From: Shahar Levi <shahar_levi@ti.com>
To: <linux-wireless@vger.kernel.org>
Cc: Luciano Coelho <luciano.coelho@nokia.com>
Subject: [PATCH v4 02/03] wl1271: 11n Support, ACX Commands
Date: Wed, 13 Oct 2010 16:09:40 +0200 [thread overview]
Message-ID: <1286978981-21467-3-git-send-email-shahar_levi@ti.com> (raw)
In-Reply-To: <1286978981-21467-1-git-send-email-shahar_levi@ti.com>
Added ACX command to the FW for 11n support.
Signed-off-by: Shahar Levi <shahar_levi@ti.com>
---
drivers/net/wireless/wl12xx/wl1271_acx.c | 83 ++++++++++++++++++++++++++++++
drivers/net/wireless/wl12xx/wl1271_acx.h | 5 ++
2 files changed, 88 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c
index 6189934..7bea322 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.c
@@ -1226,6 +1226,89 @@ out:
return ret;
}
+int wl1271_acx_set_ht_capabilities(struct wl1271 *wl,
+ struct ieee80211_sta_ht_cap *ht_cap,
+ bool allow_ht_operation)
+{
+ struct wl1271_acx_ht_capabilities *acx;
+ u8 mac_address[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+ int ret = 0;
+
+ wl1271_debug(DEBUG_ACX, "acx ht capabilities setting");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* Allow HT Operation ? */
+ if (allow_ht_operation) {
+ acx->ht_capabilites =
+ WL1271_ACX_FW_CAP_HT_OPERATION;
+ if (ht_cap->cap & IEEE80211_HT_CAP_GRN_FLD)
+ acx->ht_capabilites |=
+ WL1271_ACX_FW_CAP_GREENFIELD_FRAME_FORMAT;
+ if (ht_cap->cap & IEEE80211_HT_CAP_SGI_20)
+ acx->ht_capabilites |=
+ WL1271_ACX_FW_CAP_SHORT_GI_FOR_20MHZ_PACKETS;
+ if (ht_cap->cap & IEEE80211_HT_CAP_LSIG_TXOP_PROT)
+ acx->ht_capabilites |=
+ WL1271_ACX_FW_CAP_LSIG_TXOP_PROTECTION;
+
+ /* get data from A-MPDU parameters field */
+ acx->ampdu_max_length = ht_cap->ampdu_factor;
+ acx->ampdu_min_spacing = ht_cap->ampdu_density;
+
+ memcpy(acx->mac_address, mac_address, ETH_ALEN);
+ } else { /* HT operations are not allowed */
+ acx->ht_capabilites = 0;
+ }
+
+ ret = wl1271_cmd_configure(wl, ACX_PEER_HT_CAP, acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1271_warning("acx ht capabilities setting failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
+int wl1271_acx_set_ht_information(struct wl1271 *wl,
+ u16 ht_operation_mode)
+{
+ struct wl1271_acx_ht_information *acx;
+ int ret = 0;
+
+ wl1271_debug(DEBUG_ACX, "acx ht information setting");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ acx->ht_protection =
+ (u8)(ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION);
+ acx->rifs_mode = 0;
+ acx->gf_protection = 0;
+ acx->ht_tx_burst_limit = 0;
+ acx->dual_cts_protection = 0;
+
+ ret = wl1271_cmd_configure(wl, ACX_HT_BSS_OPERATION, acx, sizeof(*acx));
+
+ if (ret < 0) {
+ wl1271_warning("acx ht information setting failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
int wl1271_acx_tsf_info(struct wl1271 *wl, u64 *mactime)
{
struct wl1271_acx_fw_tsf_information *tsf_info;
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h
index 72597a2..35b0ccf 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.h
@@ -1174,6 +1174,11 @@ int wl1271_acx_keep_alive_config(struct wl1271 *wl, u8 index, u8 tpl_valid);
int wl1271_acx_rssi_snr_trigger(struct wl1271 *wl, bool enable,
s16 thold, u8 hyst);
int wl1271_acx_rssi_snr_avg_weights(struct wl1271 *wl);
+int wl1271_acx_set_ht_capabilities(struct wl1271 *wl,
+ struct ieee80211_sta_ht_cap *ht_cap,
+ bool allow_ht_operation);
+int wl1271_acx_set_ht_information(struct wl1271 *wl,
+ u16 ht_operation_mode);
int wl1271_acx_tsf_info(struct wl1271 *wl, u64 *mactime);
#endif /* __WL1271_ACX_H__ */
--
1.6.0.4
next prev parent reply other threads:[~2010-10-13 14:06 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-13 14:09 [PATCH v4 00/03] wl1271: 11n Support, add support to 80211n spec Shahar Levi
2010-10-13 14:09 ` [PATCH v4 01/03] wl1271: 11n Support, Add Definitions Shahar Levi
2010-10-13 14:09 ` Shahar Levi [this message]
2010-10-13 14:09 ` [PATCH v4 03/03] wl1271: 11n Support, functionality and configuration ability Shahar Levi
2010-10-18 14:09 ` [PATCH v4 00/03] wl1271: 11n Support, add support to 80211n spec Luciano Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1286978981-21467-3-git-send-email-shahar_levi@ti.com \
--to=shahar_levi@ti.com \
--cc=linux-wireless@vger.kernel.org \
--cc=luciano.coelho@nokia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).