From: Rajkumar Manoharan <rmanoharan@atheros.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>,
Rajkumar Manoharan <rmanoharan@atheros.com>
Subject: [PATCH] ath9k_htc: load proper firmware for device ID 7015
Date: Fri, 13 Aug 2010 18:36:40 +0530 [thread overview]
Message-ID: <1281704800-4422-1-git-send-email-rmanoharan@atheros.com> (raw)
This patch handles the firmware loading properly
for device ID 7015.
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
---
drivers/net/wireless/ath/ath9k/eeprom.h | 1 +
drivers/net/wireless/ath/ath9k/eeprom_9287.c | 7 ++++++-
drivers/net/wireless/ath/ath9k/hif_usb.c | 8 ++------
drivers/net/wireless/ath/ath9k/htc_drv_init.c | 1 +
drivers/net/wireless/ath/ath9k/reg.h | 1 +
5 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h
index 8750c55..7f48df1 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/eeprom.h
@@ -191,6 +191,7 @@
#define AR9287_EEP_NO_BACK_VER AR9287_EEP_MINOR_VER_1
#define AR9287_EEP_START_LOC 128
+#define AR9287_HTC_EEP_START_LOC 256
#define AR9287_NUM_2G_CAL_PIERS 3
#define AR9287_NUM_2G_CCK_TARGET_POWERS 3
#define AR9287_NUM_2G_20_TARGET_POWERS 3
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
index 4a52cf0..dff2da7 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
@@ -34,9 +34,14 @@ static bool ath9k_hw_ar9287_fill_eeprom(struct ath_hw *ah)
struct ar9287_eeprom *eep = &ah->eeprom.map9287;
struct ath_common *common = ath9k_hw_common(ah);
u16 *eep_data;
- int addr, eep_start_loc = AR9287_EEP_START_LOC;
+ int addr, eep_start_loc;
eep_data = (u16 *)eep;
+ if (ah->hw_version.devid == 0x7015)
+ eep_start_loc = AR9287_HTC_EEP_START_LOC;
+ else
+ eep_start_loc = AR9287_EEP_START_LOC;
+
if (!ath9k_hw_use_flash(ah)) {
ath_print(common, ATH_DBG_EEPROM,
"Reading from EEPROM, not flash\n");
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 61c1bee..17e7a9a 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -799,7 +799,7 @@ static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev)
}
kfree(buf);
- if (hif_dev->device_id == 0x7010)
+ if ((hif_dev->device_id == 0x7010) || (hif_dev->device_id == 0x7015))
firm_offset = AR7010_FIRMWARE_TEXT;
else
firm_offset = AR9271_FIRMWARE_TEXT;
@@ -901,6 +901,7 @@ static int ath9k_hif_usb_probe(struct usb_interface *interface,
switch(hif_dev->device_id) {
case 0x7010:
+ case 0x7015:
case 0x9018:
if (le16_to_cpu(udev->descriptor.bcdDevice) == 0x0202)
hif_dev->fw_name = FIRMWARE_AR7010_1_1;
@@ -912,11 +913,6 @@ static int ath9k_hif_usb_probe(struct usb_interface *interface,
break;
}
- if (!hif_dev->fw_name) {
- dev_err(&udev->dev, "Can't determine firmware !\n");
- goto err_htc_hw_alloc;
- }
-
ret = ath9k_hif_usb_dev_init(hif_dev);
if (ret) {
ret = -EINVAL;
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 148b433..2d42791 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -245,6 +245,7 @@ static int ath9k_init_htc_services(struct ath9k_htc_priv *priv, u16 devid)
switch(devid) {
case 0x7010:
+ case 0x7015:
case 0x9018:
priv->htc->credits = 45;
break;
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 633e3d9..d01c4ad 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -899,6 +899,7 @@
#define AR_DEVID_7010(_ah) \
(((_ah)->hw_version.devid == 0x7010) || \
+ ((_ah)->hw_version.devid == 0x7015) || \
((_ah)->hw_version.devid == 0x9018))
#define AR_RADIO_SREV_MAJOR 0xf0
--
1.7.2.1
reply other threads:[~2010-08-13 13:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1281704800-4422-1-git-send-email-rmanoharan@atheros.com \
--to=rmanoharan@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox