linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* After compiling Openwrt, which image should I use for my TP-Link WR1043ND?
@ 2010-08-15  4:57 Robert Chan
  0 siblings, 0 replies; 2+ messages in thread
From: Robert Chan @ 2010-08-15  4:57 UTC (permalink / raw)
  To: linux-wireless@vger.kernel.org

Dear all,

I am pretty new to Openwrt.  I got through the compiling of it, and
selected the ar71xx as my target and TP-Link WR1043ND v1 as my
platform.  

Now, when I look into the /bin/ar71xx folder, however, I found quite a
few images:

openwrt-ar71xx-root.squashfs
openwrt-ar71xx-root.squashfs-4k
openwrt-ar71xx-uImage-gzip.bin
openwrt-ar71xx-uImage-lzma.bin
openwrt-ar71xx-vmlinux.bin
openwrt-ar71xx-vmlinux.elf
openwrt-ar71xx-vmlinux.gz
openwrt-ar71xx-vmlinux.lzma

Which image should I use to flash my router?  

According to the "Using the Image Builder Howto, I should be expecting
something like openwrt-ar71xx-tl-wr1043nd-v1-squashfs.bin, right?

Also, it looks to me that openwrt-ar71xx-root.squashfs is the one, but
it is 30MB big.  AFAIK, the tl-wr1043rd has only 32MB of RAM and 64MB of
flash, would it be too large?

Thanks very much in advance.

Robert



^ permalink raw reply	[flat|nested] 2+ messages in thread
* After compiling Openwrt, which image should I use for my TP-Link WR1043ND?
@ 2010-08-15  6:03 Robert Chan
  0 siblings, 0 replies; 2+ messages in thread
From: Robert Chan @ 2010-08-15  6:03 UTC (permalink / raw)
  To: linux-wireless@vger.kernel.org

Dear all,

Sorry for reposting.  The last one did not seem to have gone through.

I am pretty new to Openwrt.  I got through the compiling of it, and
selected the ar71xx as my target and TP-Link WR1043ND v1 as my
platform.  

Now, when I look into the /bin/ar71xx folder, however, I found quite a
few images:

openwrt-ar71xx-root.squashfs
openwrt-ar71xx-root.squashfs-4k
openwrt-ar71xx-uImage-gzip.bin
openwrt-ar71xx-uImage-lzma.bin
openwrt-ar71xx-vmlinux.bin
openwrt-ar71xx-vmlinux.elf
openwrt-ar71xx-vmlinux.gz
openwrt-ar71xx-vmlinux.lzma

Which image should I use to flash my router?  

According to the "Using the Image Builder Howto, I should be expecting
something like openwrt-ar71xx-tl-wr1043nd-v1-squashfs.bin, right?

Also, it looks to me that openwrt-ar71xx-root.squashfs is the one, but
it is 30MB big.  AFAIK, the tl-wr1043rd has only 32MB of RAM and 64MB of
flash, would it be too large?

Thanks very much in advance.

Robert





^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-08-15  6:03 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-08-15  4:57 After compiling Openwrt, which image should I use for my TP-Link WR1043ND? Robert Chan
  -- strict thread matches above, loose matches on Subject: below --
2010-08-15  6:03 Robert Chan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).