAY_SIZE(sc->tx.hwq_map));
- return -1;
- }
- qnum = sc->tx.hwq_map[haltype];
- break;
- case ATH9K_TX_QUEUE_BEACON:
- qnum = sc->beacon.beaconq;
- break;
- case ATH9K_TX_QUEUE_CAB:
- qnum = sc->beacon.cabq->axq_qnum;
- break;
- default:
- qnum = -1;
- }
- return qnum;
-}
-
int ath_txq_update(struct ath_softc *sc, int qnum,
struct ath9k_tx_queue_info *qinfo)
{
@@ -2423,26 +2397,8 @@ void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an)
for (acno = 0, ac = &an->ac[acno];
acno < WME_NUM_AC; acno++, ac++) {
ac->sched = false;
+ ac->qnum = sc->tx.hwq_map[acno];
INIT_LIST_HEAD(&ac->tid_q);
-
- switch (acno) {
- case WME_AC_BE:
- ac->qnum = ath_tx_get_qnum(sc,
- ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE);
- break;
- case WME_AC_BK:
- ac->qnum = ath_tx_get_qnum(sc,
- ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BK);
- break;
- case WME_AC_VI:
- ac->qnum = ath_tx_get_qnum(sc,
- ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_VI);
- break;
- case WME_AC_VO:
- ac->qnum = ath_tx_get_qnum(sc,
- ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_VO);
- break;
- }
}
}
--
1.6.3.3
next prev parent reply other threads:[~2010-06-12 4:34 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-12 4:33 [PATCH 00/24] ath9k: new ANI, PAPrD and few fixes and cleanups Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 01/24] ath9k_hw: move clock definitions from hw.c to hw.h Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 02/24] ath9k_hw: fix clock rate calculations for ANI Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 03/24] ath9k_hw: clear MIB interrupt causes when skipping ANI adjustments Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 04/24] ath9k_hw: allow for spliting up ANI operations by family Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 05/24] ath9k_hw: add register definitions for the new ANI Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 06/24] ath9k_hw: inform ANI calibration when scanning Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 07/24] ath9k: add new ANI implementation for AR9003 Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 08/24] ath9k_hw: enable ANI " Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 09/24] ath9k_hw: reduce delay on programming INI on AR9003 Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 10/24] ath9k_hw: update 5 GHz tx gain tables for femless and high power PA Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 11/24] ath9k: fix mac80211 queue lookup for waking up queues Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 12/24] ath9k_htc: use common WMM AC definitions instead of ath9k ones Luis R. Rodriguez
2010-06-12 4:33 ` Luis R. Rodriguez [this message]
2010-06-12 4:33 ` [PATCH 14/24] ath9k: remove declarations of some nonexistant functions Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 15/24] ath9k: make ath_get_hal_qnum static Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 16/24] ath9k: fix extending the rx timestamp with the hardware TSF Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 17/24] ath9k: fix queue stopping threshold Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 18/24] ath9k: add a debugfs entry for ignoring CCA on the extension channel in HT40 Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 19/24] ath9k_hw: remove a useless function for setting the mac address Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 20/24] ath9k_hw: add register definitions related to PA predistortion Luis R. Rodriguez
2010-06-12 4:33 ` [PATCH 21/24] ath9k_hw: add support for parsing PA predistortion related EEPROM fields Luis R. Rodriguez
2010-06-12 4:34 ` [PATCH 22/24] ath9k_hw: add functions for controlling PA predistortion calibration Luis R. Rodriguez
2010-06-12 4:34 ` [PATCH 23/24] ath9k: implement PA predistortion support Luis R. Rodriguez
2010-06-12 4:34 ` [PATCH 24/24] ath9k: enable AR9003 PCI IDs Luis R. Rodriguez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1276317242-15540-14-git-send-email-lrodriguez@atheros.com \
--to=lrodriguez@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=nbd@openwrt.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox