linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Robert Chan <robert.chan.list@gmail.com>
To: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: After compiling Openwrt, which image should I use for my TP-Link WR1043ND?
Date: Sun, 15 Aug 2010 14:03:05 +0800	[thread overview]
Message-ID: <1281852185.1932.25.camel@patrick-olevia> (raw)

Dear all,

Sorry for reposting.  The last one did not seem to have gone through.

I am pretty new to Openwrt.  I got through the compiling of it, and
selected the ar71xx as my target and TP-Link WR1043ND v1 as my
platform.  

Now, when I look into the /bin/ar71xx folder, however, I found quite a
few images:

openwrt-ar71xx-root.squashfs
openwrt-ar71xx-root.squashfs-4k
openwrt-ar71xx-uImage-gzip.bin
openwrt-ar71xx-uImage-lzma.bin
openwrt-ar71xx-vmlinux.bin
openwrt-ar71xx-vmlinux.elf
openwrt-ar71xx-vmlinux.gz
openwrt-ar71xx-vmlinux.lzma

Which image should I use to flash my router?  

According to the "Using the Image Builder Howto, I should be expecting
something like openwrt-ar71xx-tl-wr1043nd-v1-squashfs.bin, right?

Also, it looks to me that openwrt-ar71xx-root.squashfs is the one, but
it is 30MB big.  AFAIK, the tl-wr1043rd has only 32MB of RAM and 64MB of
flash, would it be too large?

Thanks very much in advance.

Robert





             reply	other threads:[~2010-08-15  6:03 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-15  6:03 Robert Chan [this message]
  -- strict thread matches above, loose matches on Subject: below --
2010-08-15  4:57 After compiling Openwrt, which image should I use for my TP-Link WR1043ND? Robert Chan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1281852185.1932.25.camel@patrick-olevia \
    --to=robert.chan.list@gmail.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).