linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: greearb@candelatech.com
To: linux-wireless@vger.kernel.org
Cc: Ben Greear <greearb@candelatech.com>
Subject: [PATCH] mac80211/ath9k:  Support AMPDU with multiple VIFs.
Date: Thu, 23 Sep 2010 09:44:36 -0700	[thread overview]
Message-ID: <1285260276-29105-1-git-send-email-greearb@candelatech.com> (raw)

From: Ben Greear <greearb@candelatech.com>

The old ieee80211_find_sta_by_hw method didn't properly
find VIFS when there was more than one per AP.  This caused
AMPDU logic in ath9k to get the wrong VIF when trying to
account for transmitted SKBs.

This patch changes ieee80211_find_sta_by_hw to take a
localaddr argument to distinguish between VIFs with the
same AP but different local addresses.  The method name
is changed to ieee80211_find_sta_by_ifaddr.

Signed-off-by: Ben Greear <greearb@candelatech.com>
---
:100644 100644 c5e7af4... 9cd0597... M	drivers/net/wireless/ath/ath9k/recv.c
:100644 100644 85a7323... f7da6b2... M	drivers/net/wireless/ath/ath9k/xmit.c
:100644 100644 12a49f0... a0afea1... M	include/net/mac80211.h
:100644 100644 44e10a9... ca2cba9... M	net/mac80211/sta_info.c
 drivers/net/wireless/ath/ath9k/recv.c |    6 +++++-
 drivers/net/wireless/ath/ath9k/xmit.c |    3 +--
 include/net/mac80211.h                |   25 ++++++++++++++-----------
 net/mac80211/sta_info.c               |   15 +++++++++++----
 4 files changed, 31 insertions(+), 18 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index c5e7af4..9cd0597 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -977,7 +977,11 @@ static void ath9k_process_rssi(struct ath_common *common,
 	 * at least one sdata of a wiphy on mac80211 but with ath9k virtual
 	 * wiphy you'd have to iterate over every wiphy and each sdata.
 	 */
-	sta = ieee80211_find_sta_by_hw(hw, hdr->addr2);
+	if (is_multicast_ether_addr(hdr->addr1))
+		sta = ieee80211_find_sta_by_ifaddr(hw, hdr->addr2, NULL);
+	else
+		sta = ieee80211_find_sta_by_ifaddr(hw, hdr->addr2, hdr->addr1);
+		
 	if (sta) {
 		an = (struct ath_node *) sta->drv_priv;
 		if (rx_stats->rs_rssi != ATH9K_RSSI_BAD &&
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 85a7323..f7da6b2 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -328,8 +328,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 
 	rcu_read_lock();
 
-	/* XXX: use ieee80211_find_sta! */
-	sta = ieee80211_find_sta_by_hw(hw, hdr->addr1);
+	sta = ieee80211_find_sta_by_ifaddr(hw, hdr->addr1, hdr->addr2);
 	if (!sta) {
 		rcu_read_unlock();
 
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 12a49f0..a0afea1 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -2416,25 +2416,28 @@ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
 					 const u8 *addr);
 
 /**
- * ieee80211_find_sta_by_hw - find a station on hardware
+ * ieee80211_find_sta_by_ifaddr - find a station on hardware
  *
  * @hw: pointer as obtained from ieee80211_alloc_hw()
- * @addr: station's address
+ * @addr: remote station's address
+ * @localaddr: local address (vif->sdata->vif.addr). Use NULL for 'any'.
  *
  * This function must be called under RCU lock and the
  * resulting pointer is only valid under RCU lock as well.
  *
- * NOTE: This function should not be used! When mac80211 is converted
- *	 internally to properly keep track of stations on multiple
- *	 virtual interfaces, it will not always know which station to
- *	 return here since a single address might be used by multiple
- *	 logical stations (e.g. consider a station connecting to another
- *	 BSSID on the same AP hardware without disconnecting first).
+ * NOTE: You may pass NULL for localaddr, but then you will just get
+ *      the first STA that matches the remote address 'addr'.
+ *      We can have multiple STA associated with multiple
+ *      logical stations (e.g. consider a station connecting to another
+ *      BSSID on the same AP hardware without disconnecting first).
+ *      In this case, the result of this method with localaddr NULL
+ *      is not reliable.
  *
- * DO NOT USE THIS FUNCTION.
+ * DO NOT USE THIS FUNCTION with localaddr NULL if at all possible.
  */
-struct ieee80211_sta *ieee80211_find_sta_by_hw(struct ieee80211_hw *hw,
-					       const u8 *addr);
+struct ieee80211_sta *ieee80211_find_sta_by_ifaddr(struct ieee80211_hw *hw,
+					       const u8 *addr,
+					       const u8 *localaddr);
 
 /**
  * ieee80211_sta_block_awake - block station from waking up
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 44e10a9..ca2cba9 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -838,13 +838,20 @@ void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata,
 	mutex_unlock(&local->sta_mtx);
 }
 
-struct ieee80211_sta *ieee80211_find_sta_by_hw(struct ieee80211_hw *hw,
-					       const u8 *addr)
+struct ieee80211_sta *ieee80211_find_sta_by_ifaddr(struct ieee80211_hw *hw,
+					       const u8 *addr,
+					       const u8 *localaddr)
 {
 	struct sta_info *sta, *nxt;
 
-	/* Just return a random station ... first in list ... */
+	/*
+	 * Just return a random station if localaddr is NULL
+	 * ... first in list.
+	 */
 	for_each_sta_info(hw_to_local(hw), addr, sta, nxt) {
+		if (localaddr &&
+		    compare_ether_addr(sta->sdata->vif.addr, localaddr) != 0)
+			continue;
 		if (!sta->uploaded)
 			return NULL;
 		return &sta->sta;
@@ -852,7 +859,7 @@ struct ieee80211_sta *ieee80211_find_sta_by_hw(struct ieee80211_hw *hw,
 
 	return NULL;
 }
-EXPORT_SYMBOL_GPL(ieee80211_find_sta_by_hw);
+EXPORT_SYMBOL_GPL(ieee80211_find_sta_by_ifaddr);
 
 struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
 					 const u8 *addr)
-- 
1.7.2.2


             reply	other threads:[~2010-09-23 16:44 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-09-23 16:44 greearb [this message]
2010-09-23 18:44 ` [PATCH] mac80211/ath9k: Support AMPDU with multiple VIFs Johannes Berg
  -- strict thread matches above, loose matches on Subject: below --
2010-09-23 13:54 greearb
2010-09-23 14:08 ` Johannes Berg
2010-09-23 16:26   ` Ben Greear

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1285260276-29105-1-git-send-email-greearb@candelatech.com \
    --to=greearb@candelatech.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).