From: Vasanthakumar Thiagarajan <vasanth@atheros.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>,
Senthil Balasubramanian <senthilkumar@atheros.com>
Subject: [PATCH 02/11] ath9k_hw: Add new member into the eeprom structure.
Date: Wed, 10 Nov 2010 05:03:07 -0800 [thread overview]
Message-ID: <1289394196-3465-2-git-send-email-vasanth@atheros.com> (raw)
In-Reply-To: <1289394196-3465-1-git-send-email-vasanth@atheros.com>
From: Senthil Balasubramanian <senthilkumar@atheros.com>
Add eeprom base extension structures which are needed for
AR938x caliberation changes and gain calculation.
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
---
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 21 +++++++++++++++------
drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 18 +++++++++++++++++-
2 files changed, 32 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index a88fe0d..bc3f49c 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -147,10 +147,13 @@ static const struct ar9300_eeprom ar9300_default = {
.papdRateMaskHt20 = LE32(0x80c080),
.papdRateMaskHt40 = LE32(0x80c080),
.futureModal = {
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
},
},
+ .base_ext1 = {
+ .ant_div_control = 0,
+ .future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+ },
.calFreqPier2G = {
FREQ2FBIN(2412, 1),
FREQ2FBIN(2437, 1),
@@ -285,8 +288,7 @@ static const struct ar9300_eeprom ar9300_default = {
/* Data[11].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1),
/* Data[11].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1),
/* Data[11].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1),
- /* Data[11].ctlEdges[3].bChannel */
- FREQ2FBIN(2462, 1),
+ /* Data[11].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1),
}
},
.ctlPowerData_2G = {
@@ -346,10 +348,17 @@ static const struct ar9300_eeprom ar9300_default = {
.papdRateMaskHt20 = LE32(0xf0e0e0),
.papdRateMaskHt40 = LE32(0xf0e0e0),
.futureModal = {
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
},
},
+ .base_ext2 = {
+ .tempSlopeLow = 0,
+ .tempSlopeHigh = 0,
+ .xatten1DBLow = {0, 0, 0},
+ .xatten1MarginLow = {0, 0, 0},
+ .xatten1DBHigh = {0, 0, 0},
+ .xatten1MarginHigh = {0, 0, 0}
+ },
.calFreqPier5G = {
FREQ2FBIN(5180, 0),
FREQ2FBIN(5220, 0),
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
index 3c533bb..5301df3 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
@@ -236,7 +236,7 @@ struct ar9300_modal_eep_header {
u8 thresh62;
__le32 papdRateMaskHt20;
__le32 papdRateMaskHt40;
- u8 futureModal[24];
+ u8 futureModal[10];
} __packed;
struct ar9300_cal_data_per_freq_op_loop {
@@ -274,6 +274,20 @@ struct cal_ctl_data_5g {
struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_5G];
} __packed;
+struct ar9300_BaseExtension_1 {
+ u8 ant_div_control;
+ u8 future[13];
+} __packed;
+
+struct ar9300_BaseExtension_2 {
+ int8_t tempSlopeLow;
+ int8_t tempSlopeHigh;
+ u8 xatten1DBLow[AR9300_MAX_CHAINS];
+ u8 xatten1MarginLow[AR9300_MAX_CHAINS];
+ u8 xatten1DBHigh[AR9300_MAX_CHAINS];
+ u8 xatten1MarginHigh[AR9300_MAX_CHAINS];
+} __packed;
+
struct ar9300_eeprom {
u8 eepromVersion;
u8 templateVersion;
@@ -283,6 +297,7 @@ struct ar9300_eeprom {
struct ar9300_base_eep_hdr baseEepHeader;
struct ar9300_modal_eep_header modalHeader2G;
+ struct ar9300_BaseExtension_1 base_ext1;
u8 calFreqPier2G[AR9300_NUM_2G_CAL_PIERS];
struct ar9300_cal_data_per_freq_op_loop
calPierData2G[AR9300_MAX_CHAINS][AR9300_NUM_2G_CAL_PIERS];
@@ -302,6 +317,7 @@ struct ar9300_eeprom {
u8 ctl_freqbin_2G[AR9300_NUM_CTLS_2G][AR9300_NUM_BAND_EDGES_2G];
struct cal_ctl_data_2g ctlPowerData_2G[AR9300_NUM_CTLS_2G];
struct ar9300_modal_eep_header modalHeader5G;
+ struct ar9300_BaseExtension_2 base_ext2;
u8 calFreqPier5G[AR9300_NUM_5G_CAL_PIERS];
struct ar9300_cal_data_per_freq_op_loop
calPierData5G[AR9300_MAX_CHAINS][AR9300_NUM_5G_CAL_PIERS];
--
1.7.0.4
next prev parent reply other threads:[~2010-11-10 13:03 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-10 13:03 [PATCH 01/11] ath9k_hw: Fix a reset failure on AR9382 (2x2) Vasanthakumar Thiagarajan
2010-11-10 13:03 ` Vasanthakumar Thiagarajan [this message]
2010-11-10 13:03 ` [PATCH 03/11] ath9k_hw: Initialize 2GHz CTL properly Vasanthakumar Thiagarajan
2010-11-10 13:03 ` [PATCH 04/11] ath9k_hw: Fix paprd training frame failure Vasanthakumar Thiagarajan
2010-11-10 13:03 ` [PATCH 05/11] ath9k_hw: add eeprom templates for ar9003 family chipsets Vasanthakumar Thiagarajan
2010-11-10 13:03 ` [PATCH 06/11] ath9k_hw: Fix XPABIAS level configuration for AR9003 Vasanthakumar Thiagarajan
2010-11-10 13:03 ` [PATCH 07/11] ath9k_hw: Enable strong signal detection " Vasanthakumar Thiagarajan
2010-11-10 13:03 ` [PATCH 08/11] ath9k_hw: Improve power control accuracy " Vasanthakumar Thiagarajan
2010-11-10 13:03 ` [PATCH 09/11] ath9k_hw: Add helper function for interpolation Vasanthakumar Thiagarajan
2010-11-10 13:03 ` [PATCH 10/11] ath9k: Fix bug in delimiter padding computation Vasanthakumar Thiagarajan
2010-11-10 13:03 ` [PATCH 11/11] ath9k_hw: Fix low throughput issue with AR93xx Vasanthakumar Thiagarajan
2010-11-10 16:23 ` [PATCH 01/11] ath9k_hw: Fix a reset failure on AR9382 (2x2) Felix Fietkau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1289394196-3465-2-git-send-email-vasanth@atheros.com \
--to=vasanth@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=senthilkumar@atheros.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).