From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org,
ipw3945-devel@lists.sourceforge.net,
Shanyu Zhao <shanyu.zhao@intel.com>,
Wey-Yi Guy <wey-yi.w.guy@intel.com>
Subject: [PATCH 1/4] iwlwifi: enable 6050 series Gen2 devices
Date: Fri, 9 Jul 2010 12:24:37 -0700 [thread overview]
Message-ID: <1278703480-13363-2-git-send-email-wey-yi.w.guy@intel.com> (raw)
In-Reply-To: <1278703480-13363-1-git-send-email-wey-yi.w.guy@intel.com>
From: Shanyu Zhao <shanyu.zhao@intel.com>
To enable 6050 series Gen 2 devices:
1) new PCI_IDs are added;
2) new EEPROM version and calibration version numbers defined;
3) new hardware REV number defined;
Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-6000.c | 38 +++++++++++++++++++++++++++++
drivers/net/wireless/iwlwifi/iwl-agn.c | 8 ++++++
drivers/net/wireless/iwlwifi/iwl-agn.h | 1 +
drivers/net/wireless/iwlwifi/iwl-csr.h | 1 +
drivers/net/wireless/iwlwifi/iwl-eeprom.h | 4 +++
5 files changed, 52 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 59681c5..0955219 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -829,6 +829,44 @@ struct iwl_cfg iwl6050_2agn_cfg = {
.need_dc_calib = true,
};
+struct iwl_cfg iwl6050g2_bgn_cfg = {
+ .name = "6050 Series 1x2 BGN Gen2",
+ .fw_name_pre = IWL6050_FW_PRE,
+ .ucode_api_max = IWL6050_UCODE_API_MAX,
+ .ucode_api_min = IWL6050_UCODE_API_MIN,
+ .sku = IWL_SKU_G|IWL_SKU_N,
+ .ops = &iwl6000_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6050G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6050G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_A,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x50,
+ .shadow_ram_support = true,
+ .ht_greenfield_support = true,
+ .led_compensation = 51,
+ .use_rts_for_ht = true, /* use rts/cts protection */
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1500,
+ .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 1024,
+ .ucode_tracing = true,
+ .sensitivity_calib_by_driver = true,
+ .chain_noise_calib_by_driver = true,
+ .need_dc_calib = true,
+};
+
struct iwl_cfg iwl6050_2abg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
.fw_name_pre = IWL6050_FW_PRE,
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 66c83b2..b5d1939 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -4323,6 +4323,14 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
{IWL_PCI_DEVICE(0x0089, 0x1311, iwl6050_2agn_cfg)},
{IWL_PCI_DEVICE(0x0089, 0x1316, iwl6050_2abg_cfg)},
+/* 6x50 WiFi/WiMax Series Gen2 */
+ {IWL_PCI_DEVICE(0x0885, 0x1305, iwl6050g2_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0885, 0x1306, iwl6050g2_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0885, 0x1325, iwl6050g2_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0885, 0x1326, iwl6050g2_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0886, 0x1315, iwl6050g2_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0886, 0x1316, iwl6050g2_bgn_cfg)},
+
/* 1000 Series WiFi */
{IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)},
{IWL_PCI_DEVICE(0x0083, 0x1305, iwl1000_bgn_cfg)},
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.h b/drivers/net/wireless/iwlwifi/iwl-agn.h
index 5c46b2c..cc6464d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.h
@@ -89,6 +89,7 @@ extern struct iwl_cfg iwl6000i_2bg_cfg;
extern struct iwl_cfg iwl6000_3agn_cfg;
extern struct iwl_cfg iwl6050_2agn_cfg;
extern struct iwl_cfg iwl6050_2abg_cfg;
+extern struct iwl_cfg iwl6050g2_bgn_cfg;
extern struct iwl_cfg iwl1000_bgn_cfg;
extern struct iwl_cfg iwl1000_bg_cfg;
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 254c35a..ecf98e7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -298,6 +298,7 @@
#define CSR_HW_REV_TYPE_1000 (0x0000060)
#define CSR_HW_REV_TYPE_6x00 (0x0000070)
#define CSR_HW_REV_TYPE_6x50 (0x0000080)
+#define CSR_HW_REV_TYPE_6x50g2 (0x0000084)
#define CSR_HW_REV_TYPE_6x00g2 (0x00000B0)
#define CSR_HW_REV_TYPE_NONE (0x00000F0)
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
index 95aa202..f8b707d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
@@ -276,6 +276,10 @@ struct iwl_eeprom_enhanced_txpwr {
#define EEPROM_6050_TX_POWER_VERSION (4)
#define EEPROM_6050_EEPROM_VERSION (0x532)
+/* 6x50g2 Specific */
+#define EEPROM_6050G2_TX_POWER_VERSION (6)
+#define EEPROM_6050G2_EEPROM_VERSION (0x553)
+
/* 6x00g2 Specific */
#define EEPROM_6000G2_TX_POWER_VERSION (6)
#define EEPROM_6000G2_EEPROM_VERSION (0x709)
--
1.7.0.4
next prev parent reply other threads:[~2010-07-09 19:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-09 19:24 [PATCH 0/4] iwlwifi update for 2.6.36 Wey-Yi Guy
2010-07-09 19:24 ` Wey-Yi Guy [this message]
2010-07-09 19:24 ` [PATCH 2/4] iwlwifi: correct descriptions of advanced ucode errors Wey-Yi Guy
2010-07-09 19:24 ` [PATCH 3/4] iwlagn: more generic description for iwlagn devices Wey-Yi Guy
2010-07-09 19:24 ` [PATCH 4/4] iwlagn: fix the bit mask of a FH register in stop Tx DMA flow Wey-Yi Guy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1278703480-13363-2-git-send-email-wey-yi.w.guy@intel.com \
--to=wey-yi.w.guy@intel.com \
--cc=ipw3945-devel@lists.sourceforge.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=shanyu.zhao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox