* Ti's WL1271 on OMAP3EVM board with kernel version 2.6.36
@ 2010-11-11 11:16 raghunath
[not found] ` <AANLkTikZD_1DUqkxQyGSLdaQS01Qg15+_TDkW3QuRuOt@mail.gmail.com>
0 siblings, 1 reply; 8+ messages in thread
From: raghunath @ 2010-11-11 11:16 UTC (permalink / raw)
To: linux-wireless
[-- Attachment #1: Type: text/plain, Size: 9157 bytes --]
Hi,
I am working on OMAP3EVM board with Mistral wl1271 daughter board and using
linux kernel 2.6.36 I am using wl1271 drivers and getting this error pls
Let me know if any thing is wrong..
[ 2.556549] wl1271: chip id after firmware boot: 0x4030111
[ 2.576507] wl1271: cmd_box_addr 0x407b4 event_box_addr 0x4ce58
[ 2.576660] wl1271: acx event mbox mask
[ 2.576660] wl1271: cmd configure
[ 2.576995] MBOX ptrs: 0x4ce58 0x4ceac
[ 2.581146] MBOX ptrs: 0x4ce58 0x4ceac
[ 2.585083] wl1271: cmd test
[ 2.585479] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000000: 00 00 00 00
19 00 00 00 00 00 ec f6 00 0c 18 f8
[ 2.585510] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000010: fc 00 08 10
f0 f8 00 0a 14 00 00 00 00 00 00 00
[ 2.585540] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000020: 00 00 00 00
00 00 00 ee f4 f8 fe 05 ea f3 fa 01
[ 2.585571] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000030: 06 e5 f1 fa
02 07 d9 01 80 00 1d 1f 22 26 27 29
[ 2.585571] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000040: 1d 1f 22 26
27 27 16 1d 1e 20 24 25 50 50 50 50
[ 2.585601] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000050: 50 50 50 50
50 50 50 50 50 50 50 50 50 50 50 50
[ 2.585632] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000060: 50 50 50 50
50 50 50 50 01 02 02 02 02 00 15 15
[ 2.585662] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000070: 15 19 19 15
0e 1e 2d 00 9a 01 ae 01 c2 01 cc 01
[ 2.585662] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000080: db 01 db 01
d1 01 80 80 80 80 80 80 80 00 00 00
[ 2.585693] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000090: 00 00 00 00
1c 1e 21 23 25 50 18 1e 21 23 25 50
[ 2.585723] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 000000a0: 16 1c 1e 20
20 50 50 50 50 50 50 50 50 50 50 50
[ 2.585754] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 000000b0: 50 50 50 50
50 50 50 50 50 50 50 50 50 50 50 50
[ 2.585754] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 000000c0: 50 50 50 50
50 50 50 50 50 01 02 02 02 02 00 1a
[ 2.585784] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 000000d0: 1a 1a 1a 1a
1a 10 10 10 10 10 10 10 1e 2d 00 00
[ 2.585815] wl1271: cmd test
[ 2.586303] wl1271: cmd template_set 2
[ 2.586791] wl1271: cmd template_set 0
[ 2.587219] wl1271: cmd template_set 6
[ 2.587707] wl1271: cmd template_set 5
[ 2.588226] wl1271: cmd template_set 4
[ 2.588714] wl1271: cmd template_set 1
[ 2.589202] wl1271: cmd template_set 7
[ 2.589691] wl1271: cmd template_set 7
[ 2.590179] wl1271: cmd template_set 7
[ 2.590698] wl1271: cmd template_set 7
[ 2.591186] wl1271: wl1271 mem cfg
[ 2.591186] wl1271: cmd configure
[ 2.591674] wl1271: acx mem map
[ 2.591705] wl1271: cmd interrogate
[ 2.592193] wl1271: available tx blocks: 83
[ 2.592193] wl1271: acx rx msdu life time
[ 2.592224] wl1271: cmd configure
[ 2.592468] wl1271: acx rx config
[ 2.592498] wl1271: cmd configure
[ 2.592742] wl1271: acx data pd threshold
[ 2.592742] wl1271: cmd configure
[ 2.593017] wl1271: acx slot
[ 2.593017] wl1271: cmd configure
[ 2.593261] wl1271: acx group address tbl
[ 2.593292] wl1271: cmd configure
[ 2.593627] wl1271: acx service period timeout
[ 2.593627] wl1271: cmd configure
[ 2.593902] wl1271: acx rts threshold
[ 2.593902] wl1271: cmd configure
[ 2.594146] wl1271: acx connection monitor parameters: disabled
[ 2.594177] wl1271: cmd configure
[ 2.594421] wl1271: acx beacon filter opt
[ 2.594451] wl1271: cmd configure
[ 2.594757] wl1271: acx beacon filter table
[ 2.594757] wl1271: cmd configure
[ 2.595092] wl1271: acx tx config options
[ 2.595123] wl1271: cmd configure
[ 2.595367] wl1271: wl1271 rx interrupt config
[ 2.595367] wl1271: cmd configure
[ 2.595642] wl1271: acx sg cfg
[ 2.595642] wl1271: cmd configure
[ 2.598236] wl1271: acx sg enable
[ 2.598236] wl1271: cmd configure
[ 2.598510] wl1271: acx cca threshold
[ 2.598510] wl1271: cmd configure
[ 2.598754] wl1271: acx bcn dtim options
[ 2.598785] wl1271: cmd configure
[ 2.599029] wl1271: acx frag threshold
[ 2.599060] wl1271: cmd configure
[ 2.599304] wl1271: acx tid config
[ 2.599334] wl1271: cmd configure
[ 2.599578] wl1271: acx tid config
[ 2.599578] wl1271: cmd configure
[ 2.599822] wl1271: acx tid config
[ 2.599853] wl1271: cmd configure
[ 2.600097] wl1271: acx tid config
[ 2.600128] wl1271: cmd configure
[ 2.600372] wl1271: acx tid config
[ 2.600372] wl1271: cmd configure
[ 2.600616] wl1271: acx tid config
[ 2.600646] wl1271: cmd configure
[ 2.600891] wl1271: acx tid config
[ 2.600921] wl1271: cmd configure
[ 2.601165] wl1271: acx ac cfg 0 cw_ming 15 cw_max 63 aifs 3 txop 0
[ 2.601196] wl1271: cmd configure
[ 2.601440] wl1271: acx ac cfg 1 cw_ming 15 cw_max 63 aifs 7 txop 0
[ 2.601470] wl1271: cmd configure
[ 2.601715] wl1271: acx ac cfg 2 cw_ming 15 cw_max 63 aifs 1 txop 3008
[ 2.601745] wl1271: cmd configure
[ 2.601989] wl1271: acx ac cfg 3 cw_ming 15 cw_max 63 aifs 1 txop 1504
[ 2.602020] wl1271: cmd configure
[ 2.602264] wl1271: acx rate policies
[ 2.602264] wl1271: cmd configure
[ 2.602630] wl1271: cmd data path
[ 2.602905] wl1271: rx start cmd channel 1
[ 2.603149] wl1271: tx start cmd channel 1
[ 2.603179] wl1271: acx sleep auth
[ 2.603179] wl1271: cmd configure
[ 2.603454] wl1271: acx feature cfg
[ 2.603454] wl1271: cmd configure
[ 2.603881] wl1271: cmd set_default_wep_key 0
[ 2.604370] wl1271: acx pm config
[ 2.604400] wl1271: cmd configure
[ 2.604827] wl1271: acx keep alive config
[ 2.604827] wl1271: cmd configure
[ 2.605255] wl1271: acx keep alive config
[ 2.605285] wl1271: cmd configure
[ 2.605712] wl1271: acx keep alive config
[ 2.605712] wl1271: cmd configure
[ 2.606140] wl1271: acx keep alive config
[ 2.606140] wl1271: cmd configure
[ 2.606567] wl1271: acx keep alive mode: 0
[ 2.606597] wl1271: cmd configure
[ 2.607025] wl1271: acx rssi snr avg weights
[ 2.607025] wl1271: cmd configure
[ 2.607452] wl1271: firmware booted (Rev 6.1.0.0.343)
[ 2.607482] wl1271: mac80211 bss info changed
[ 2.607482] wl1271: acx slot
[ 2.607513] wl1271: cmd configure
[ 2.607940] wl1271: acx_set_preamble
[ 2.607940] wl1271: cmd configure
[ 2.608367] wl1271: acx_set_ctsprotect
[ 2.608398] wl1271: cmd configure
[ 2.608825] phy0: device now idle
[ 2.608886] wl1271: mac80211 config ch 1 psm off power 20 idle
[ 2.608917] wl1271: flushing tx buffer: 0
[ 2.608917] wl1271: acx rate policies
[ 2.608947] wl1271: cmd configure
[ 2.609466] wl1271: acx rate policies
[ 2.609466] wl1271: cmd configure
[ 2.609954] wl1271: acx keep alive config
[ 2.609985] wl1271: cmd configure
[ 2.610473] wl1271: acx dot11_cur_tx_pwr
[ 2.610473] wl1271: cmd configure
[ 2.610931] wl1271: mac80211 conf tx 0
[ 2.610931] wl1271: acx ac cfg 3 cw_ming 7 cw_max 15 aifs 2 txop 3264
[ 2.610961] wl1271: cmd configure
[ 2.611389] wl1271: acx tid config
[ 2.611389] wl1271: cmd configure
[ 2.611816] wl1271: mac80211 conf tx 1
[ 2.611846] wl1271: acx ac cfg 2 cw_ming 15 cw_max 31 aifs 2 txop 6016
[ 2.611877] wl1271: cmd configure
[ 2.612274] wl1271: acx tid config
[ 2.612304] wl1271: cmd configure
[ 2.612731] wl1271: mac80211 conf tx 2
[ 2.612762] wl1271: acx ac cfg 0 cw_ming 31 cw_max 1023 aifs 3 txop 0
[ 2.612762] wl1271: cmd configure
[ 2.613189] wl1271: acx tid config
[ 2.613220] wl1271: cmd configure
[ 2.613647] wl1271: mac80211 conf tx 3
[ 2.613647] wl1271: acx ac cfg 1 cw_ming 31 cw_max 1023 aifs 7 txop 0
[ 2.613677] wl1271: cmd configure
[ 2.614105] wl1271: acx tid config
[ 2.614105] wl1271: cmd configure
[ 2.614532] wl1271: mac80211 bss info changed
[ 2.614593] wl1271: mac80211 configure filter
[ 2.614624] wl1271: acx group address tbl
[ 2.614624] wl1271: cmd configure
[ 2.615173] AIRVOD __dev_change_flags net/core/dev.c ret = 0
[ 2.621398] wl1271: elp work
[ 2.621398] wl1271: chip to elp
[ 2.621459] wl1271: mac80211 configure filter
[ 2.621490] wl1271: waking up chip from elp
[ 3.118377] wl1271: ERROR ELP wakeup timeout!
[ 3.122955] wl1271: mac80211 configure filter
[ 3.122985] wl1271: waking up chip from elp
[ 3.618469] wl1271: ERROR ELP wakeup timeout!
[ 3.626098] Sending DHCP requests .
[ 5.627655] DHCP/BOOTP: Ignoring delayed packet
[ 7.266723] .
[ 8.767333] DHCP/BOOTP: Ignoring delayed packet
[ 12.508941] ., OK
[ 14.017211] IP-Config: Got DHCP answer from 0.0.0.0, my address is
192.168.1.14
[ 14.024993] AIRVOD __dev_change_flags net/core/dev.c ret = 0
[ 14.031341] AIRVOD __dev_change_flags net/core/dev.c ret = 0
[ 14.037750] wl1271: mac80211 configure filter
[ 14.037750] wl1271: waking up chip from elp
[ 14.037872] wl1271: mac80211 configure filter
[ 14.532409] wl1271: ERROR ELP wakeup timeout!
[ 14.537017] wl1271: waking up chip from elp
[ 15.032409] wl1271: ERROR ELP wakeup timeout!
[ 15.037017] wl1271: mac80211 remove interface
[ 15.037017] wl1271: down
[ 15.037139] wl1271: mac80211 stop
[-- Attachment #2: log_data.txt --]
[-- Type: text/plain, Size: 106729 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.36+ (raghu@raghu-laptop) (gcc version 4.2.1 (CodeSourcery Sourcery G++ Lite 2007q3-51)) #98 SMP Wed Nov 10 18:34:51 IST 2010
[ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: OMAP3 EVM
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
[ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
[ 0.000000] On node 0 totalpages: 22528
[ 0.000000] free_area_init_node: node 0, pgdat c0715a80, node_mem_map c07a6000
[ 0.000000] Normal zone: 176 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 22352 pages, LIFO batch:3
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c0859000 s7616 r8192 d12864 u65536
[ 0.000000] pcpu-alloc: s7616 r8192 d12864 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 22352
[ 0.000000] Kernel command line: console=ttyO0,115200n8 noinitrd rw ip=dhcp root=/dev/nfs nfsroot=192.168.1.4:/home/raghu/workdir/lsp/filesys,nolock mem=88M omapfb.rotate=1 omapfb.rotate_type=1 omap_vout.vid1_static_vrfb_alloc=y
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] allocated 450560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 88MB = 88MB total
[ 0.000000] Memory: 80992k/80992k available, 9120k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xc6000000 - 0xf8000000 ( 800 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc5800000 ( 88 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0008000 - 0xc004a000 ( 264 kB)
[ 0.000000] .text : 0xc004a000 - 0xc064b000 (6148 kB)
[ 0.000000] .data : 0xc0678000 - 0xc071bcc0 ( 656 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:402
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
[ 0.000000] Reprogramming SDRC clock to 332000000 Hz
[ 0.000000] GPMC revision 5.0
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] Could not get gpios_ick
[ 0.000000] Could not get gpios_fck
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696)
[ 0.000000] pid_max: default: 32768 minimum: 301
[ 0.000000] Mount-cache hash table entries: 512
[ 0.000000] Initializing cgroup subsys ns
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Initializing cgroup subsys memory
[ 0.000000] Initializing cgroup subsys freezer
[ 0.000000] Initializing cgroup subsys net_cls
[ 0.000000] CPU: Testing write buffer coherency: ok
[ 0.000000] Brought up 1 CPUs
[ 0.000000] SMP: Total of 1 processors activated (499.92 BogoMIPS).
[ 0.000000] device: 'platform': device_add
[ 0.000000] PM: Adding info for No Bus:platform
[ 0.000000] bus: 'platform': registered
[ 0.000000] Registering sysdev class 'cpu'
[ 0.000000] device: 'omap': device_add
[ 0.000000] PM: Adding info for No Bus:omap
[ 0.000000] regulator: core version 0.5
[ 0.000000] device class 'regulator': registering
[ 0.000000] NET: Registered protocol family 16
[ 0.000000] device class 'bdi': registering
[ 0.000000] device class 'gpio': registering
[ 0.000000] device: 'gpiochip0': device_add
[ 0.000000] PM: Adding info for No Bus:gpiochip0
[ 0.000000] device: 'gpiochip32': device_add
[ 0.000000] PM: Adding info for No Bus:gpiochip32
[ 0.000000] device: 'gpiochip64': device_add
[ 0.000000] PM: Adding info for No Bus:gpiochip64
[ 0.000000] device: 'gpiochip96': device_add
[ 0.000000] PM: Adding info for No Bus:gpiochip96
[ 0.000000] device: 'gpiochip128': device_add
[ 0.000000] PM: Adding info for No Bus:gpiochip128
[ 0.000000] device: 'gpiochip160': device_add
[ 0.000000] PM: Adding info for No Bus:gpiochip160
[ 0.000000] device class 'backlight': registering
[ 0.000000] device class 'tty': registering
[ 0.000000] device class 'vtconsole': registering
[ 0.000000] device: 'vtcon0': device_add
[ 0.000000] PM: Adding info for No Bus:vtcon0
[ 0.000000] bus: 'spi': registered
[ 0.000000] device class 'spi_master': registering
[ 0.000000] bus: 'i2c': registered
[ 0.000000] bus: 'i2c': add driver dummy
[ 0.000000] Registering platform device 'i2c_omap.1'. Parent at omap
[ 0.000000] device: 'i2c_omap.1': device_add
[ 0.000000] bus: 'platform': add device i2c_omap.1
[ 0.000000] PM: Adding info for platform:i2c_omap.1
[ 0.000000] mux: Setting signal i2c2_scl.i2c2_scl.i2c2_scl 0x0118 -> 0x0100
[ 0.000000] mux: Setting signal i2c2_sda.i2c2_sda.i2c2_sda 0x0118 -> 0x0100
[ 0.000000] Registering platform device 'i2c_omap.2'. Parent at omap
[ 0.000000] device: 'i2c_omap.2': device_add
[ 0.000000] bus: 'platform': add device i2c_omap.2
[ 0.000000] PM: Adding info for platform:i2c_omap.2
[ 0.000000] mux: Setting signal i2c3_scl.i2c3_scl.i2c3_scl 0x0118 -> 0x0100
[ 0.000000] mux: Setting signal i2c3_sda.i2c3_sda.i2c3_sda 0x0118 -> 0x0100
[ 0.000000] Registering platform device 'i2c_omap.3'. Parent at omap
[ 0.000000] device: 'i2c_omap.3': device_add
[ 0.000000] bus: 'platform': add device i2c_omap.3
[ 0.000000] PM: Adding info for platform:i2c_omap.3
[ 0.000000] Registering platform device 'omapdss'. Parent at platform
[ 0.000000] device: 'omapdss': device_add
[ 0.000000] bus: 'platform': add device omapdss
[ 0.000000] PM: Adding info for platform:omapdss
[ 0.000000] Registering platform device 'wl1271_data'. Parent at platform
[ 0.000000] device: 'wl1271_data': device_add
[ 0.000000] bus: 'platform': add device wl1271_data
[ 0.000000] PM: Adding info for platform:wl1271_data
[ 0.000000] Registering platform device 'reg-fixed-voltage.1'. Parent at platform
[ 0.000000] device: 'reg-fixed-voltage.1': device_add
[ 0.000000] bus: 'platform': add device reg-fixed-voltage.1
[ 0.000000] PM: Adding info for platform:reg-fixed-voltage.1
[ 0.000000] Registering platform device 'omap-hsuart.0'. Parent at omap
[ 0.000000] device: 'omap-hsuart.0': device_add
[ 0.000000] bus: 'platform': add device omap-hsuart.0
[ 0.000000] PM: Adding info for platform:omap-hsuart.0
[ 0.000000] Registering platform device 'omap-hsuart.1'. Parent at omap
[ 0.000000] device: 'omap-hsuart.1': device_add
[ 0.000000] bus: 'platform': add device omap-hsuart.1
[ 0.000000] PM: Adding info for platform:omap-hsuart.1
[ 0.000000] Registering platform device 'omap-hsuart.2'. Parent at omap
[ 0.000000] device: 'omap-hsuart.2': device_add
[ 0.000000] bus: 'platform': add device omap-hsuart.2
[ 0.000000] PM: Adding info for platform:omap-hsuart.2
[ 0.000000] mux: Setting signal etk_d8.gpio22 0x0100 -> 0x011c
[ 0.000000] mux: Setting signal gpmc_nbe1.gpio61 0x0118 -> 0x011c
[ 0.000000] mux: Setting signal etk_d7.gpio21 0x0100 -> 0x011c
[ 0.000000] Registering platform device 'smsc911x'. Parent at platform
[ 0.000000] device: 'smsc911x': device_add
[ 0.000000] bus: 'platform': add device smsc911x
[ 0.000000] PM: Adding info for platform:smsc911x
[ 0.000000] Registering platform device 'arm-pmu.0'. Parent at platform
[ 0.000000] device: 'arm-pmu.0': device_add
[ 0.000000] bus: 'platform': add device arm-pmu.0
[ 0.000000] PM: Adding info for platform:arm-pmu.0
[ 0.000000] Registering platform device 'omap-mcbsp.1'. Parent at platform
[ 0.000000] device: 'omap-mcbsp.1': device_add
[ 0.000000] bus: 'platform': add device omap-mcbsp.1
[ 0.000000] PM: Adding info for platform:omap-mcbsp.1
[ 0.000000] Registering platform device 'omap-mcbsp.2'. Parent at platform
[ 0.000000] device: 'omap-mcbsp.2': device_add
[ 0.000000] bus: 'platform': add device omap-mcbsp.2
[ 0.000000] PM: Adding info for platform:omap-mcbsp.2
[ 0.000000] Registering platform device 'omap-mcbsp.3'. Parent at platform
[ 0.000000] device: 'omap-mcbsp.3': device_add
[ 0.000000] bus: 'platform': add device omap-mcbsp.3
[ 0.000000] PM: Adding info for platform:omap-mcbsp.3
[ 0.000000] Registering platform device 'omap-mcbsp.4'. Parent at platform
[ 0.000000] device: 'omap-mcbsp.4': device_add
[ 0.000000] bus: 'platform': add device omap-mcbsp.4
[ 0.000000] PM: Adding info for platform:omap-mcbsp.4
[ 0.000000] Registering platform device 'omap-mcbsp.5'. Parent at platform
[ 0.000000] device: 'omap-mcbsp.5': device_add
[ 0.000000] bus: 'platform': add device omap-mcbsp.5
[ 0.000000] PM: Adding info for platform:omap-mcbsp.5
[ 0.000000] bus: 'platform': add driver omap-mcbsp
[ 0.000000] bus: 'platform': driver_probe_device: matched device omap-mcbsp.1 with driver omap-mcbsp
[ 0.000000] bus: 'platform': really_probe: probing driver omap-mcbsp with device omap-mcbsp.1
[ 0.000000] driver: 'omap-mcbsp.1': driver_bound: bound to device 'omap-mcbsp'
[ 0.000000] bus: 'platform': really_probe: bound device omap-mcbsp.1 to driver omap-mcbsp
[ 0.000000] bus: 'platform': driver_probe_device: matched device omap-mcbsp.2 with driver omap-mcbsp
[ 0.000000] bus: 'platform': really_probe: probing driver omap-mcbsp with device omap-mcbsp.2
[ 0.000000] driver: 'omap-mcbsp.2': driver_bound: bound to device 'omap-mcbsp'
[ 0.000000] bus: 'platform': really_probe: bound device omap-mcbsp.2 to driver omap-mcbsp
[ 0.000000] bus: 'platform': driver_probe_device: matched device omap-mcbsp.3 with driver omap-mcbsp
[ 0.000000] bus: 'platform': really_probe: probing driver omap-mcbsp with device omap-mcbsp.3
[ 0.000000] driver: 'omap-mcbsp.3': driver_bound: bound to device 'omap-mcbsp'
[ 0.000000] bus: 'platform': really_probe: bound device omap-mcbsp.3 to driver omap-mcbsp
[ 0.000000] bus: 'platform': driver_probe_device: matched device omap-mcbsp.4 with driver omap-mcbsp
[ 0.000000] bus: 'platform': really_probe: probing driver omap-mcbsp with device omap-mcbsp.4
[ 0.000000] driver: 'omap-mcbsp.4': driver_bound: bound to device 'omap-mcbsp'
[ 0.000000] bus: 'platform': really_probe: bound device omap-mcbsp.4 to driver omap-mcbsp
[ 0.000000] bus: 'platform': driver_probe_device: matched device omap-mcbsp.5 with driver omap-mcbsp
[ 0.000000] bus: 'platform': really_probe: probing driver omap-mcbsp with device omap-mcbsp.5
[ 0.000000] driver: 'omap-mcbsp.5': driver_bound: bound to device 'omap-mcbsp'
[ 0.000000] bus: 'platform': really_probe: bound device omap-mcbsp.5 to driver omap-mcbsp
[ 0.000000] Registering platform device 'omap_rng'. Parent at platform
[ 0.000000] device: 'omap_rng': device_add
[ 0.000000] bus: 'platform': add device omap_rng
[ 0.000000] PM: Adding info for platform:omap_rng
[ 0.000000] OMAP DMA hardware revision 4.0
[ 0.000000] Registering sysdev class 'gpio'
[ 0.000000] Registering sys device of class 'gpio'
[ 0.000000] Registering sys device 'gpio0'
[ 0.000030] Registering sys device of class 'cpu'
[ 0.000061] Registering sys device 'cpu0'
[ 0.004852] device: 'default': device_add
[ 0.004943] PM: Adding info for No Bus:default
[ 0.005523] bio: create slab <bio-0> at 0
[ 0.005615] device class 'block': registering
[ 0.005920] bus: 'platform': add driver twl4030_gpio
[ 0.006072] device class 'graphics': registering
[ 0.006134] bus: 'platform': add driver reg-fixed-voltage
[ 0.006195] bus: 'platform': driver_probe_device: matched device reg-fixed-voltage.1 with driver reg-fixed-voltage
[ 0.006225] bus: 'platform': really_probe: probing driver reg-fixed-voltage with device reg-fixed-voltage.1
[ 0.006286] device: 'regulator.0': device_add
[ 0.006378] PM: Adding info for No Bus:regulator.0
[ 0.006439] machine_constraints_voltage: override 'vwlan' min_uV, 1 -> 1800000
[ 0.006469] machine_constraints_voltage: override 'vwlan' max_uV, 2147483647 -> 1800000
[ 0.006500] regulator: vwlan: 1800 mV
[ 0.006530] reg-fixed-voltage reg-fixed-voltage.1: vwlan supplying 1800000uV
[ 0.006561] driver: 'reg-fixed-voltage.1': driver_bound: bound to device 'reg-fixed-voltage'
[ 0.006591] bus: 'platform': really_probe: bound device reg-fixed-voltage.1 to driver reg-fixed-voltage
[ 0.006652] bus: 'platform': add driver twl_reg
[ 0.006774] device class 'misc': registering
[ 0.006866] bus: 'i2c': add driver twl
[ 0.007263] device class 'scsi_host': registering
[ 0.007415] bus: 'scsi': registered
[ 0.007446] device class 'scsi_device': registering
[ 0.007537] SCSI subsystem initialized
[ 0.007568] device class 'mdio_bus': registering
[ 0.007690] bus: 'mdio_bus': registered
[ 0.007690] bus: 'mdio_bus': add driver Generic PHY
[ 0.007843] bus: 'serio': registered
[ 0.008056] device class 'input': registering
[ 0.008178] bus: 'platform': add driver i2c_omap
[ 0.008209] bus: 'platform': driver_probe_device: matched device i2c_omap.1 with driver i2c_omap
[ 0.008239] bus: 'platform': really_probe: probing driver i2c_omap with device i2c_omap.1
[ 0.008300] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.008331] omap_device: i2c_omap.1: new worst case activate latency 0: 30517
[ 0.008361] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 0!
[ 0.020233] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
[ 0.020294] device: 'i2c-1': device_add
[ 0.020324] bus: 'i2c': add device i2c-1
[ 0.020385] PM: Adding info for i2c:i2c-1
[ 0.020477] device: '1-0048': device_add
[ 0.020538] bus: 'i2c': add device 1-0048
[ 0.020568] PM: Adding info for i2c:1-0048
[ 0.020629] bus: 'i2c': driver_probe_device: matched device 1-0048 with driver twl
[ 0.020660] bus: 'i2c': really_probe: probing driver twl with device 1-0048
[ 0.020721] device: '1-0049': device_add
[ 0.020751] bus: 'i2c': add device 1-0049
[ 0.020812] PM: Adding info for i2c:1-0049
[ 0.020874] bus: 'i2c': driver_probe_device: matched device 1-0049 with driver dummy
[ 0.020874] bus: 'i2c': really_probe: probing driver dummy with device 1-0049
[ 0.020904] driver: '1-0049': driver_bound: bound to device 'dummy'
[ 0.020935] bus: 'i2c': really_probe: bound device 1-0049 to driver dummy
[ 0.020965] device: '1-004a': device_add
[ 0.021026] bus: 'i2c': add device 1-004a
[ 0.021057] PM: Adding info for i2c:1-004a
[ 0.021118] bus: 'i2c': driver_probe_device: matched device 1-004a with driver dummy
[ 0.021148] bus: 'i2c': really_probe: probing driver dummy with device 1-004a
[ 0.021179] driver: '1-004a': driver_bound: bound to device 'dummy'
[ 0.021179] bus: 'i2c': really_probe: bound device 1-004a to driver dummy
[ 0.021240] device: '1-004b': device_add
[ 0.021270] bus: 'i2c': add device 1-004b
[ 0.021331] PM: Adding info for i2c:1-004b
[ 0.021362] bus: 'i2c': driver_probe_device: matched device 1-004b with driver dummy
[ 0.021392] bus: 'i2c': really_probe: probing driver dummy with device 1-004b
[ 0.021423] driver: '1-004b': driver_bound: bound to device 'dummy'
[ 0.021453] bus: 'i2c': really_probe: bound device 1-004b to driver dummy
[ 0.021514] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.021545] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.021636] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.021667] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.021759] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.021759] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.021850] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.021881] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.021972] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.022003] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.022094] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.022125] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.022216] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.022216] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.022308] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.022338] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.022430] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.022430] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.022521] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.022552] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.022644] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.022644] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.022735] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.022766] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.022857] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.022888] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.023010] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.023010] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.023132] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.023162] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.023284] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.023284] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.023406] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.023437] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.023529] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.023559] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.023651] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.023681] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.023803] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.023803] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.023895] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.023925] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.024047] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.024047] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.024139] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.024169] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.024291] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.024291] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.024383] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.024414] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.024505] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.024536] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.024841] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 0.024902] twl4030: power (irq 373) chaining IRQs 376..383
[ 0.025085] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.025115] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.025238] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.025238] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.025360] Registering platform device 'twl4030_gpio'. Parent at 1-0049
[ 0.025390] device: 'twl4030_gpio': device_add
[ 0.025421] bus: 'platform': add device twl4030_gpio
[ 0.025482] PM: Adding info for platform:twl4030_gpio
[ 0.025573] bus: 'platform': driver_probe_device: matched device twl4030_gpio with driver twl4030_gpio
[ 0.025573] bus: 'platform': really_probe: probing driver twl4030_gpio with device twl4030_gpio
[ 0.025665] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 0.025695] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.025695] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.025817] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.025848] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.025970] device: 'gpiochip192': device_add
[ 0.026062] PM: Adding info for No Bus:gpiochip192
[ 0.026214] mux: Setting signal gpmc_wait1.gpio63 0x0118 -> 0x0104
[ 0.026245] mux: Setting signal gpmc_wait1.gpio63 0x0104 -> 0x011c
[ 0.026397] mux: Setting signal sdmmc1_clk.sdmmc1_clk 0x0018 -> 0x0118
[ 0.026519] mux: Setting signal sdmmc1_cmd.sdmmc1_cmd 0x0118 -> 0x0118
[ 0.026611] mux: Setting signal sdmmc1_dat0.sdmmc1_dat0 0x0118 -> 0x0118
[ 0.026702] mux: Setting signal sdmmc1_dat1.sdmmc1_dat1 0x0118 -> 0x0118
[ 0.026824] mux: Setting signal sdmmc1_dat2.sdmmc1_dat2 0x0118 -> 0x0118
[ 0.026916] mux: Setting signal sdmmc1_dat3.sdmmc1_dat3 0x0118 -> 0x0118
[ 0.026977] Registering platform device 'mmci-omap-hs.0'. Parent at platform
[ 0.027008] device: 'mmci-omap-hs.0': device_add
[ 0.027038] bus: 'platform': add device mmci-omap-hs.0
[ 0.027130] PM: Adding info for platform:mmci-omap-hs.0
[ 0.027252] mux: Setting signal sdmmc2_clk.sdmmc2_clk 0x0100 -> 0x0118
[ 0.027374] mux: Setting signal sdmmc2_cmd.sdmmc2_cmd 0x0118 -> 0x0118
[ 0.027465] mux: Setting signal sdmmc2_dat0.sdmmc2_dat0 0x0118 -> 0x0118
[ 0.027557] mux: Setting signal sdmmc2_dat1.sdmmc2_dat1 0x0118 -> 0x0118
[ 0.027679] mux: Setting signal sdmmc2_dat2.sdmmc2_dat2 0x0118 -> 0x0118
[ 0.027770] mux: Setting signal sdmmc2_dat3.sdmmc2_dat3 0x0118 -> 0x0118
[ 0.027801] Registering platform device 'mmci-omap-hs.1'. Parent at platform
[ 0.027832] device: 'mmci-omap-hs.1': device_add
[ 0.027862] bus: 'platform': add device mmci-omap-hs.1
[ 0.027984] PM: Adding info for platform:mmci-omap-hs.1
[ 0.028076] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.028106] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.028228] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.028228] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.028320] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.028350] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.028472] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.028503] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.028594] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.028594] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.028717] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.028717] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.028808] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.028839] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.028930] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.028961] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.029083] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.029083] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.029205] Registering platform device 'leds-gpio.211'. Parent at platform
[ 0.029205] device: 'leds-gpio.211': device_add
[ 0.029266] bus: 'platform': add device leds-gpio.211
[ 0.029327] PM: Adding info for platform:leds-gpio.211
[ 0.029388] driver: 'twl4030_gpio': driver_bound: bound to device 'twl4030_gpio'
[ 0.029418] bus: 'platform': really_probe: bound device twl4030_gpio to driver twl4030_gpio
[ 0.029449] Registering platform device 'twl4030_pwrbutton'. Parent at 1-0049
[ 0.029479] device: 'twl4030_pwrbutton': device_add
[ 0.029510] bus: 'platform': add device twl4030_pwrbutton
[ 0.029571] PM: Adding info for platform:twl4030_pwrbutton
[ 0.029632] Registering platform device 'twl_reg.6'. Parent at 1-004b
[ 0.029663] device: 'twl_reg.6': device_add
[ 0.029693] bus: 'platform': add device twl_reg.6
[ 0.029754] PM: Adding info for platform:twl_reg.6
[ 0.029815] bus: 'platform': driver_probe_device: matched device twl_reg.6 with driver twl_reg
[ 0.029815] bus: 'platform': really_probe: probing driver twl_reg with device twl_reg.6
[ 0.029876] device: 'regulator.1': device_add
[ 0.029968] PM: Adding info for No Bus:regulator.1
[ 0.030029] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.030059] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.030181] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
[ 0.030242] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.030273] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.030364] driver: 'twl_reg.6': driver_bound: bound to device 'twl_reg'
[ 0.030395] bus: 'platform': really_probe: bound device twl_reg.6 to driver twl_reg
[ 0.030426] Registering platform device 'twl_reg.3'. Parent at 1-004b
[ 0.030456] device: 'twl_reg.3': device_add
[ 0.030487] bus: 'platform': add device twl_reg.3
[ 0.030548] PM: Adding info for platform:twl_reg.3
[ 0.030609] bus: 'platform': driver_probe_device: matched device twl_reg.3 with driver twl_reg
[ 0.030639] bus: 'platform': really_probe: probing driver twl_reg with device twl_reg.3
[ 0.030700] device: 'regulator.2': device_add
[ 0.030792] PM: Adding info for No Bus:regulator.2
[ 0.030883] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.030883] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.031005] regulator: VDAC: 1800 mV normal standby
[ 0.031036] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.031066] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.031158] driver: 'twl_reg.3': driver_bound: bound to device 'twl_reg'
[ 0.031188] bus: 'platform': really_probe: bound device twl_reg.3 to driver twl_reg
[ 0.031219] Registering platform device 'twl_reg.5'. Parent at 1-004b
[ 0.031250] device: 'twl_reg.5': device_add
[ 0.031280] bus: 'platform': add device twl_reg.5
[ 0.031341] PM: Adding info for platform:twl_reg.5
[ 0.031402] bus: 'platform': driver_probe_device: matched device twl_reg.5 with driver twl_reg
[ 0.031433] bus: 'platform': really_probe: probing driver twl_reg with device twl_reg.5
[ 0.031463] device: 'regulator.3': device_add
[ 0.031555] PM: Adding info for No Bus:regulator.3
[ 0.031616] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.031646] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.031738] regulator: VPLL2: 1800 mV normal standby
[ 0.031799] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.031829] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.031921] driver: 'twl_reg.5': driver_bound: bound to device 'twl_reg'
[ 0.031921] bus: 'platform': really_probe: bound device twl_reg.5 to driver twl_reg
[ 0.031982] Registering platform device 'twl_reg.8'. Parent at 1-004b
[ 0.031982] device: 'twl_reg.8': device_add
[ 0.032012] bus: 'platform': add device twl_reg.8
[ 0.032073] PM: Adding info for platform:twl_reg.8
[ 0.032165] bus: 'platform': driver_probe_device: matched device twl_reg.8 with driver twl_reg
[ 0.032165] bus: 'platform': really_probe: probing driver twl_reg with device twl_reg.8
[ 0.032226] device: 'regulator.4': device_add
[ 0.032318] PM: Adding info for No Bus:regulator.4
[ 0.032379] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.032409] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.032531] regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
[ 0.032592] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.032623] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 1!
[ 0.032714] driver: 'twl_reg.8': driver_bound: bound to device 'twl_reg'
[ 0.032714] bus: 'platform': really_probe: bound device twl_reg.8 to driver twl_reg
[ 0.032745] driver: '1-0048': driver_bound: bound to device 'twl'
[ 0.032775] bus: 'i2c': really_probe: bound device 1-0048 to driver twl
[ 0.032806] driver: 'i2c_omap.1': driver_bound: bound to device 'i2c_omap'
[ 0.032836] bus: 'platform': really_probe: bound device i2c_omap.1 to driver i2c_omap
[ 0.032867] i2c_omap i2c_omap.1: __pm_runtime_suspend()!
[ 0.032897] omap_device: i2c_omap.1: new worst case deactivate latency 0: 30517
[ 0.032928] i2c_omap i2c_omap.1: __pm_runtime_suspend() returns 0!
[ 0.032958] bus: 'platform': driver_probe_device: matched device i2c_omap.2 with driver i2c_omap
[ 0.032958] bus: 'platform': really_probe: probing driver i2c_omap with device i2c_omap.2
[ 0.033020] i2c_omap i2c_omap.2: __pm_runtime_resume()!
[ 0.033050] i2c_omap i2c_omap.2: __pm_runtime_resume() returns 0!
[ 0.033142] i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz
[ 0.033172] device: 'i2c-2': device_add
[ 0.033233] bus: 'i2c': add device i2c-2
[ 0.033294] PM: Adding info for i2c:i2c-2
[ 0.033355] driver: 'i2c_omap.2': driver_bound: bound to device 'i2c_omap'
[ 0.033386] bus: 'platform': really_probe: bound device i2c_omap.2 to driver i2c_omap
[ 0.033416] i2c_omap i2c_omap.2: __pm_runtime_suspend()!
[ 0.033447] i2c_omap i2c_omap.2: __pm_runtime_suspend() returns 0!
[ 0.033447] bus: 'platform': driver_probe_device: matched device i2c_omap.3 with driver i2c_omap
[ 0.033477] bus: 'platform': really_probe: probing driver i2c_omap with device i2c_omap.3
[ 0.033538] i2c_omap i2c_omap.3: __pm_runtime_resume()!
[ 0.033569] i2c_omap i2c_omap.3: __pm_runtime_resume() returns 0!
[ 0.043640] i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
[ 0.043670] device: 'i2c-3': device_add
[ 0.043701] bus: 'i2c': add device i2c-3
[ 0.043762] PM: Adding info for i2c:i2c-3
[ 0.043853] driver: 'i2c_omap.3': driver_bound: bound to device 'i2c_omap'
[ 0.043853] bus: 'platform': really_probe: bound device i2c_omap.3 to driver i2c_omap
[ 0.043884] i2c_omap i2c_omap.3: __pm_runtime_suspend()!
[ 0.043914] i2c_omap i2c_omap.3: __pm_runtime_suspend() returns 0!
[ 0.044036] AIRVOD mmc_init drivers/mmc/core/core.c
[ 0.044342] bus: 'mmc': registered
[ 0.044372] device class 'mmc_host': registering
[ 0.044525] bus: 'sdio': registered
[ 0.044555] device class 'leds': registering
[ 0.044647] device class 'net': registering
[ 0.044799] device: 'lo': device_add
[ 0.045104] PM: Adding info for No Bus:lo
[ 0.045379] NET: Registered protocol family 8
[ 0.045410] NET: Registered protocol family 20
[ 0.045440] device class 'atm': registering
[ 0.045532] device class 'ieee80211': registering
[ 0.045745] Registering platform device 'regulatory.0'. Parent at platform
[ 0.045776] device: 'regulatory.0': device_add
[ 0.045806] bus: 'platform': add device regulatory.0
[ 0.045898] PM: Adding info for platform:regulatory.0
[ 0.045989] cfg80211: Calling CRDA to update world regulatory domain
[ 0.047271] device class 'rfkill': registering
[ 0.047363] device: 'rfkill': device_add
[ 0.047454] PM: Adding info for No Bus:rfkill
[ 0.047515] device class 'ieee802154': registering
[ 0.047668] Switching to clocksource 32k_counter
[ 0.063201] device class 'mem': registering
[ 0.063323] device: 'mem': device_add
[ 0.063446] PM: Adding info for No Bus:mem
[ 0.063629] device: 'null': device_add
[ 0.063751] PM: Adding info for No Bus:null
[ 0.063812] device: 'zero': device_add
[ 0.063903] PM: Adding info for No Bus:zero
[ 0.063964] device: 'full': device_add
[ 0.064056] PM: Adding info for No Bus:full
[ 0.064147] device: 'random': device_add
[ 0.064208] PM: Adding info for No Bus:random
[ 0.064300] device: 'urandom': device_add
[ 0.064361] PM: Adding info for No Bus:urandom
[ 0.064453] device: 'kmsg': device_add
[ 0.064514] PM: Adding info for No Bus:kmsg
[ 0.064605] device: 'tty': device_add
[ 0.064697] PM: Adding info for No Bus:tty
[ 0.064788] device: 'console': device_add
[ 0.064880] PM: Adding info for No Bus:console
[ 0.064941] device: 'tty0': device_add
[ 0.065032] PM: Adding info for No Bus:tty0
[ 0.065093] device class 'vc': registering
[ 0.065155] device: 'vcs': device_add
[ 0.065277] PM: Adding info for No Bus:vcs
[ 0.065338] device: 'vcsa': device_add
[ 0.065399] PM: Adding info for No Bus:vcsa
[ 0.065490] device: 'vcs1': device_add
[ 0.065582] PM: Adding info for No Bus:vcs1
[ 0.065643] device: 'vcsa1': device_add
[ 0.065734] PM: Adding info for No Bus:vcsa1
[ 0.065795] device: 'tty1': device_add
[ 0.065917] PM: Adding info for No Bus:tty1
[ 0.065979] device: 'tty2': device_add
[ 0.066070] PM: Adding info for No Bus:tty2
[ 0.066131] device: 'tty3': device_add
[ 0.066223] PM: Adding info for No Bus:tty3
[ 0.066284] device: 'tty4': device_add
[ 0.066375] PM: Adding info for No Bus:tty4
[ 0.066436] device: 'tty5': device_add
[ 0.066528] PM: Adding info for No Bus:tty5
[ 0.066589] device: 'tty6': device_add
[ 0.066680] PM: Adding info for No Bus:tty6
[ 0.066772] device: 'tty7': device_add
[ 0.066864] PM: Adding info for No Bus:tty7
[ 0.066925] device: 'tty8': device_add
[ 0.067016] PM: Adding info for No Bus:tty8
[ 0.067077] device: 'tty9': device_add
[ 0.067199] PM: Adding info for No Bus:tty9
[ 0.067260] device: 'tty10': device_add
[ 0.067352] PM: Adding info for No Bus:tty10
[ 0.067413] device: 'tty11': device_add
[ 0.067504] PM: Adding info for No Bus:tty11
[ 0.067596] device: 'tty12': device_add
[ 0.067687] PM: Adding info for No Bus:tty12
[ 0.067749] device: 'tty13': device_add
[ 0.067840] PM: Adding info for No Bus:tty13
[ 0.067901] device: 'tty14': device_add
[ 0.068023] PM: Adding info for No Bus:tty14
[ 0.068084] device: 'tty15': device_add
[ 0.068206] PM: Adding info for No Bus:tty15
[ 0.068267] device: 'tty16': device_add
[ 0.068359] PM: Adding info for No Bus:tty16
[ 0.068420] device: 'tty17': device_add
[ 0.068542] PM: Adding info for No Bus:tty17
[ 0.068603] device: 'tty18': device_add
[ 0.068695] PM: Adding info for No Bus:tty18
[ 0.068756] device: 'tty19': device_add
[ 0.068878] PM: Adding info for No Bus:tty19
[ 0.068939] device: 'tty20': device_add
[ 0.069030] PM: Adding info for No Bus:tty20
[ 0.069122] device: 'tty21': device_add
[ 0.069213] PM: Adding info for No Bus:tty21
[ 0.069274] device: 'tty22': device_add
[ 0.069396] PM: Adding info for No Bus:tty22
[ 0.069458] device: 'tty23': device_add
[ 0.069549] PM: Adding info for No Bus:tty23
[ 0.069641] device: 'tty24': device_add
[ 0.069732] PM: Adding info for No Bus:tty24
[ 0.069793] device: 'tty25': device_add
[ 0.069915] PM: Adding info for No Bus:tty25
[ 0.069976] device: 'tty26': device_add
[ 0.070068] PM: Adding info for No Bus:tty26
[ 0.070159] device: 'tty27': device_add
[ 0.070281] PM: Adding info for No Bus:tty27
[ 0.070343] device: 'tty28': device_add
[ 0.070465] PM: Adding info for No Bus:tty28
[ 0.070526] device: 'tty29': device_add
[ 0.070617] PM: Adding info for No Bus:tty29
[ 0.070709] device: 'tty30': device_add
[ 0.070800] PM: Adding info for No Bus:tty30
[ 0.070892] device: 'tty31': device_add
[ 0.071014] PM: Adding info for No Bus:tty31
[ 0.071075] device: 'tty32': device_add
[ 0.071197] PM: Adding info for No Bus:tty32
[ 0.071258] device: 'tty33': device_add
[ 0.071472] PM: Adding info for No Bus:tty33
[ 0.071533] device: 'tty34': device_add
[ 0.071655] PM: Adding info for No Bus:tty34
[ 0.071716] device: 'tty35': device_add
[ 0.071838] PM: Adding info for No Bus:tty35
[ 0.071929] device: 'tty36': device_add
[ 0.072052] PM: Adding info for No Bus:tty36
[ 0.072113] device: 'tty37': device_add
[ 0.072235] PM: Adding info for No Bus:tty37
[ 0.072296] device: 'tty38': device_add
[ 0.072418] PM: Adding info for No Bus:tty38
[ 0.072479] device: 'tty39': device_add
[ 0.072601] PM: Adding info for No Bus:tty39
[ 0.072662] device: 'tty40': device_add
[ 0.072814] PM: Adding info for No Bus:tty40
[ 0.072875] device: 'tty41': device_add
[ 0.072998] PM: Adding info for No Bus:tty41
[ 0.073059] device: 'tty42': device_add
[ 0.073181] PM: Adding info for No Bus:tty42
[ 0.073242] device: 'tty43': device_add
[ 0.073394] PM: Adding info for No Bus:tty43
[ 0.073455] device: 'tty44': device_add
[ 0.073577] PM: Adding info for No Bus:tty44
[ 0.073638] device: 'tty45': device_add
[ 0.073760] PM: Adding info for No Bus:tty45
[ 0.073822] device: 'tty46': device_add
[ 0.073974] PM: Adding info for No Bus:tty46
[ 0.074035] device: 'tty47': device_add
[ 0.074188] PM: Adding info for No Bus:tty47
[ 0.074249] device: 'tty48': device_add
[ 0.074371] PM: Adding info for No Bus:tty48
[ 0.074432] device: 'tty49': device_add
[ 0.074554] PM: Adding info for No Bus:tty49
[ 0.074615] device: 'tty50': device_add
[ 0.074768] PM: Adding info for No Bus:tty50
[ 0.074829] device: 'tty51': device_add
[ 0.074951] PM: Adding info for No Bus:tty51
[ 0.075012] device: 'tty52': device_add
[ 0.075195] PM: Adding info for No Bus:tty52
[ 0.075256] device: 'tty53': device_add
[ 0.075408] PM: Adding info for No Bus:tty53
[ 0.075469] device: 'tty54': device_add
[ 0.075592] PM: Adding info for No Bus:tty54
[ 0.075653] device: 'tty55': device_add
[ 0.075836] PM: Adding info for No Bus:tty55
[ 0.075897] device: 'tty56': device_add
[ 0.076019] PM: Adding info for No Bus:tty56
[ 0.076080] device: 'tty57': device_add
[ 0.076202] PM: Adding info for No Bus:tty57
[ 0.076263] device: 'tty58': device_add
[ 0.076385] PM: Adding info for No Bus:tty58
[ 0.076477] device: 'tty59': device_add
[ 0.076568] PM: Adding info for No Bus:tty59
[ 0.076660] device: 'tty60': device_add
[ 0.076782] PM: Adding info for No Bus:tty60
[ 0.076843] device: 'tty61': device_add
[ 0.076965] PM: Adding info for No Bus:tty61
[ 0.077056] device: 'tty62': device_add
[ 0.077178] PM: Adding info for No Bus:tty62
[ 0.077239] device: 'tty63': device_add
[ 0.077362] PM: Adding info for No Bus:tty63
[ 0.077728] device class 'firmware': registering
[ 0.078002] NET: Registered protocol family 2
[ 0.078399] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.079833] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.079956] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.080078] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.080108] TCP reno registered
[ 0.080139] UDP hash table entries: 128 (order: 0, 4096 bytes)
[ 0.080169] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[ 0.080566] NET: Registered protocol family 1
[ 0.081329] RPC: Registered udp transport module.
[ 0.081359] RPC: Registered tcp transport module.
[ 0.081359] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.081726] Registering sysdev class 'timer'
[ 0.081817] Registering sys device of class 'timer'
[ 0.081848] Registering sys device 'timer0'
[ 0.081939] Registering platform device 'mpu.0'. Parent at omap
[ 0.081939] device: 'mpu.0': device_add
[ 0.082000] bus: 'platform': add device mpu.0
[ 0.082061] PM: Adding info for platform:mpu.0
[ 0.082183] Registering platform device 'iva.0'. Parent at omap
[ 0.082183] device: 'iva.0': device_add
[ 0.082214] bus: 'platform': add device iva.0
[ 0.082305] PM: Adding info for platform:iva.0
[ 0.082397] Registering platform device 'l3_main.0'. Parent at omap
[ 0.082397] device: 'l3_main.0': device_add
[ 0.082427] bus: 'platform': add device l3_main.0
[ 0.082519] PM: Adding info for platform:l3_main.0
[ 0.082672] Registering sysdev class 'timekeeping'
[ 0.082733] Registering sys device of class 'timekeeping'
[ 0.082763] Registering sys device 'timekeeping0'
[ 0.082824] Registering sysdev class 'clocksource'
[ 0.082855] Registering sys device of class 'clocksource'
[ 0.082885] Registering sys device 'clocksource0'
[ 0.083160] audit: initializing netlink socket (disabled)
[ 0.083221] type=2000 audit(0.265:1): initialized
[ 0.279815] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.281860] msgmni has been set to 158
[ 0.284606] io scheduler noop registered
[ 0.284637] io scheduler deadline registered
[ 0.284790] io scheduler cfq registered (default)
[ 0.285064] device: 'ptmx': device_add
[ 0.285308] PM: Adding info for No Bus:ptmx
[ 0.285430] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.285552] Registering platform device 'serial8250'. Parent at platform
[ 0.285583] device: 'serial8250': device_add
[ 0.285614] bus: 'platform': add device serial8250
[ 0.285705] PM: Adding info for platform:serial8250
[ 0.285827] device: 'ttyS0': device_add
[ 0.285980] PM: Adding info for No Bus:ttyS0
[ 0.286071] device: 'ttyS1': device_add
[ 0.286193] PM: Adding info for No Bus:ttyS1
[ 0.286285] device: 'ttyS2': device_add
[ 0.286407] PM: Adding info for No Bus:ttyS2
[ 0.286468] device: 'ttyS3': device_add
[ 0.286590] PM: Adding info for No Bus:ttyS3
[ 0.286651] bus: 'platform': add driver serial8250
[ 0.286743] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250
[ 0.286773] bus: 'platform': really_probe: probing driver serial8250 with device serial8250
[ 0.286804] driver: 'serial8250': driver_bound: bound to device 'serial8250'
[ 0.286834] bus: 'platform': really_probe: bound device serial8250 to driver serial8250
[ 0.286956] bus: 'platform': add driver omap-hsuart
[ 0.286987] bus: 'platform': driver_probe_device: matched device omap-hsuart.0 with driver omap-hsuart
[ 0.287017] bus: 'platform': really_probe: probing driver omap-hsuart with device omap-hsuart.0
[ 0.287078] omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
[ 0.877380] console [ttyO0] enabled
[ 0.881195] device: 'ttyO0': device_add
[ 0.881378] PM: Adding info for No Bus:ttyO0
[ 0.881469] driver: 'omap-hsuart.0': driver_bound: bound to device 'omap-hsuart'
[ 0.881500] bus: 'platform': really_probe: bound device omap-hsuart.0 to driver omap-hsuart
[ 0.881500] bus: 'platform': driver_probe_device: matched device omap-hsuart.1 with driver omap-hsuart
[ 0.881530] bus: 'platform': really_probe: probing driver omap-hsuart with device omap-hsuart.1
[ 0.881591] omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
[ 0.889343] device: 'ttyO1': device_add
[ 0.889526] PM: Adding info for No Bus:ttyO1
[ 0.889587] driver: 'omap-hsuart.1': driver_bound: bound to device 'omap-hsuart'
[ 0.889617] bus: 'platform': really_probe: bound device omap-hsuart.1 to driver omap-hsuart
[ 0.889648] bus: 'platform': driver_probe_device: matched device omap-hsuart.2 with driver omap-hsuart
[ 0.889678] bus: 'platform': really_probe: probing driver omap-hsuart with device omap-hsuart.2
[ 0.889739] omap-hsuart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
[ 0.897399] device: 'ttyO2': device_add
[ 0.897552] PM: Adding info for No Bus:ttyO2
[ 0.897613] driver: 'omap-hsuart.2': driver_bound: bound to device 'omap-hsuart'
[ 0.897644] bus: 'platform': really_probe: bound device omap-hsuart.2 to driver omap-hsuart
[ 0.897796] bus: 'i2c': add driver menelaus
[ 0.897918] device class 'scsi_disk': registering
[ 0.898010] bus: 'scsi': add driver sd
[ 0.898193] bus: 'scsi': add driver sr
[ 0.898284] device class 'scsi_generic': registering
[ 0.898437] bus: 'mdio_bus': add driver Marvell 88E1101
[ 0.898529] bus: 'mdio_bus': add driver Marvell 88E1112
[ 0.898590] bus: 'mdio_bus': add driver Marvell 88E1111
[ 0.898712] bus: 'mdio_bus': add driver Marvell 88E1118
[ 0.898803] bus: 'mdio_bus': add driver Marvell 88E1121R
[ 0.898864] bus: 'mdio_bus': add driver Marvell 88EC048
[ 0.898956] bus: 'mdio_bus': add driver Marvell 88E1145
[ 0.899017] bus: 'mdio_bus': add driver Marvell 88E1240
[ 0.899108] bus: 'mdio_bus': add driver Davicom DM9161E
[ 0.899200] bus: 'mdio_bus': add driver Davicom DM9161A
[ 0.899291] bus: 'mdio_bus': add driver Davicom DM9131
[ 0.899353] bus: 'mdio_bus': add driver Cicada Cis8204
[ 0.899505] bus: 'mdio_bus': add driver Cicada Cis8201
[ 0.899597] bus: 'mdio_bus': add driver LXT970
[ 0.899688] bus: 'mdio_bus': add driver LXT971
[ 0.899749] bus: 'mdio_bus': add driver LXT973
[ 0.899841] bus: 'mdio_bus': add driver QS6612
[ 0.899902] bus: 'mdio_bus': add driver SMSC LAN83C185
[ 0.899993] bus: 'mdio_bus': add driver SMSC LAN8187
[ 0.900054] bus: 'mdio_bus': add driver SMSC LAN8700
[ 0.900146] bus: 'mdio_bus': add driver SMSC LAN911x Internal PHY
[ 0.900238] bus: 'mdio_bus': add driver SMSC LAN8710/LAN8720
[ 0.900299] bus: 'mdio_bus': add driver Vitesse VSC8244
[ 0.900390] bus: 'mdio_bus': add driver Vitesse VSC8221
[ 0.900482] bus: 'mdio_bus': add driver Broadcom BCM5411
[ 0.900543] bus: 'mdio_bus': add driver Broadcom BCM5421
[ 0.900634] bus: 'mdio_bus': add driver Broadcom BCM5461
[ 0.900726] bus: 'mdio_bus': add driver Broadcom BCM5464
[ 0.900787] bus: 'mdio_bus': add driver Broadcom BCM5481
[ 0.900878] bus: 'mdio_bus': add driver Broadcom BCM5482
[ 0.900970] bus: 'mdio_bus': add driver Broadcom BCM50610
[ 0.901062] bus: 'mdio_bus': add driver Broadcom BCM50610M
[ 0.901153] bus: 'mdio_bus': add driver Broadcom BCM57780
[ 0.901245] bus: 'mdio_bus': add driver Broadcom BCMAC131
[ 0.901336] bus: 'mdio_bus': add driver Broadcom BCM5241
[ 0.901397] bus: 'mdio_bus': add driver ICPlus IP175C
[ 0.901489] bus: 'mdio_bus': add driver RTL821x Gigabit Ethernet
[ 0.901580] bus: 'mdio_bus': add driver ET1011C
[ 0.901672] Registering platform device 'Fixed MDIO bus.0'. Parent at platform
[ 0.901702] device: 'Fixed MDIO bus.0': device_add
[ 0.901733] bus: 'platform': add device Fixed MDIO bus.0
[ 0.901824] PM: Adding info for platform:Fixed MDIO bus.0
[ 0.901916] device: '0': device_add
[ 0.902008] PM: Adding info for No Bus:0
[ 0.902099] Fixed MDIO Bus: probed
[ 0.905670] bus: 'platform': add driver mdio-gpio
[ 0.905822] bus: 'mdio_bus': add driver NatSemi DP83865
[ 0.905883] bus: 'mdio_bus': add driver STe100p
[ 0.905975] bus: 'mdio_bus': add driver STe101p
[ 0.906066] bus: 'mdio_bus': add driver Micrel KS8001 or KS8721
[ 0.906158] bus: 'mdio_bus': add driver Micrel KSZ9021 Gigabit PHY
[ 0.906250] bus: 'mdio_bus': add driver Micrel KS8737
[ 0.906372] bus: 'mdio_bus': add driver Micrel KS8041
[ 0.906463] bus: 'mdio_bus': add driver Micrel KS8051
[ 0.906677] device: 'dummy0': device_add
[ 0.906982] PM: Adding info for No Bus:dummy0
[ 0.908294] device: 'ifb0': device_add
[ 0.908630] PM: Adding info for No Bus:ifb0
[ 0.909851] device: 'ifb1': device_add
[ 0.910217] PM: Adding info for No Bus:ifb1
[ 0.911437] bus: 'platform': add driver smc91x
[ 0.911590] bus: 'platform': add driver smc911x
[ 0.911712] bus: 'platform': add driver smsc911x
[ 0.911743] bus: 'platform': driver_probe_device: matched device smsc911x with driver smsc911x
[ 0.911773] bus: 'platform': really_probe: probing driver smsc911x with device smsc911x
[ 0.911804] smsc911x: Driver version 2008-10-21.
[ 0.917053] device: 'eth0': device_add
[ 0.917419] PM: Adding info for No Bus:eth0
[ 0.918762] device: 'ffffffff': device_add
[ 0.918853] PM: Adding info for No Bus:ffffffff
[ 0.919738] device: 'ffffffff:01': device_add
[ 0.919769] bus: 'mdio_bus': add device ffffffff:01
[ 0.919860] PM: Adding info for mdio_bus:ffffffff:01
[ 0.919952] bus: 'mdio_bus': driver_probe_device: matched device ffffffff:01 with driver SMSC LAN8700
[ 0.919982] bus: 'mdio_bus': really_probe: probing driver SMSC LAN8700 with device ffffffff:01
[ 0.920013] driver: 'ffffffff:01': driver_bound: bound to device 'SMSC LAN8700'
[ 0.920043] bus: 'mdio_bus': really_probe: bound device ffffffff:01 to driver SMSC LAN8700
[ 0.920074] smsc911x-mdio: probed
[ 0.923858] eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=ffffffff:01, irq=-1)
[ 0.932952] net eth0: MAC Address: 00:50:c2:7e:91:0b
[ 0.938171] driver: 'smsc911x': driver_bound: bound to device 'smsc911x'
[ 0.938201] bus: 'platform': really_probe: bound device smsc911x to driver smsc911x
[ 0.938323] bus: 'sdio': add driver wl1271_sdio
[ 0.938629] device: 'mice': device_add
[ 0.938812] PM: Adding info for No Bus:mice
[ 0.938903] device: 'psaux': device_add
[ 0.939025] PM: Adding info for No Bus:psaux
[ 0.939086] mice: PS/2 mouse device common for all mice
[ 0.944580] bus: 'serio': add driver atkbd
[ 0.945190] cpuidle: using governor ladder
[ 0.949645] cpuidle: using governor menu
[ 0.953765] bus: 'mmc': add driver mmcblk
[ 0.953887] AIRVOD platform_driver_probe drivers/base/platform.c
[ 0.960906] bus: 'platform': add driver mmci-omap
[ 0.961059] bus: 'platform': remove driver mmci-omap
[ 0.961120] driver: 'mmci-omap': driver_release
[ 0.961120] AIRVOD platform_driver_probe drivers/base/platform.c
[ 0.968139] bus: 'platform': add driver mmci-omap-hs
[ 0.968200] bus: 'platform': driver_probe_device: matched device mmci-omap-hs.0 with driver mmci-omap-hs
[ 0.968231] bus: 'platform': really_probe: probing driver mmci-omap-hs with device mmci-omap-hs.0
[ 0.968292] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.968353] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 0!
[ 0.968505] i2c_omap i2c_omap.1: __pm_runtime_suspend()!
[ 0.968536] i2c_omap i2c_omap.1: __pm_runtime_suspend() returns 0!
[ 0.968566] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.968597] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 0!
[ 0.968719] i2c_omap i2c_omap.1: __pm_runtime_suspend()!
[ 0.968750] i2c_omap i2c_omap.1: __pm_runtime_suspend() returns 0!
[ 0.969085] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.969116] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 0!
[ 0.969268] i2c_omap i2c_omap.1: __pm_runtime_suspend()!
[ 0.969299] i2c_omap i2c_omap.1: __pm_runtime_suspend() returns 0!
[ 0.969329] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.969360] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 0!
[ 0.969482] i2c_omap i2c_omap.1: __pm_runtime_suspend()!
[ 0.969512] i2c_omap i2c_omap.1: __pm_runtime_suspend() returns 0!
[ 0.969573] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.969635] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 0!
[ 0.970001] i2c_omap i2c_omap.1: __pm_runtime_suspend()!
[ 0.970031] i2c_omap i2c_omap.1: __pm_runtime_suspend() returns 0!
[ 0.970062] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.970092] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 0!
[ 0.970245] i2c_omap i2c_omap.1: __pm_runtime_suspend()!
[ 0.970275] i2c_omap i2c_omap.1: __pm_runtime_suspend() returns 0!
[ 0.970306] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.970336] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 0!
[ 0.970428] device: 'mmc0': device_add
[ 0.970458] i2c_omap i2c_omap.1: __pm_runtime_suspend()!
[ 0.970489] i2c_omap i2c_omap.1: __pm_runtime_suspend() returns 0!
[ 0.970642] PM: Adding info for No Bus:mmc0
[ 0.970764] AIRVOD mmc_start_host drivers/mmc/core/core.c
[ 0.977142] AIRVOD mmc_rescan drivers/mmc/core/core.c
[ 0.983398] driver: 'mmci-omap-hs.0': driver_bound: bound to device 'mmci-omap-hs'
[ 0.983428] bus: 'platform': really_probe: bound device mmci-omap-hs.0 to driver mmci-omap-hs
[ 0.983459] bus: 'platform': driver_probe_device: matched device mmci-omap-hs.1 with driver mmci-omap-hs
[ 0.983489] bus: 'platform': really_probe: probing driver mmci-omap-hs with device mmci-omap-hs.1
[ 0.983764] device: 'mmc1': device_add
[ 0.983856] PM: Adding info for No Bus:mmc1
[ 0.983947] AIRVOD mmc_start_host drivers/mmc/core/core.c
[ 0.990356] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 0.990417] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 0!
[ 0.990570] i2c_omap i2c_omap.1: __pm_runtime_suspend()!
[ 0.990600] i2c_omap i2c_omap.1: __pm_runtime_suspend() returns 0!
[ 0.990631] AIRVOD mmc_rescan drivers/mmc/core/core.c
[ 0.996887] driver: 'mmci-omap-hs.1': driver_bound: bound to device 'mmci-omap-hs'
[ 0.996917] bus: 'platform': really_probe: bound device mmci-omap-hs.1 to driver mmci-omap-hs
[ 0.997436] pktgen: Packet Generator for packet performance testing. Version: 2.74
[ 1.058044] IPv4 over IPv4 tunneling driver
[ 1.062530] device: 'tunl0': device_add
[ 1.062927] PM: Adding info for No Bus:tunl0
[ 1.079010] TCP probe registered (port=0) bufsize=4096
[ 1.084533] TCP cubic registered
[ 1.087982] Initializing XFRM netlink socket
[ 1.092559] NET: Registered protocol family 17
[ 1.097351] NET: Registered protocol family 15
[ 1.102386] Bridge firewalling registered
[ 1.106964] bus: 'platform': add driver dsa
[ 1.107238] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 1.114440] All bugs added by David S. Miller <davem@redhat.com>
[ 1.122558] CCID: Activated CCID 2 (TCP-like)
[ 1.127380] CCID: Activated CCID 3 (TCP-Friendly Rate Control)
[ 1.137725] SCTP: Hash tables configured (established 2048 bind 2048)
[ 1.145263] ARIVOD mmc_attach_sdio drivers/mmc/core/sdio.c
[ 1.151275] mmc1: card claims to support voltages below the defined range. These will be ignored.
[ 1.160675] AIRVOD mmc_sdio_init_card drivers/mmc/core/sdio.c
[ 1.168609] NET: Registered protocol family 21
[ 1.173370] lib80211: common routines for IEEE802.11 drivers
[ 1.179351] lib80211_crypt: registered algorithm 'NULL'
[ 1.179504] NET: Registered protocol family 36
[ 1.184234] Registering the dns_resolver key type
[ 1.189239] AIRVOD 1 mmc_sdio_init_card drivers/mmc/core/sdio.c
[ 1.196105] AIRVOD omap_hsmmc_init_card drivers/mmc/host/omap_hsmmc.c
[ 1.205871] Power Management for TI OMAP3.
[ 1.220184] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 1.228332] Registering sysdev class 'vfp'
[ 1.228454] Registering sys device of class 'vfp'
[ 1.228485] Registering sys device 'vfp0'
[ 1.228637] device: 'cpu_dma_latency': device_add
[ 1.228790] PM: Adding info for No Bus:cpu_dma_latency
[ 1.228881] device: 'network_latency': device_add
[ 1.229003] PM: Adding info for No Bus:network_latency
[ 1.229064] device: 'network_throughput': device_add
[ 1.229187] PM: Adding info for No Bus:network_throughput
[ 1.229309] registered taskstats version 1
[ 1.233673] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 1.233734] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 0!
[ 1.233978] i2c_omap i2c_omap.1: __pm_runtime_suspend()!
[ 1.234008] i2c_omap i2c_omap.1: __pm_runtime_suspend() returns 0!
[ 1.234039] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 1.234100] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 0!
[ 1.234344] i2c_omap i2c_omap.1: __pm_runtime_suspend()!
[ 1.234375] i2c_omap i2c_omap.1: __pm_runtime_suspend() returns 0!
[ 1.234405] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 1.234436] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 0!
[ 1.234710] i2c_omap i2c_omap.1: __pm_runtime_suspend()!
[ 1.234741] i2c_omap i2c_omap.1: __pm_runtime_suspend() returns 0!
[ 1.234771] i2c_omap i2c_omap.1: __pm_runtime_resume()!
[ 1.234802] i2c_omap i2c_omap.1: __pm_runtime_resume() returns 0!
[ 1.235076] i2c_omap i2c_omap.1: __pm_runtime_suspend()!
[ 1.235107] i2c_omap i2c_omap.1: __pm_runtime_suspend() returns 0!
[ 1.235198] bus: 'platform': add driver davinci_emac
[ 1.235443] Initalizing network drop monitor service
[ 1.243316] ARIVOD sdio_init_func drivers/mmc/core/sdio.c
[ 1.249206] ARIVOD 2 sdio_init_func drivers/mmc/core/sdio.c
[ 1.255279] ARIVOD sdio_init_func drivers/mmc/core/sdio.c
[ 1.261230] ARIVOD 2 sdio_init_func drivers/mmc/core/sdio.c
[ 1.267333] mmc1: new SDIO card at address 0001
[ 1.272094] device: 'mmc1:0001': device_add
[ 1.272155] bus: 'mmc': add device mmc1:0001
[ 1.272216] PM: Adding info for mmc:mmc1:0001
[ 1.272308] bus: 'mmc': driver_probe_device: matched device mmc1:0001 with driver mmcblk
[ 1.272338] bus: 'mmc': really_probe: probing driver mmcblk with device mmc1:0001
[ 1.272430] device: 'mmc1:0001:1': device_add
[ 1.272460] bus: 'sdio': add device mmc1:0001:1
[ 1.272552] PM: Adding info for sdio:mmc1:0001:1
[ 1.272644] bus: 'sdio': driver_probe_device: matched device mmc1:0001:1 with driver wl1271_sdio
[ 1.272674] bus: 'sdio': really_probe: probing driver wl1271_sdio with device mmc1:0001:1
[ 1.272705] AIRVOD sdio_bus_probe drivers/mmc/core/sdio_bus.c
[ 1.279754] device: 'mmc1:0001:2': device_add
[ 1.279785] bus: 'sdio': add device mmc1:0001:2
[ 1.279907] PM: Adding info for sdio:mmc1:0001:2
[ 1.279968] bus: 'sdio': driver_probe_device: matched device mmc1:0001:2 with driver wl1271_sdio
[ 1.279998] bus: 'sdio': really_probe: probing driver wl1271_sdio with device mmc1:0001:2
[ 1.280029] AIRVOD sdio_bus_probe drivers/mmc/core/sdio_bus.c
[ 1.287994] Registering platform device 'wl1271'. Parent at platform
[ 1.287994] device: 'wl1271': device_add
[ 1.288055] bus: 'platform': add device wl1271
[ 1.288177] PM: Adding info for platform:wl1271
[ 1.288330] device: 'phy0': device_add
[ 1.288452] PM: Adding info for No Bus:phy0
[ 1.288635] device: 'rfkill0': device_add
[ 1.288757] PM: Adding info for No Bus:rfkill0
[ 1.291503] device: 'wlan0': device_add
[ 1.291931] PM: Adding info for No Bus:wlan0
[ 1.294006] wl1271: loaded
[ 1.296844] wl1271: initialized
[ 1.300262] driver: 'mmc1:0001:2': driver_bound: bound to device 'wl1271_sdio'
[ 1.300262] bus: 'sdio': really_probe: bound device mmc1:0001:2 to driver wl1271_sdio
[ 1.743377] AIRVOD __dev_change_flags net/core/dev.c ret = 0
[ 1.749908] ARIVOD eth_validate_addr net/ethernet/eth.c
[ 1.755676] AIRVOD __dev_change_flags net/core/dev.c ret = 0
[ 1.761993] ARIVOD eth_validate_addr net/ethernet/eth.c
[ 1.767700] AIRVOD __dev_change_flags net/core/dev.c ret = 0
[ 1.773956] ARIVOD eth_validate_addr net/ethernet/eth.c
[ 1.790283] net eth0: SMSC911x/921x identified at 0xc600c000, IRQ: 336
[ 1.797210] AIRVOD __dev_change_flags net/core/dev.c ret = 0
[ 1.803558] wl1271: mac80211 start
[ 1.803588] wl1271: mac80211 add interface type 2 mac 12:34:56:78:ab:cd
[ 2.040649] chip id 0x4030111 (1271 PG20)
[ 2.282836] chip id 0x4030111 (1271 PG20)
[ 2.287872] wl1271: pause1 0xf03
[ 2.288818] wl1271: DRPW_SCRATCH_START 0031002c
[ 2.288879] wl1271: clk2 0x0
[ 2.289398] wl1271: soft reset bootdata 0x0
[ 2.289520] wl1271: nvs burst write 0x30546c: 0x5678abcd
[ 2.289581] wl1271: nvs burst write 0x305470: 0x1234
[ 2.290283] wl1271: ACX_EEPROMLESS_IND_REG
[ 2.290435] wl1271: chip id 0x4030111
[ 2.290802] wl1271: firmware chunks to be uploaded: 6
[ 2.290832] wl1271: chunk 5 addr 0x0 len 195924
[ 2.290832] wl1271: starting firmware upload
[ 2.290863] wl1271: fw_data_len 195924 chunk_size 512
[ 2.291198] wl1271: uploading fw chunk 0xc600f00c to 0x0
[ 2.291625] wl1271: uploading fw chunk 0xc600f20c to 0x200
[ 2.292022] wl1271: uploading fw chunk 0xc600f40c to 0x400
[ 2.292419] wl1271: uploading fw chunk 0xc600f60c to 0x600
[ 2.292816] wl1271: uploading fw chunk 0xc600f80c to 0x800
[ 2.293243] wl1271: uploading fw chunk 0xc600fa0c to 0xa00
[ 2.293640] wl1271: uploading fw chunk 0xc600fc0c to 0xc00
[ 2.294036] wl1271: uploading fw chunk 0xc600fe0c to 0xe00
[ 2.294464] wl1271: uploading fw chunk 0xc601000c to 0x1000
[ 2.294860] wl1271: uploading fw chunk 0xc601020c to 0x1200
[ 2.295257] wl1271: uploading fw chunk 0xc601040c to 0x1400
[ 2.295654] wl1271: uploading fw chunk 0xc601060c to 0x1600
[ 2.296081] wl1271: uploading fw chunk 0xc601080c to 0x1800
[ 2.296478] wl1271: uploading fw chunk 0xc6010a0c to 0x1a00
[ 2.296875] wl1271: uploading fw chunk 0xc6010c0c to 0x1c00
[ 2.297271] wl1271: uploading fw chunk 0xc6010e0c to 0x1e00
[ 2.297698] wl1271: uploading fw chunk 0xc601100c to 0x2000
[ 2.298065] wl1271: uploading fw chunk 0xc601120c to 0x2200
[ 2.298461] wl1271: uploading fw chunk 0xc601140c to 0x2400
[ 2.298858] wl1271: uploading fw chunk 0xc601160c to 0x2600
[ 2.299285] wl1271: uploading fw chunk 0xc601180c to 0x2800
[ 2.299682] wl1271: uploading fw chunk 0xc6011a0c to 0x2a00
[ 2.300079] wl1271: uploading fw chunk 0xc6011c0c to 0x2c00
[ 2.300476] wl1271: uploading fw chunk 0xc6011e0c to 0x2e00
[ 2.300903] wl1271: uploading fw chunk 0xc601200c to 0x3000
[ 2.301300] wl1271: uploading fw chunk 0xc601220c to 0x3200
[ 2.301696] wl1271: uploading fw chunk 0xc601240c to 0x3400
[ 2.302093] wl1271: uploading fw chunk 0xc601260c to 0x3600
[ 2.302520] wl1271: uploading fw chunk 0xc601280c to 0x3800
[ 2.302917] wl1271: uploading fw chunk 0xc6012a0c to 0x3a00
[ 2.303314] wl1271: uploading fw chunk 0xc6012c0c to 0x3c00
[ 2.303741] wl1271: uploading fw chunk 0xc6012e0c to 0x3e00
[ 2.304138] wl1271: uploading fw chunk 0xc601300c to 0x4000
[ 2.304534] wl1271: uploading fw chunk 0xc601320c to 0x4200
[ 2.304931] wl1271: uploading fw chunk 0xc601340c to 0x4400
[ 2.305358] wl1271: uploading fw chunk 0xc601360c to 0x4600
[ 2.305755] wl1271: uploading fw chunk 0xc601380c to 0x4800
[ 2.306152] wl1271: uploading fw chunk 0xc6013a0c to 0x4a00
[ 2.306579] wl1271: uploading fw chunk 0xc6013c0c to 0x4c00
[ 2.306976] wl1271: uploading fw chunk 0xc6013e0c to 0x4e00
[ 2.307373] wl1271: uploading fw chunk 0xc601400c to 0x5000
[ 2.307800] wl1271: uploading fw chunk 0xc601420c to 0x5200
[ 2.308197] wl1271: uploading fw chunk 0xc601440c to 0x5400
[ 2.308593] wl1271: uploading fw chunk 0xc601460c to 0x5600
[ 2.308990] wl1271: uploading fw chunk 0xc601480c to 0x5800
[ 2.309417] wl1271: uploading fw chunk 0xc6014a0c to 0x5a00
[ 2.309814] wl1271: uploading fw chunk 0xc6014c0c to 0x5c00
[ 2.310211] wl1271: uploading fw chunk 0xc6014e0c to 0x5e00
[ 2.310607] wl1271: uploading fw chunk 0xc601500c to 0x6000
[ 2.311035] wl1271: uploading fw chunk 0xc601520c to 0x6200
[ 2.311431] wl1271: uploading fw chunk 0xc601540c to 0x6400
[ 2.311828] wl1271: uploading fw chunk 0xc601560c to 0x6600
[ 2.312255] wl1271: uploading fw chunk 0xc601580c to 0x6800
[ 2.312652] wl1271: uploading fw chunk 0xc6015a0c to 0x6a00
[ 2.313049] wl1271: uploading fw chunk 0xc6015c0c to 0x6c00
[ 2.313476] wl1271: uploading fw chunk 0xc6015e0c to 0x6e00
[ 2.313873] wl1271: uploading fw chunk 0xc601600c to 0x7000
[ 2.314270] wl1271: uploading fw chunk 0xc601620c to 0x7200
[ 2.314666] wl1271: uploading fw chunk 0xc601640c to 0x7400
[ 2.315093] wl1271: uploading fw chunk 0xc601660c to 0x7600
[ 2.315490] wl1271: uploading fw chunk 0xc601680c to 0x7800
[ 2.315887] wl1271: uploading fw chunk 0xc6016a0c to 0x7a00
[ 2.316284] wl1271: uploading fw chunk 0xc6016c0c to 0x7c00
[ 2.316711] wl1271: uploading fw chunk 0xc6016e0c to 0x7e00
[ 2.317108] wl1271: uploading fw chunk 0xc601700c to 0x8000
[ 2.317504] wl1271: uploading fw chunk 0xc601720c to 0x8200
[ 2.317932] wl1271: uploading fw chunk 0xc601740c to 0x8400
[ 2.318328] wl1271: uploading fw chunk 0xc601760c to 0x8600
[ 2.318725] wl1271: uploading fw chunk 0xc601780c to 0x8800
[ 2.319122] wl1271: uploading fw chunk 0xc6017a0c to 0x8a00
[ 2.319549] wl1271: uploading fw chunk 0xc6017c0c to 0x8c00
[ 2.319946] wl1271: uploading fw chunk 0xc6017e0c to 0x8e00
[ 2.320343] wl1271: uploading fw chunk 0xc601800c to 0x9000
[ 2.320739] wl1271: uploading fw chunk 0xc601820c to 0x9200
[ 2.321166] wl1271: uploading fw chunk 0xc601840c to 0x9400
[ 2.321533] wl1271: uploading fw chunk 0xc601860c to 0x9600
[ 2.321929] wl1271: uploading fw chunk 0xc601880c to 0x9800
[ 2.322326] wl1271: uploading fw chunk 0xc6018a0c to 0x9a00
[ 2.322723] wl1271: uploading fw chunk 0xc6018c0c to 0x9c00
[ 2.323150] wl1271: uploading fw chunk 0xc6018e0c to 0x9e00
[ 2.323547] wl1271: uploading fw chunk 0xc601900c to 0xa000
[ 2.323944] wl1271: uploading fw chunk 0xc601920c to 0xa200
[ 2.324371] wl1271: uploading fw chunk 0xc601940c to 0xa400
[ 2.324768] wl1271: uploading fw chunk 0xc601960c to 0xa600
[ 2.325164] wl1271: uploading fw chunk 0xc601980c to 0xa800
[ 2.325561] wl1271: uploading fw chunk 0xc6019a0c to 0xaa00
[ 2.325988] wl1271: uploading fw chunk 0xc6019c0c to 0xac00
[ 2.326385] wl1271: uploading fw chunk 0xc6019e0c to 0xae00
[ 2.326782] wl1271: uploading fw chunk 0xc601a00c to 0xb000
[ 2.327209] wl1271: uploading fw chunk 0xc601a20c to 0xb200
[ 2.327606] wl1271: uploading fw chunk 0xc601a40c to 0xb400
[ 2.328002] wl1271: uploading fw chunk 0xc601a60c to 0xb600
[ 2.328399] wl1271: uploading fw chunk 0xc601a80c to 0xb800
[ 2.328826] wl1271: uploading fw chunk 0xc601aa0c to 0xba00
[ 2.329223] wl1271: uploading fw chunk 0xc601ac0c to 0xbc00
[ 2.329620] wl1271: uploading fw chunk 0xc601ae0c to 0xbe00
[ 2.330047] wl1271: uploading fw chunk 0xc601b00c to 0xc000
[ 2.330444] wl1271: uploading fw chunk 0xc601b20c to 0xc200
[ 2.330841] wl1271: uploading fw chunk 0xc601b40c to 0xc400
[ 2.331237] wl1271: uploading fw chunk 0xc601b60c to 0xc600
[ 2.331665] wl1271: uploading fw chunk 0xc601b80c to 0xc800
[ 2.332061] wl1271: uploading fw chunk 0xc601ba0c to 0xca00
[ 2.332458] wl1271: uploading fw chunk 0xc601bc0c to 0xcc00
[ 2.332855] wl1271: uploading fw chunk 0xc601be0c to 0xce00
[ 2.333282] wl1271: uploading fw chunk 0xc601c00c to 0xd000
[ 2.333679] wl1271: uploading fw chunk 0xc601c20c to 0xd200
[ 2.334075] wl1271: uploading fw chunk 0xc601c40c to 0xd400
[ 2.334503] wl1271: uploading fw chunk 0xc601c60c to 0xd600
[ 2.334899] wl1271: uploading fw chunk 0xc601c80c to 0xd800
[ 2.335296] wl1271: uploading fw chunk 0xc601ca0c to 0xda00
[ 2.335693] wl1271: uploading fw chunk 0xc601cc0c to 0xdc00
[ 2.336120] wl1271: uploading fw chunk 0xc601ce0c to 0xde00
[ 2.336517] wl1271: uploading fw chunk 0xc601d00c to 0xe000
[ 2.336944] wl1271: uploading fw chunk 0xc601d20c to 0xe200
[ 2.337341] wl1271: uploading fw chunk 0xc601d40c to 0xe400
[ 2.337738] wl1271: uploading fw chunk 0xc601d60c to 0xe600
[ 2.338134] wl1271: uploading fw chunk 0xc601d80c to 0xe800
[ 2.338562] wl1271: uploading fw chunk 0xc601da0c to 0xea00
[ 2.338958] wl1271: uploading fw chunk 0xc601dc0c to 0xec00
[ 2.339355] wl1271: uploading fw chunk 0xc601de0c to 0xee00
[ 2.339782] wl1271: uploading fw chunk 0xc601e00c to 0xf000
[ 2.340179] wl1271: uploading fw chunk 0xc601e20c to 0xf200
[ 2.340576] wl1271: uploading fw chunk 0xc601e40c to 0xf400
[ 2.340972] wl1271: uploading fw chunk 0xc601e60c to 0xf600
[ 2.341400] wl1271: uploading fw chunk 0xc601e80c to 0xf800
[ 2.341796] wl1271: uploading fw chunk 0xc601ea0c to 0xfa00
[ 2.342193] wl1271: uploading fw chunk 0xc601ec0c to 0xfc00
[ 2.342590] wl1271: uploading fw chunk 0xc601ee0c to 0xfe00
[ 2.343017] wl1271: uploading fw chunk 0xc601f00c to 0x10000
[ 2.343414] wl1271: uploading fw chunk 0xc601f20c to 0x10200
[ 2.343811] wl1271: uploading fw chunk 0xc601f40c to 0x10400
[ 2.344207] wl1271: uploading fw chunk 0xc601f60c to 0x10600
[ 2.344635] wl1271: uploading fw chunk 0xc601f80c to 0x10800
[ 2.345031] wl1271: uploading fw chunk 0xc601fa0c to 0x10a00
[ 2.345458] wl1271: uploading fw chunk 0xc601fc0c to 0x10c00
[ 2.345855] wl1271: uploading fw chunk 0xc601fe0c to 0x10e00
[ 2.346252] wl1271: uploading fw chunk 0xc602000c to 0x11000
[ 2.346649] wl1271: uploading fw chunk 0xc602020c to 0x11200
[ 2.347076] wl1271: uploading fw chunk 0xc602040c to 0x11400
[ 2.347473] wl1271: uploading fw chunk 0xc602060c to 0x11600
[ 2.347869] wl1271: uploading fw chunk 0xc602080c to 0x11800
[ 2.348266] wl1271: uploading fw chunk 0xc6020a0c to 0x11a00
[ 2.348693] wl1271: uploading fw chunk 0xc6020c0c to 0x11c00
[ 2.349090] wl1271: uploading fw chunk 0xc6020e0c to 0x11e00
[ 2.349487] wl1271: uploading fw chunk 0xc602100c to 0x12000
[ 2.349914] wl1271: uploading fw chunk 0xc602120c to 0x12200
[ 2.350311] wl1271: uploading fw chunk 0xc602140c to 0x12400
[ 2.350708] wl1271: uploading fw chunk 0xc602160c to 0x12600
[ 2.351104] wl1271: uploading fw chunk 0xc602180c to 0x12800
[ 2.351531] wl1271: uploading fw chunk 0xc6021a0c to 0x12a00
[ 2.351928] wl1271: uploading fw chunk 0xc6021c0c to 0x12c00
[ 2.352325] wl1271: uploading fw chunk 0xc6021e0c to 0x12e00
[ 2.352752] wl1271: uploading fw chunk 0xc602200c to 0x13000
[ 2.353149] wl1271: uploading fw chunk 0xc602220c to 0x13200
[ 2.353546] wl1271: uploading fw chunk 0xc602240c to 0x13400
[ 2.353973] wl1271: uploading fw chunk 0xc602260c to 0x13600
[ 2.354370] wl1271: uploading fw chunk 0xc602280c to 0x13800
[ 2.354766] wl1271: uploading fw chunk 0xc6022a0c to 0x13a00
[ 2.355163] wl1271: uploading fw chunk 0xc6022c0c to 0x13c00
[ 2.355590] wl1271: uploading fw chunk 0xc6022e0c to 0x13e00
[ 2.355987] wl1271: uploading fw chunk 0xc602300c to 0x14000
[ 2.356384] wl1271: uploading fw chunk 0xc602320c to 0x14200
[ 2.356781] wl1271: uploading fw chunk 0xc602340c to 0x14400
[ 2.357208] wl1271: uploading fw chunk 0xc602360c to 0x14600
[ 2.357604] wl1271: uploading fw chunk 0xc602380c to 0x14800
[ 2.358001] wl1271: uploading fw chunk 0xc6023a0c to 0x14a00
[ 2.358428] wl1271: uploading fw chunk 0xc6023c0c to 0x14c00
[ 2.358825] wl1271: uploading fw chunk 0xc6023e0c to 0x14e00
[ 2.359222] wl1271: uploading fw chunk 0xc602400c to 0x15000
[ 2.359619] wl1271: uploading fw chunk 0xc602420c to 0x15200
[ 2.360046] wl1271: uploading fw chunk 0xc602440c to 0x15400
[ 2.360443] wl1271: uploading fw chunk 0xc602460c to 0x15600
[ 2.360839] wl1271: uploading fw chunk 0xc602480c to 0x15800
[ 2.361267] wl1271: uploading fw chunk 0xc6024a0c to 0x15a00
[ 2.361663] wl1271: uploading fw chunk 0xc6024c0c to 0x15c00
[ 2.362060] wl1271: uploading fw chunk 0xc6024e0c to 0x15e00
[ 2.362487] wl1271: uploading fw chunk 0xc602500c to 0x16000
[ 2.362884] wl1271: uploading fw chunk 0xc602520c to 0x16200
[ 2.363281] wl1271: uploading fw chunk 0xc602540c to 0x16400
[ 2.363677] wl1271: uploading fw chunk 0xc602560c to 0x16600
[ 2.364105] wl1271: uploading fw chunk 0xc602580c to 0x16800
[ 2.364501] wl1271: uploading fw chunk 0xc6025a0c to 0x16a00
[ 2.364898] wl1271: uploading fw chunk 0xc6025c0c to 0x16c00
[ 2.365325] wl1271: uploading fw chunk 0xc6025e0c to 0x16e00
[ 2.365722] wl1271: uploading fw chunk 0xc602600c to 0x17000
[ 2.366119] wl1271: uploading fw chunk 0xc602620c to 0x17200
[ 2.366851] wl1271: uploading fw chunk 0xc602640c to 0x17400
[ 2.367248] wl1271: uploading fw chunk 0xc602660c to 0x17600
[ 2.367675] wl1271: uploading fw chunk 0xc602680c to 0x17800
[ 2.368072] wl1271: uploading fw chunk 0xc6026a0c to 0x17a00
[ 2.368499] wl1271: uploading fw chunk 0xc6026c0c to 0x17c00
[ 2.368896] wl1271: uploading fw chunk 0xc6026e0c to 0x17e00
[ 2.369293] wl1271: uploading fw chunk 0xc602700c to 0x18000
[ 2.369689] wl1271: uploading fw chunk 0xc602720c to 0x18200
[ 2.370117] wl1271: uploading fw chunk 0xc602740c to 0x18400
[ 2.370513] wl1271: uploading fw chunk 0xc602760c to 0x18600
[ 2.370910] wl1271: uploading fw chunk 0xc602780c to 0x18800
[ 2.371307] wl1271: uploading fw chunk 0xc6027a0c to 0x18a00
[ 2.371734] wl1271: uploading fw chunk 0xc6027c0c to 0x18c00
[ 2.372131] wl1271: uploading fw chunk 0xc6027e0c to 0x18e00
[ 2.372528] wl1271: uploading fw chunk 0xc602800c to 0x19000
[ 2.372955] wl1271: uploading fw chunk 0xc602820c to 0x19200
[ 2.373352] wl1271: uploading fw chunk 0xc602840c to 0x19400
[ 2.373748] wl1271: uploading fw chunk 0xc602860c to 0x19600
[ 2.374145] wl1271: uploading fw chunk 0xc602880c to 0x19800
[ 2.374572] wl1271: uploading fw chunk 0xc6028a0c to 0x19a00
[ 2.374969] wl1271: uploading fw chunk 0xc6028c0c to 0x19c00
[ 2.375366] wl1271: uploading fw chunk 0xc6028e0c to 0x19e00
[ 2.375762] wl1271: uploading fw chunk 0xc602900c to 0x1a000
[ 2.376129] wl1271: uploading fw chunk 0xc602920c to 0x1a200
[ 2.376495] wl1271: uploading fw chunk 0xc602940c to 0x1a400
[ 2.376892] wl1271: uploading fw chunk 0xc602960c to 0x1a600
[ 2.377288] wl1271: uploading fw chunk 0xc602980c to 0x1a800
[ 2.377685] wl1271: uploading fw chunk 0xc6029a0c to 0x1aa00
[ 2.378051] wl1271: uploading fw chunk 0xc6029c0c to 0x1ac00
[ 2.378448] wl1271: uploading fw chunk 0xc6029e0c to 0x1ae00
[ 2.378845] wl1271: uploading fw chunk 0xc602a00c to 0x1b000
[ 2.379211] wl1271: uploading fw chunk 0xc602a20c to 0x1b200
[ 2.379608] wl1271: uploading fw chunk 0xc602a40c to 0x1b400
[ 2.380004] wl1271: uploading fw chunk 0xc602a60c to 0x1b600
[ 2.380401] wl1271: uploading fw chunk 0xc602a80c to 0x1b800
[ 2.380767] wl1271: uploading fw chunk 0xc602aa0c to 0x1ba00
[ 2.381164] wl1271: uploading fw chunk 0xc602ac0c to 0x1bc00
[ 2.381561] wl1271: uploading fw chunk 0xc602ae0c to 0x1be00
[ 2.381927] wl1271: uploading fw chunk 0xc602b00c to 0x1c000
[ 2.382324] wl1271: uploading fw chunk 0xc602b20c to 0x1c200
[ 2.382720] wl1271: uploading fw chunk 0xc602b40c to 0x1c400
[ 2.383087] wl1271: uploading fw chunk 0xc602b60c to 0x1c600
[ 2.383483] wl1271: uploading fw chunk 0xc602b80c to 0x1c800
[ 2.383941] wl1271: uploading fw chunk 0xc602ba0c to 0x1ca00
[ 2.384368] wl1271: uploading fw chunk 0xc602bc0c to 0x1cc00
[ 2.384765] wl1271: uploading fw chunk 0xc602be0c to 0x1ce00
[ 2.385162] wl1271: uploading fw chunk 0xc602c00c to 0x1d000
[ 2.385589] wl1271: uploading fw chunk 0xc602c20c to 0x1d200
[ 2.385986] wl1271: uploading fw chunk 0xc602c40c to 0x1d400
[ 2.386383] wl1271: uploading fw chunk 0xc602c60c to 0x1d600
[ 2.386779] wl1271: uploading fw chunk 0xc602c80c to 0x1d800
[ 2.387207] wl1271: uploading fw chunk 0xc602ca0c to 0x1da00
[ 2.387603] wl1271: uploading fw chunk 0xc602cc0c to 0x1dc00
[ 2.388000] wl1271: uploading fw chunk 0xc602ce0c to 0x1de00
[ 2.388427] wl1271: uploading fw chunk 0xc602d00c to 0x1e000
[ 2.388824] wl1271: uploading fw chunk 0xc602d20c to 0x1e200
[ 2.389221] wl1271: uploading fw chunk 0xc602d40c to 0x1e400
[ 2.389617] wl1271: uploading fw chunk 0xc602d60c to 0x1e600
[ 2.390045] wl1271: uploading fw chunk 0xc602d80c to 0x1e800
[ 2.390441] wl1271: uploading fw chunk 0xc602da0c to 0x1ea00
[ 2.390838] wl1271: uploading fw chunk 0xc602dc0c to 0x1ec00
[ 2.391235] wl1271: uploading fw chunk 0xc602de0c to 0x1ee00
[ 2.391662] wl1271: uploading fw chunk 0xc602e00c to 0x1f000
[ 2.392059] wl1271: uploading fw chunk 0xc602e20c to 0x1f200
[ 2.392486] wl1271: uploading fw chunk 0xc602e40c to 0x1f400
[ 2.392883] wl1271: uploading fw chunk 0xc602e60c to 0x1f600
[ 2.393280] wl1271: uploading fw chunk 0xc602e80c to 0x1f800
[ 2.393676] wl1271: uploading fw chunk 0xc602ea0c to 0x1fa00
[ 2.394104] wl1271: uploading fw chunk 0xc602ec0c to 0x1fc00
[ 2.394500] wl1271: uploading fw chunk 0xc602ee0c to 0x1fe00
[ 2.394897] wl1271: uploading fw chunk 0xc602f00c to 0x20000
[ 2.395324] wl1271: uploading fw chunk 0xc602f20c to 0x20200
[ 2.395721] wl1271: uploading fw chunk 0xc602f40c to 0x20400
[ 2.396118] wl1271: uploading fw chunk 0xc602f60c to 0x20600
[ 2.396514] wl1271: uploading fw chunk 0xc602f80c to 0x20800
[ 2.396942] wl1271: uploading fw chunk 0xc602fa0c to 0x20a00
[ 2.397338] wl1271: uploading fw chunk 0xc602fc0c to 0x20c00
[ 2.397735] wl1271: uploading fw chunk 0xc602fe0c to 0x20e00
[ 2.398132] wl1271: uploading fw chunk 0xc603000c to 0x21000
[ 2.398559] wl1271: uploading fw chunk 0xc603020c to 0x21200
[ 2.398956] wl1271: uploading fw chunk 0xc603040c to 0x21400
[ 2.399353] wl1271: uploading fw chunk 0xc603060c to 0x21600
[ 2.399780] wl1271: uploading fw chunk 0xc603080c to 0x21800
[ 2.400177] wl1271: uploading fw chunk 0xc6030a0c to 0x21a00
[ 2.400573] wl1271: uploading fw chunk 0xc6030c0c to 0x21c00
[ 2.401000] wl1271: uploading fw chunk 0xc6030e0c to 0x21e00
[ 2.401397] wl1271: uploading fw chunk 0xc603100c to 0x22000
[ 2.401794] wl1271: uploading fw chunk 0xc603120c to 0x22200
[ 2.402221] wl1271: uploading fw chunk 0xc603140c to 0x22400
[ 2.402618] wl1271: uploading fw chunk 0xc603160c to 0x22600
[ 2.403015] wl1271: uploading fw chunk 0xc603180c to 0x22800
[ 2.403411] wl1271: uploading fw chunk 0xc6031a0c to 0x22a00
[ 2.403839] wl1271: uploading fw chunk 0xc6031c0c to 0x22c00
[ 2.404235] wl1271: uploading fw chunk 0xc6031e0c to 0x22e00
[ 2.404632] wl1271: uploading fw chunk 0xc603200c to 0x23000
[ 2.405059] wl1271: uploading fw chunk 0xc603220c to 0x23200
[ 2.405456] wl1271: uploading fw chunk 0xc603240c to 0x23400
[ 2.405853] wl1271: uploading fw chunk 0xc603260c to 0x23600
[ 2.406280] wl1271: uploading fw chunk 0xc603280c to 0x23800
[ 2.406677] wl1271: uploading fw chunk 0xc6032a0c to 0x23a00
[ 2.407073] wl1271: uploading fw chunk 0xc6032c0c to 0x23c00
[ 2.407440] wl1271: uploading fw chunk 0xc6032e0c to 0x23e00
[ 2.407836] wl1271: uploading fw chunk 0xc603300c to 0x24000
[ 2.408233] wl1271: uploading fw chunk 0xc603320c to 0x24200
[ 2.408660] wl1271: uploading fw chunk 0xc603340c to 0x24400
[ 2.409057] wl1271: uploading fw chunk 0xc603360c to 0x24600
[ 2.409454] wl1271: uploading fw chunk 0xc603380c to 0x24800
[ 2.409851] wl1271: uploading fw chunk 0xc6033a0c to 0x24a00
[ 2.410278] wl1271: uploading fw chunk 0xc6033c0c to 0x24c00
[ 2.410675] wl1271: uploading fw chunk 0xc6033e0c to 0x24e00
[ 2.411071] wl1271: uploading fw chunk 0xc603400c to 0x25000
[ 2.411499] wl1271: uploading fw chunk 0xc603420c to 0x25200
[ 2.411895] wl1271: uploading fw chunk 0xc603440c to 0x25400
[ 2.412292] wl1271: uploading fw chunk 0xc603460c to 0x25600
[ 2.412689] wl1271: uploading fw chunk 0xc603480c to 0x25800
[ 2.413116] wl1271: uploading fw chunk 0xc6034a0c to 0x25a00
[ 2.413513] wl1271: uploading fw chunk 0xc6034c0c to 0x25c00
[ 2.413909] wl1271: uploading fw chunk 0xc6034e0c to 0x25e00
[ 2.414306] wl1271: uploading fw chunk 0xc603500c to 0x26000
[ 2.414733] wl1271: uploading fw chunk 0xc603520c to 0x26200
[ 2.415130] wl1271: uploading fw chunk 0xc603540c to 0x26400
[ 2.415557] wl1271: uploading fw chunk 0xc603560c to 0x26600
[ 2.415954] wl1271: uploading fw chunk 0xc603580c to 0x26800
[ 2.416351] wl1271: uploading fw chunk 0xc6035a0c to 0x26a00
[ 2.416748] wl1271: uploading fw chunk 0xc6035c0c to 0x26c00
[ 2.417175] wl1271: uploading fw chunk 0xc6035e0c to 0x26e00
[ 2.417572] wl1271: uploading fw chunk 0xc603600c to 0x27000
[ 2.417968] wl1271: uploading fw chunk 0xc603620c to 0x27200
[ 2.418365] wl1271: uploading fw chunk 0xc603640c to 0x27400
[ 2.418792] wl1271: uploading fw chunk 0xc603660c to 0x27600
[ 2.419189] wl1271: uploading fw chunk 0xc603680c to 0x27800
[ 2.419586] wl1271: uploading fw chunk 0xc6036a0c to 0x27a00
[ 2.419982] wl1271: uploading fw chunk 0xc6036c0c to 0x27c00
[ 2.420410] wl1271: uploading fw chunk 0xc6036e0c to 0x27e00
[ 2.420806] wl1271: uploading fw chunk 0xc603700c to 0x28000
[ 2.421203] wl1271: uploading fw chunk 0xc603720c to 0x28200
[ 2.421630] wl1271: uploading fw chunk 0xc603740c to 0x28400
[ 2.422027] wl1271: uploading fw chunk 0xc603760c to 0x28600
[ 2.422424] wl1271: uploading fw chunk 0xc603780c to 0x28800
[ 2.422851] wl1271: uploading fw chunk 0xc6037a0c to 0x28a00
[ 2.423248] wl1271: uploading fw chunk 0xc6037c0c to 0x28c00
[ 2.423645] wl1271: uploading fw chunk 0xc6037e0c to 0x28e00
[ 2.424072] wl1271: uploading fw chunk 0xc603800c to 0x29000
[ 2.424468] wl1271: uploading fw chunk 0xc603820c to 0x29200
[ 2.424865] wl1271: uploading fw chunk 0xc603840c to 0x29400
[ 2.425262] wl1271: uploading fw chunk 0xc603860c to 0x29600
[ 2.425689] wl1271: uploading fw chunk 0xc603880c to 0x29800
[ 2.426086] wl1271: uploading fw chunk 0xc6038a0c to 0x29a00
[ 2.426483] wl1271: uploading fw chunk 0xc6038c0c to 0x29c00
[ 2.426879] wl1271: uploading fw chunk 0xc6038e0c to 0x29e00
[ 2.427307] wl1271: uploading fw chunk 0xc603900c to 0x2a000
[ 2.427703] wl1271: uploading fw chunk 0xc603920c to 0x2a200
[ 2.428100] wl1271: uploading fw chunk 0xc603940c to 0x2a400
[ 2.428527] wl1271: uploading fw chunk 0xc603960c to 0x2a600
[ 2.428924] wl1271: uploading fw chunk 0xc603980c to 0x2a800
[ 2.429321] wl1271: uploading fw chunk 0xc6039a0c to 0x2aa00
[ 2.429748] wl1271: uploading fw chunk 0xc6039c0c to 0x2ac00
[ 2.430145] wl1271: uploading fw chunk 0xc6039e0c to 0x2ae00
[ 2.430603] wl1271: uploading fw chunk 0xc603a00c to 0x2b000
[ 2.430999] wl1271: uploading fw chunk 0xc603a20c to 0x2b200
[ 2.431396] wl1271: uploading fw chunk 0xc603a40c to 0x2b400
[ 2.431823] wl1271: uploading fw chunk 0xc603a60c to 0x2b600
[ 2.432220] wl1271: uploading fw chunk 0xc603a80c to 0x2b800
[ 2.432617] wl1271: uploading fw chunk 0xc603aa0c to 0x2ba00
[ 2.433044] wl1271: uploading fw chunk 0xc603ac0c to 0x2bc00
[ 2.433441] wl1271: uploading fw chunk 0xc603ae0c to 0x2be00
[ 2.433837] wl1271: uploading fw chunk 0xc603b00c to 0x2c000
[ 2.434234] wl1271: uploading fw chunk 0xc603b20c to 0x2c200
[ 2.434661] wl1271: uploading fw chunk 0xc603b40c to 0x2c400
[ 2.435058] wl1271: uploading fw chunk 0xc603b60c to 0x2c600
[ 2.435455] wl1271: uploading fw chunk 0xc603b80c to 0x2c800
[ 2.435882] wl1271: uploading fw chunk 0xc603ba0c to 0x2ca00
[ 2.436279] wl1271: uploading fw chunk 0xc603bc0c to 0x2cc00
[ 2.436676] wl1271: uploading fw chunk 0xc603be0c to 0x2ce00
[ 2.437072] wl1271: uploading fw chunk 0xc603c00c to 0x2d000
[ 2.437500] wl1271: uploading fw chunk 0xc603c20c to 0x2d200
[ 2.437896] wl1271: uploading fw chunk 0xc603c40c to 0x2d400
[ 2.438293] wl1271: uploading fw chunk 0xc603c60c to 0x2d600
[ 2.438659] wl1271: uploading fw chunk 0xc603c80c to 0x2d800
[ 2.439056] wl1271: uploading fw chunk 0xc603ca0c to 0x2da00
[ 2.439453] wl1271: uploading fw chunk 0xc603cc0c to 0x2dc00
[ 2.439880] wl1271: uploading fw chunk 0xc603ce0c to 0x2de00
[ 2.440277] wl1271: uploading fw chunk 0xc603d00c to 0x2e000
[ 2.440673] wl1271: uploading fw chunk 0xc603d20c to 0x2e200
[ 2.441070] wl1271: uploading fw chunk 0xc603d40c to 0x2e400
[ 2.441497] wl1271: uploading fw chunk 0xc603d60c to 0x2e600
[ 2.442230] wl1271: uploading fw chunk 0xc603d80c to 0x2e800
[ 2.442626] wl1271: uploading fw chunk 0xc603da0c to 0x2ea00
[ 2.443023] wl1271: uploading fw chunk 0xc603dc0c to 0x2ec00
[ 2.443450] wl1271: uploading fw chunk 0xc603de0c to 0x2ee00
[ 2.443847] wl1271: uploading fw chunk 0xc603e00c to 0x2f000
[ 2.444244] wl1271: uploading fw chunk 0xc603e20c to 0x2f200
[ 2.444641] wl1271: uploading fw chunk 0xc603e40c to 0x2f400
[ 2.445068] wl1271: uploading fw chunk 0xc603e60c to 0x2f600
[ 2.445465] wl1271: uploading fw chunk 0xc603e80c to 0x2f800
[ 2.445861] wl1271: uploading fw chunk 0xc603ea0c to 0x2fa00
[ 2.446289] wl1271: uploading fw last chunk (340 B) 0xc603ec0c to 0x2fc00
[ 2.446624] wl1271: chunk 4 addr 0x20000000 len 47604
[ 2.446624] wl1271: starting firmware upload
[ 2.446655] wl1271: fw_data_len 47604 chunk_size 512
[ 2.447326] wl1271: uploading fw chunk 0xc603ed68 to 0x20000000
[ 2.448059] wl1271: uploading fw chunk 0xc603ef68 to 0x20000200
[ 2.448791] wl1271: uploading fw chunk 0xc603f168 to 0x20000400
[ 2.449523] wl1271: uploading fw chunk 0xc603f368 to 0x20000600
[ 2.450256] wl1271: uploading fw chunk 0xc603f568 to 0x20000800
[ 2.450988] wl1271: uploading fw chunk 0xc603f768 to 0x20000a00
[ 2.451721] wl1271: uploading fw chunk 0xc603f968 to 0x20000c00
[ 2.452453] wl1271: uploading fw chunk 0xc603fb68 to 0x20000e00
[ 2.453186] wl1271: uploading fw chunk 0xc603fd68 to 0x20001000
[ 2.453918] wl1271: uploading fw chunk 0xc603ff68 to 0x20001200
[ 2.454620] wl1271: uploading fw chunk 0xc6040168 to 0x20001400
[ 2.455352] wl1271: uploading fw chunk 0xc6040368 to 0x20001600
[ 2.456085] wl1271: uploading fw chunk 0xc6040568 to 0x20001800
[ 2.456817] wl1271: uploading fw chunk 0xc6040768 to 0x20001a00
[ 2.457550] wl1271: uploading fw chunk 0xc6040968 to 0x20001c00
[ 2.458282] wl1271: uploading fw chunk 0xc6040b68 to 0x20001e00
[ 2.459014] wl1271: uploading fw chunk 0xc6040d68 to 0x20002000
[ 2.459747] wl1271: uploading fw chunk 0xc6040f68 to 0x20002200
[ 2.460479] wl1271: uploading fw chunk 0xc6041168 to 0x20002400
[ 2.461212] wl1271: uploading fw chunk 0xc6041368 to 0x20002600
[ 2.462005] wl1271: uploading fw chunk 0xc6041568 to 0x20002800
[ 2.462738] wl1271: uploading fw chunk 0xc6041768 to 0x20002a00
[ 2.463470] wl1271: uploading fw chunk 0xc6041968 to 0x20002c00
[ 2.464202] wl1271: uploading fw chunk 0xc6041b68 to 0x20002e00
[ 2.464935] wl1271: uploading fw chunk 0xc6041d68 to 0x20003000
[ 2.465667] wl1271: uploading fw chunk 0xc6041f68 to 0x20003200
[ 2.466400] wl1271: uploading fw chunk 0xc6042168 to 0x20003400
[ 2.467132] wl1271: uploading fw chunk 0xc6042368 to 0x20003600
[ 2.467864] wl1271: uploading fw chunk 0xc6042568 to 0x20003800
[ 2.468597] wl1271: uploading fw chunk 0xc6042768 to 0x20003a00
[ 2.469329] wl1271: uploading fw chunk 0xc6042968 to 0x20003c00
[ 2.470062] wl1271: uploading fw chunk 0xc6042b68 to 0x20003e00
[ 2.470764] wl1271: uploading fw chunk 0xc6042d68 to 0x20004000
[ 2.471496] wl1271: uploading fw chunk 0xc6042f68 to 0x20004200
[ 2.472198] wl1271: uploading fw chunk 0xc6043168 to 0x20004400
[ 2.472900] wl1271: uploading fw chunk 0xc6043368 to 0x20004600
[ 2.473602] wl1271: uploading fw chunk 0xc6043568 to 0x20004800
[ 2.474334] wl1271: uploading fw chunk 0xc6043768 to 0x20004a00
[ 2.475036] wl1271: uploading fw chunk 0xc6043968 to 0x20004c00
[ 2.475769] wl1271: uploading fw chunk 0xc6043b68 to 0x20004e00
[ 2.476470] wl1271: uploading fw chunk 0xc6043d68 to 0x20005000
[ 2.477172] wl1271: uploading fw chunk 0xc6043f68 to 0x20005200
[ 2.477966] wl1271: uploading fw chunk 0xc6044168 to 0x20005400
[ 2.478698] wl1271: uploading fw chunk 0xc6044368 to 0x20005600
[ 2.479431] wl1271: uploading fw chunk 0xc6044568 to 0x20005800
[ 2.480163] wl1271: uploading fw chunk 0xc6044768 to 0x20005a00
[ 2.480895] wl1271: uploading fw chunk 0xc6044968 to 0x20005c00
[ 2.481628] wl1271: uploading fw chunk 0xc6044b68 to 0x20005e00
[ 2.482360] wl1271: uploading fw chunk 0xc6044d68 to 0x20006000
[ 2.483093] wl1271: uploading fw chunk 0xc6044f68 to 0x20006200
[ 2.483825] wl1271: uploading fw chunk 0xc6045168 to 0x20006400
[ 2.484558] wl1271: uploading fw chunk 0xc6045368 to 0x20006600
[ 2.485290] wl1271: uploading fw chunk 0xc6045568 to 0x20006800
[ 2.486083] wl1271: uploading fw chunk 0xc6045768 to 0x20006a00
[ 2.486816] wl1271: uploading fw chunk 0xc6045968 to 0x20006c00
[ 2.487548] wl1271: uploading fw chunk 0xc6045b68 to 0x20006e00
[ 2.488281] wl1271: uploading fw chunk 0xc6045d68 to 0x20007000
[ 2.489013] wl1271: uploading fw chunk 0xc6045f68 to 0x20007200
[ 2.489746] wl1271: uploading fw chunk 0xc6046168 to 0x20007400
[ 2.490478] wl1271: uploading fw chunk 0xc6046368 to 0x20007600
[ 2.491210] wl1271: uploading fw chunk 0xc6046568 to 0x20007800
[ 2.491943] wl1271: uploading fw chunk 0xc6046768 to 0x20007a00
[ 2.492675] wl1271: uploading fw chunk 0xc6046968 to 0x20007c00
[ 2.493408] wl1271: uploading fw chunk 0xc6046b68 to 0x20007e00
[ 2.494140] wl1271: uploading fw chunk 0xc6046d68 to 0x20008000
[ 2.494873] wl1271: uploading fw chunk 0xc6046f68 to 0x20008200
[ 2.495605] wl1271: uploading fw chunk 0xc6047168 to 0x20008400
[ 2.496337] wl1271: uploading fw chunk 0xc6047368 to 0x20008600
[ 2.497070] wl1271: uploading fw chunk 0xc6047568 to 0x20008800
[ 2.497802] wl1271: uploading fw chunk 0xc6047768 to 0x20008a00
[ 2.498535] wl1271: uploading fw chunk 0xc6047968 to 0x20008c00
[ 2.499267] wl1271: uploading fw chunk 0xc6047b68 to 0x20008e00
[ 2.500000] wl1271: uploading fw chunk 0xc6047d68 to 0x20009000
[ 2.500732] wl1271: uploading fw chunk 0xc6047f68 to 0x20009200
[ 2.501464] wl1271: uploading fw chunk 0xc6048168 to 0x20009400
[ 2.502197] wl1271: uploading fw chunk 0xc6048368 to 0x20009600
[ 2.502929] wl1271: uploading fw chunk 0xc6048568 to 0x20009800
[ 2.503662] wl1271: uploading fw chunk 0xc6048768 to 0x20009a00
[ 2.504394] wl1271: uploading fw chunk 0xc6048968 to 0x20009c00
[ 2.505126] wl1271: uploading fw chunk 0xc6048b68 to 0x20009e00
[ 2.505859] wl1271: uploading fw chunk 0xc6048d68 to 0x2000a000
[ 2.506591] wl1271: uploading fw chunk 0xc6048f68 to 0x2000a200
[ 2.507293] wl1271: uploading fw chunk 0xc6049168 to 0x2000a400
[ 2.508026] wl1271: uploading fw chunk 0xc6049368 to 0x2000a600
[ 2.508819] wl1271: uploading fw chunk 0xc6049568 to 0x2000a800
[ 2.509552] wl1271: uploading fw chunk 0xc6049768 to 0x2000aa00
[ 2.510284] wl1271: uploading fw chunk 0xc6049968 to 0x2000ac00
[ 2.511016] wl1271: uploading fw chunk 0xc6049b68 to 0x2000ae00
[ 2.511749] wl1271: uploading fw chunk 0xc6049d68 to 0x2000b000
[ 2.512481] wl1271: uploading fw chunk 0xc6049f68 to 0x2000b200
[ 2.513214] wl1271: uploading fw chunk 0xc604a168 to 0x2000b400
[ 2.513946] wl1271: uploading fw chunk 0xc604a368 to 0x2000b600
[ 2.514343] wl1271: uploading fw last chunk (500 B) 0xc604a568 to 0x2000b800
[ 2.514770] wl1271: chunk 3 addr 0x40000 len 448
[ 2.514770] wl1271: starting firmware upload
[ 2.514801] wl1271: fw_data_len 448 chunk_size 512
[ 2.515136] wl1271: uploading fw last chunk (448 B) 0xc604a764 to 0x40000
[ 2.515533] wl1271: chunk 2 addr 0x40be0 len 15988
[ 2.515533] wl1271: starting firmware upload
[ 2.515563] wl1271: fw_data_len 15988 chunk_size 512
[ 2.516235] wl1271: uploading fw chunk 0xc604a92c to 0x40be0
[ 2.516967] wl1271: uploading fw chunk 0xc604ab2c to 0x40de0
[ 2.517700] wl1271: uploading fw chunk 0xc604ad2c to 0x40fe0
[ 2.518432] wl1271: uploading fw chunk 0xc604af2c to 0x411e0
[ 2.519165] wl1271: uploading fw chunk 0xc604b12c to 0x413e0
[ 2.519897] wl1271: uploading fw chunk 0xc604b32c to 0x415e0
[ 2.520629] wl1271: uploading fw chunk 0xc604b52c to 0x417e0
[ 2.521362] wl1271: uploading fw chunk 0xc604b72c to 0x419e0
[ 2.522094] wl1271: uploading fw chunk 0xc604b92c to 0x41be0
[ 2.522827] wl1271: uploading fw chunk 0xc604bb2c to 0x41de0
[ 2.523559] wl1271: uploading fw chunk 0xc604bd2c to 0x41fe0
[ 2.524291] wl1271: uploading fw chunk 0xc604bf2c to 0x421e0
[ 2.525024] wl1271: uploading fw chunk 0xc604c12c to 0x423e0
[ 2.525756] wl1271: uploading fw chunk 0xc604c32c to 0x425e0
[ 2.526489] wl1271: uploading fw chunk 0xc604c52c to 0x427e0
[ 2.527221] wl1271: uploading fw chunk 0xc604c72c to 0x429e0
[ 2.527954] wl1271: uploading fw chunk 0xc604c92c to 0x42be0
[ 2.528656] wl1271: uploading fw chunk 0xc604cb2c to 0x42de0
[ 2.529388] wl1271: uploading fw chunk 0xc604cd2c to 0x42fe0
[ 2.530120] wl1271: uploading fw chunk 0xc604cf2c to 0x431e0
[ 2.530853] wl1271: uploading fw chunk 0xc604d12c to 0x433e0
[ 2.531585] wl1271: uploading fw chunk 0xc604d32c to 0x435e0
[ 2.532379] wl1271: uploading fw chunk 0xc604d52c to 0x437e0
[ 2.533111] wl1271: uploading fw chunk 0xc604d72c to 0x439e0
[ 2.533843] wl1271: uploading fw chunk 0xc604d92c to 0x43be0
[ 2.534576] wl1271: uploading fw chunk 0xc604db2c to 0x43de0
[ 2.535308] wl1271: uploading fw chunk 0xc604dd2c to 0x43fe0
[ 2.536041] wl1271: uploading fw chunk 0xc604df2c to 0x441e0
[ 2.536773] wl1271: uploading fw chunk 0xc604e12c to 0x443e0
[ 2.537506] wl1271: uploading fw chunk 0xc604e32c to 0x445e0
[ 2.538238] wl1271: uploading fw chunk 0xc604e52c to 0x447e0
[ 2.538635] wl1271: uploading fw last chunk (116 B) 0xc604e72c to 0x449e0
[ 2.538940] wl1271: chunk 1 addr 0x312000 len 7936
[ 2.538970] wl1271: starting firmware upload
[ 2.538970] wl1271: fw_data_len 7936 chunk_size 512
[ 2.539642] wl1271: uploading fw chunk 0xc604e7a8 to 0x312000
[ 2.540405] wl1271: uploading fw chunk 0xc604e9a8 to 0x312200
[ 2.541107] wl1271: uploading fw chunk 0xc604eba8 to 0x312400
[ 2.541839] wl1271: uploading fw chunk 0xc604eda8 to 0x312600
[ 2.542572] wl1271: uploading fw chunk 0xc604efa8 to 0x312800
[ 2.543304] wl1271: uploading fw chunk 0xc604f1a8 to 0x312a00
[ 2.544036] wl1271: uploading fw chunk 0xc604f3a8 to 0x312c00
[ 2.544769] wl1271: uploading fw chunk 0xc604f5a8 to 0x312e00
[ 2.545501] wl1271: uploading fw chunk 0xc604f7a8 to 0x313000
[ 2.546234] wl1271: uploading fw chunk 0xc604f9a8 to 0x313200
[ 2.546966] wl1271: uploading fw chunk 0xc604fba8 to 0x313400
[ 2.547698] wl1271: uploading fw chunk 0xc604fda8 to 0x313600
[ 2.548370] wl1271: uploading fw chunk 0xc604ffa8 to 0x313800
[ 2.549102] wl1271: uploading fw chunk 0xc60501a8 to 0x313a00
[ 2.549835] wl1271: uploading fw chunk 0xc60503a8 to 0x313c00
[ 2.550262] wl1271: uploading fw last chunk (256 B) 0xc60505a8 to 0x313e00
[ 2.550567] wl1271: chunk 0 addr 0x316000 len 3760
[ 2.550567] wl1271: starting firmware upload
[ 2.550567] wl1271: fw_data_len 3760 chunk_size 512
[ 2.551239] wl1271: uploading fw chunk 0xc60506b0 to 0x316000
[ 2.551971] wl1271: uploading fw chunk 0xc60508b0 to 0x316200
[ 2.552703] wl1271: uploading fw chunk 0xc6050ab0 to 0x316400
[ 2.553436] wl1271: uploading fw chunk 0xc6050cb0 to 0x316600
[ 2.554168] wl1271: uploading fw chunk 0xc6050eb0 to 0x316800
[ 2.554901] wl1271: uploading fw chunk 0xc60510b0 to 0x316a00
[ 2.555694] wl1271: uploading fw chunk 0xc60512b0 to 0x316c00
[ 2.556091] wl1271: uploading fw last chunk (176 B) 0xc60514b0 to 0x316e00
[ 2.556549] wl1271: chip id after firmware boot: 0x4030111
[ 2.576507] wl1271: cmd_box_addr 0x407b4 event_box_addr 0x4ce58
[ 2.576660] wl1271: acx event mbox mask
[ 2.576660] wl1271: cmd configure
[ 2.576995] MBOX ptrs: 0x4ce58 0x4ceac
[ 2.581146] MBOX ptrs: 0x4ce58 0x4ceac
[ 2.585083] wl1271: cmd test
[ 2.585479] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000000: 00 00 00 00 19 00 00 00 00 00 ec f6 00 0c 18 f8
[ 2.585510] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000010: fc 00 08 10 f0 f8 00 0a 14 00 00 00 00 00 00 00
[ 2.585540] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000020: 00 00 00 00 00 00 00 ee f4 f8 fe 05 ea f3 fa 01
[ 2.585571] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000030: 06 e5 f1 fa 02 07 d9 01 80 00 1d 1f 22 26 27 29
[ 2.585571] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000040: 1d 1f 22 26 27 27 16 1d 1e 20 24 25 50 50 50 50
[ 2.585601] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000050: 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
[ 2.585632] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000060: 50 50 50 50 50 50 50 50 01 02 02 02 02 00 15 15
[ 2.585662] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000070: 15 19 19 15 0e 1e 2d 00 9a 01 ae 01 c2 01 cc 01
[ 2.585662] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000080: db 01 db 01 d1 01 80 80 80 80 80 80 80 00 00 00
[ 2.585693] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 00000090: 00 00 00 00 1c 1e 21 23 25 50 18 1e 21 23 25 50
[ 2.585723] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 000000a0: 16 1c 1e 20 20 50 50 50 50 50 50 50 50 50 50 50
[ 2.585754] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 000000b0: 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
[ 2.585754] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 000000c0: 50 50 50 50 50 50 50 50 50 01 02 02 02 02 00 1a
[ 2.585784] wl1271: TEST_CMD_INI_FILE_RADIO_PARAM: 000000d0: 1a 1a 1a 1a 1a 10 10 10 10 10 10 10 1e 2d 00 00
[ 2.585815] wl1271: cmd test
[ 2.586303] wl1271: cmd template_set 2
[ 2.586791] wl1271: cmd template_set 0
[ 2.587219] wl1271: cmd template_set 6
[ 2.587707] wl1271: cmd template_set 5
[ 2.588226] wl1271: cmd template_set 4
[ 2.588714] wl1271: cmd template_set 1
[ 2.589202] wl1271: cmd template_set 7
[ 2.589691] wl1271: cmd template_set 7
[ 2.590179] wl1271: cmd template_set 7
[ 2.590698] wl1271: cmd template_set 7
[ 2.591186] wl1271: wl1271 mem cfg
[ 2.591186] wl1271: cmd configure
[ 2.591674] wl1271: acx mem map
[ 2.591705] wl1271: cmd interrogate
[ 2.592193] wl1271: available tx blocks: 83
[ 2.592193] wl1271: acx rx msdu life time
[ 2.592224] wl1271: cmd configure
[ 2.592468] wl1271: acx rx config
[ 2.592498] wl1271: cmd configure
[ 2.592742] wl1271: acx data pd threshold
[ 2.592742] wl1271: cmd configure
[ 2.593017] wl1271: acx slot
[ 2.593017] wl1271: cmd configure
[ 2.593261] wl1271: acx group address tbl
[ 2.593292] wl1271: cmd configure
[ 2.593627] wl1271: acx service period timeout
[ 2.593627] wl1271: cmd configure
[ 2.593902] wl1271: acx rts threshold
[ 2.593902] wl1271: cmd configure
[ 2.594146] wl1271: acx connection monitor parameters: disabled
[ 2.594177] wl1271: cmd configure
[ 2.594421] wl1271: acx beacon filter opt
[ 2.594451] wl1271: cmd configure
[ 2.594757] wl1271: acx beacon filter table
[ 2.594757] wl1271: cmd configure
[ 2.595092] wl1271: acx tx config options
[ 2.595123] wl1271: cmd configure
[ 2.595367] wl1271: wl1271 rx interrupt config
[ 2.595367] wl1271: cmd configure
[ 2.595642] wl1271: acx sg cfg
[ 2.595642] wl1271: cmd configure
[ 2.598236] wl1271: acx sg enable
[ 2.598236] wl1271: cmd configure
[ 2.598510] wl1271: acx cca threshold
[ 2.598510] wl1271: cmd configure
[ 2.598754] wl1271: acx bcn dtim options
[ 2.598785] wl1271: cmd configure
[ 2.599029] wl1271: acx frag threshold
[ 2.599060] wl1271: cmd configure
[ 2.599304] wl1271: acx tid config
[ 2.599334] wl1271: cmd configure
[ 2.599578] wl1271: acx tid config
[ 2.599578] wl1271: cmd configure
[ 2.599822] wl1271: acx tid config
[ 2.599853] wl1271: cmd configure
[ 2.600097] wl1271: acx tid config
[ 2.600128] wl1271: cmd configure
[ 2.600372] wl1271: acx tid config
[ 2.600372] wl1271: cmd configure
[ 2.600616] wl1271: acx tid config
[ 2.600646] wl1271: cmd configure
[ 2.600891] wl1271: acx tid config
[ 2.600921] wl1271: cmd configure
[ 2.601165] wl1271: acx ac cfg 0 cw_ming 15 cw_max 63 aifs 3 txop 0
[ 2.601196] wl1271: cmd configure
[ 2.601440] wl1271: acx ac cfg 1 cw_ming 15 cw_max 63 aifs 7 txop 0
[ 2.601470] wl1271: cmd configure
[ 2.601715] wl1271: acx ac cfg 2 cw_ming 15 cw_max 63 aifs 1 txop 3008
[ 2.601745] wl1271: cmd configure
[ 2.601989] wl1271: acx ac cfg 3 cw_ming 15 cw_max 63 aifs 1 txop 1504
[ 2.602020] wl1271: cmd configure
[ 2.602264] wl1271: acx rate policies
[ 2.602264] wl1271: cmd configure
[ 2.602630] wl1271: cmd data path
[ 2.602905] wl1271: rx start cmd channel 1
[ 2.603149] wl1271: tx start cmd channel 1
[ 2.603179] wl1271: acx sleep auth
[ 2.603179] wl1271: cmd configure
[ 2.603454] wl1271: acx feature cfg
[ 2.603454] wl1271: cmd configure
[ 2.603881] wl1271: cmd set_default_wep_key 0
[ 2.604370] wl1271: acx pm config
[ 2.604400] wl1271: cmd configure
[ 2.604827] wl1271: acx keep alive config
[ 2.604827] wl1271: cmd configure
[ 2.605255] wl1271: acx keep alive config
[ 2.605285] wl1271: cmd configure
[ 2.605712] wl1271: acx keep alive config
[ 2.605712] wl1271: cmd configure
[ 2.606140] wl1271: acx keep alive config
[ 2.606140] wl1271: cmd configure
[ 2.606567] wl1271: acx keep alive mode: 0
[ 2.606597] wl1271: cmd configure
[ 2.607025] wl1271: acx rssi snr avg weights
[ 2.607025] wl1271: cmd configure
[ 2.607452] wl1271: firmware booted (Rev 6.1.0.0.343)
[ 2.607482] wl1271: mac80211 bss info changed
[ 2.607482] wl1271: acx slot
[ 2.607513] wl1271: cmd configure
[ 2.607940] wl1271: acx_set_preamble
[ 2.607940] wl1271: cmd configure
[ 2.608367] wl1271: acx_set_ctsprotect
[ 2.608398] wl1271: cmd configure
[ 2.608825] phy0: device now idle
[ 2.608886] wl1271: mac80211 config ch 1 psm off power 20 idle
[ 2.608917] wl1271: flushing tx buffer: 0
[ 2.608917] wl1271: acx rate policies
[ 2.608947] wl1271: cmd configure
[ 2.609466] wl1271: acx rate policies
[ 2.609466] wl1271: cmd configure
[ 2.609954] wl1271: acx keep alive config
[ 2.609985] wl1271: cmd configure
[ 2.610473] wl1271: acx dot11_cur_tx_pwr
[ 2.610473] wl1271: cmd configure
[ 2.610931] wl1271: mac80211 conf tx 0
[ 2.610931] wl1271: acx ac cfg 3 cw_ming 7 cw_max 15 aifs 2 txop 3264
[ 2.610961] wl1271: cmd configure
[ 2.611389] wl1271: acx tid config
[ 2.611389] wl1271: cmd configure
[ 2.611816] wl1271: mac80211 conf tx 1
[ 2.611846] wl1271: acx ac cfg 2 cw_ming 15 cw_max 31 aifs 2 txop 6016
[ 2.611877] wl1271: cmd configure
[ 2.612274] wl1271: acx tid config
[ 2.612304] wl1271: cmd configure
[ 2.612731] wl1271: mac80211 conf tx 2
[ 2.612762] wl1271: acx ac cfg 0 cw_ming 31 cw_max 1023 aifs 3 txop 0
[ 2.612762] wl1271: cmd configure
[ 2.613189] wl1271: acx tid config
[ 2.613220] wl1271: cmd configure
[ 2.613647] wl1271: mac80211 conf tx 3
[ 2.613647] wl1271: acx ac cfg 1 cw_ming 31 cw_max 1023 aifs 7 txop 0
[ 2.613677] wl1271: cmd configure
[ 2.614105] wl1271: acx tid config
[ 2.614105] wl1271: cmd configure
[ 2.614532] wl1271: mac80211 bss info changed
[ 2.614593] wl1271: mac80211 configure filter
[ 2.614624] wl1271: acx group address tbl
[ 2.614624] wl1271: cmd configure
[ 2.615173] AIRVOD __dev_change_flags net/core/dev.c ret = 0
[ 2.621398] wl1271: elp work
[ 2.621398] wl1271: chip to elp
[ 2.621459] wl1271: mac80211 configure filter
[ 2.621490] wl1271: waking up chip from elp
[ 3.118377] wl1271: ERROR ELP wakeup timeout!
[ 3.122955] wl1271: mac80211 configure filter
[ 3.122985] wl1271: waking up chip from elp
[ 3.618469] wl1271: ERROR ELP wakeup timeout!
[ 3.626098] Sending DHCP requests .
[ 5.627655] DHCP/BOOTP: Ignoring delayed packet
[ 7.266723] .
[ 8.767333] DHCP/BOOTP: Ignoring delayed packet
[ 12.508941] ., OK
[ 14.017211] IP-Config: Got DHCP answer from 0.0.0.0, my address is 192.168.1.14
[ 14.024993] AIRVOD __dev_change_flags net/core/dev.c ret = 0
[ 14.031341] AIRVOD __dev_change_flags net/core/dev.c ret = 0
[ 14.037750] wl1271: mac80211 configure filter
[ 14.037750] wl1271: waking up chip from elp
[ 14.037872] wl1271: mac80211 configure filter
[ 14.532409] wl1271: ERROR ELP wakeup timeout!
[ 14.537017] wl1271: waking up chip from elp
[ 15.032409] wl1271: ERROR ELP wakeup timeout!
[ 15.037017] wl1271: mac80211 remove interface
[ 15.037017] wl1271: down
[ 15.037139] wl1271: mac80211 stop
[ 15.037170] AIRVOD __dev_change_flags net/core/dev.c ret = 0
[ 15.043975] IP-Config: Complete:
[ 15.047180] device=eth0, addr=192.168.1.14, mask=255.255.255.0, gw=192.168.1.1,
[ 15.055328] host=192.168.1.14, domain=, nis-domain=(none),
[ 15.061614] bootserver=0.0.0.0, rootserver=192.168.1.4, rootpath=, mtu=576
[ 15.070037] Looking up port of RPC 100003/2 on 192.168.1.4
[ 15.153350] Looking up port of RPC 100005/1 on 192.168.1.4
[ 15.431274] device: '0:12': device_add
[ 15.431427] PM: Adding info for No Bus:0:12
[ 15.433990] VFS: Mounted root (nfs filesystem) on device 0:12.
[ 15.440368] Freeing init memory: 264K
[ 18.859985] udevd (110): /proc/110/oom_adj is deprecated, please use /proc/110/oom_score_adj instead.
[ 19.874969] device: 'wlan0': device_rename: renaming to 'wlan1'
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Ti's WL1271 on OMAP3EVM board with kernel version 2.6.36
[not found] ` <AANLkTikZD_1DUqkxQyGSLdaQS01Qg15+_TDkW3QuRuOt@mail.gmail.com>
@ 2010-11-11 11:56 ` Luciano Coelho
2010-11-11 14:51 ` raghunath
0 siblings, 1 reply; 8+ messages in thread
From: Luciano Coelho @ 2010-11-11 11:56 UTC (permalink / raw)
To: raghunath; +Cc: linux-wireless@vger.kernel.org
Hi,
On Thu, 2010-11-11 at 12:45 +0100, raghunath wrote:
> I am working on OMAP3EVM board with Mistral wl1271 daughter board and using
> linux kernel 2.6.36 I am using wl1271 drivers and getting this error pls
> Let me know if any thing is wrong..
[...]
> [ 2.614593] wl1271: mac80211 configure filter
> [ 2.614624] wl1271: acx group address tbl
> [ 2.614624] wl1271: cmd configure
> [ 2.615173] AIRVOD __dev_change_flags net/core/dev.c ret = 0
> [ 2.621398] wl1271: elp work
> [ 2.621398] wl1271: chip to elp
> [ 2.621459] wl1271: mac80211 configure filter
> [ 2.621490] wl1271: waking up chip from elp
> [ 3.118377] wl1271: ERROR ELP wakeup timeout!
> [ 3.122955] wl1271: mac80211 configure filter
> [ 3.122985] wl1271: waking up chip from elp
> [ 3.618469] wl1271: ERROR ELP wakeup timeout!
It seems that you need this patch:
http://git.kernel.org/?p=linux/kernel/git/luca/wl12xx.git;a=commit;h=e8f1046f716a71d3a4426a5103e39c70059b8d0a
--
Cheers,
Luca.
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: Ti's WL1271 on OMAP3EVM board with kernel version 2.6.36
2010-11-11 11:56 ` Luciano Coelho
@ 2010-11-11 14:51 ` raghunath
2010-11-11 15:09 ` Luciano Coelho
0 siblings, 1 reply; 8+ messages in thread
From: raghunath @ 2010-11-11 14:51 UTC (permalink / raw)
To: 'Luciano Coelho'; +Cc: linux-wireless
Hi Luca,
I applied the patch which u have mentioned, but there is no change.
Raghu
-----Original Message-----
From: linux-wireless-owner@vger.kernel.org [mailto:linux-wireless-owner@vger.kernel.org] On Behalf Of Luciano Coelho
Sent: Thursday, November 11, 2010 5:27 PM
To: raghunath
Cc: linux-wireless@vger.kernel.org
Subject: Re: Ti's WL1271 on OMAP3EVM board with kernel version 2.6.36
Hi,
On Thu, 2010-11-11 at 12:45 +0100, raghunath wrote:
> I am working on OMAP3EVM board with Mistral wl1271 daughter board and using
> linux kernel 2.6.36 I am using wl1271 drivers and getting this error pls
> Let me know if any thing is wrong..
[...]
> [ 2.614593] wl1271: mac80211 configure filter
> [ 2.614624] wl1271: acx group address tbl
> [ 2.614624] wl1271: cmd configure
> [ 2.615173] AIRVOD __dev_change_flags net/core/dev.c ret = 0
> [ 2.621398] wl1271: elp work
> [ 2.621398] wl1271: chip to elp
> [ 2.621459] wl1271: mac80211 configure filter
> [ 2.621490] wl1271: waking up chip from elp
> [ 3.118377] wl1271: ERROR ELP wakeup timeout!
> [ 3.122955] wl1271: mac80211 configure filter
> [ 3.122985] wl1271: waking up chip from elp
> [ 3.618469] wl1271: ERROR ELP wakeup timeout!
It seems that you need this patch:
http://git.kernel.org/?p=linux/kernel/git/luca/wl12xx.git;a=commit;h=e8f1046f716a71d3a4426a5103e39c70059b8d0a
--
Cheers,
Luca.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: Ti's WL1271 on OMAP3EVM board with kernel version 2.6.36
2010-11-11 14:51 ` raghunath
@ 2010-11-11 15:09 ` Luciano Coelho
2010-11-12 5:46 ` raghunath
0 siblings, 1 reply; 8+ messages in thread
From: Luciano Coelho @ 2010-11-11 15:09 UTC (permalink / raw)
To: ext raghunath; +Cc: linux-wireless@vger.kernel.org
On Thu, 2010-11-11 at 15:51 +0100, ext raghunath wrote:
> I applied the patch which u have mentioned, but there is no change.
Hmmm... Too bad. It looked like the same problem that was fixed in that
patch, but apparently it wasn't.
Which firmware version are you using? You can find that out by checking
the dmesg (grep for "firmware booted").
--
Cheers,
Luca.
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: Ti's WL1271 on OMAP3EVM board with kernel version 2.6.36
2010-11-11 15:09 ` Luciano Coelho
@ 2010-11-12 5:46 ` raghunath
2010-11-12 7:16 ` Levi, Shahar
0 siblings, 1 reply; 8+ messages in thread
From: raghunath @ 2010-11-12 5:46 UTC (permalink / raw)
To: 'Luciano Coelho'; +Cc: linux-wireless
I am using firmware version "wl1271: firmware booted (Rev 6.1.0.0.343)"
Raghu
-----Original Message-----
From: Luciano Coelho [mailto:luciano.coelho@nokia.com]
Sent: Thursday, November 11, 2010 8:40 PM
To: ext raghunath
Cc: linux-wireless@vger.kernel.org
Subject: RE: Ti's WL1271 on OMAP3EVM board with kernel version 2.6.36
On Thu, 2010-11-11 at 15:51 +0100, ext raghunath wrote:
> I applied the patch which u have mentioned, but there is no change.
Hmmm... Too bad. It looked like the same problem that was fixed in that
patch, but apparently it wasn't.
Which firmware version are you using? You can find that out by checking
the dmesg (grep for "firmware booted").
--
Cheers,
Luca.
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: Ti's WL1271 on OMAP3EVM board with kernel version 2.6.36
2010-11-12 5:46 ` raghunath
@ 2010-11-12 7:16 ` Levi, Shahar
2010-11-12 9:02 ` raghunath
0 siblings, 1 reply; 8+ messages in thread
From: Levi, Shahar @ 2010-11-12 7:16 UTC (permalink / raw)
To: raghunath, 'Luciano Coelho'; +Cc: linux-wireless@vger.kernel.org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^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: Ti's WL1271 on OMAP3EVM board with kernel version 2.6.36
2010-11-12 7:16 ` Levi, Shahar
@ 2010-11-12 9:02 ` raghunath
2010-11-12 10:58 ` Arik Nemtsov
0 siblings, 1 reply; 8+ messages in thread
From: raghunath @ 2010-11-12 9:02 UTC (permalink / raw)
To: 'Levi, Shahar', 'Luciano Coelho'; +Cc: linux-wireless
Hi Shahar/Luca,
Its constantly coming, I am building wl1271 sdio driver statically and I am running on OMAP3EVM board from Mistral
And running 2.6.36 kernel and wl1271 sits on MMC2 I have modified code to set PIN MUX and clock for MMC2 and WLAN_EN(GPIO 150)
And WLAN_IRQ(GPIO-149). I am able to download firmare successfully and get Static data from firmware and Chip ID after firmware
Download. With this I am assuming that code I modified for MMC2 on EVM is proper(correct me if I am worng) after that ware is
Failing ,in ELP wake up.
[ 2.603698] wl1271: acx ac cfg 1 cw_ming 31 cw_max 1023 aifs 7 txop 0
[ 2.603698] wl1271: cmd configure
[ 2.604125] wl1271: acx tid config
[ 2.604156] wl1271: cmd configure
[ 2.604583] wl1271: mac80211 bss info changed
[ 2.604644] wl1271: mac80211 configure filter
[ 2.604644] wl1271: mac80211 configure filter Airvod 1
[ 2.604675] wl1271: acx group address tbl
[ 2.604675] wl1271: cmd configure
[ 2.605133] wl1271: mac80211 configure filter Airvod 2
[ 2.605224] AIRVOD __dev_change_flags net/core/dev.c ret = 0
[ 2.611450] wl1271: elp work
[ 2.611480] wl1271: chip to elp
[ 2.611541] wl1271: mac80211 configure filter
[ 2.611541] wl1271: waking up chip from elp
[ 3.108551] wl1271: ERROR ELP wakeup timeout!
Raghu
-----Original Message-----
From: linux-wireless-owner@vger.kernel.org [mailto:linux-wireless-owner@vger.kernel.org] On Behalf Of Levi, Shahar
Sent: Friday, November 12, 2010 12:47 PM
To: raghunath; 'Luciano Coelho'
Cc: linux-wireless@vger.kernel.org
Subject: RE: Ti's WL1271 on OMAP3EVM board with kernel version 2.6.36
> -----Original Message-----
> From: linux-wireless-owner@vger.kernel.org [mailto:linux-wireless-
> owner@vger.kernel.org] On Behalf Of raghunath
> Sent: Friday, November 12, 2010 7:47 AM
> To: 'Luciano Coelho'
> Cc: linux-wireless@vger.kernel.org
> Subject: RE: Ti's WL1271 on OMAP3EVM board with kernel version 2.6.36
>
> I am using firmware version "wl1271: firmware booted (Rev 6.1.0.0.343)"
>
> Raghu
do you get it constantly or randomly?
Regards,
Shahar
N�����r��y���b�X��ǧv�^�){.n�+����{��*ޕ�,�{ay�\x1dʇڙ�,j
��f���h���z�\x1e�w���
���j:+v���w�j�m����
����zZ+�����ݢj"��!
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Ti's WL1271 on OMAP3EVM board with kernel version 2.6.36
2010-11-12 9:02 ` raghunath
@ 2010-11-12 10:58 ` Arik Nemtsov
0 siblings, 0 replies; 8+ messages in thread
From: Arik Nemtsov @ 2010-11-12 10:58 UTC (permalink / raw)
To: raghunath; +Cc: Levi, Shahar, Luciano Coelho, linux-wireless
On Fri, Nov 12, 2010 at 11:02, raghunath <raghunath@airvod.com> wrote:
> Hi Shahar/Luca,
>
> Its constantly coming, I am building wl1271 sdio driver statically and I am running on OMAP3EVM board from Mistral
> And running 2.6.36 kernel and wl1271 sits on MMC2 I have modified code to set PIN MUX and clock for MMC2 and WLAN_EN(GPIO 150)
> And WLAN_IRQ(GPIO-149). I am able to download firmare successfully and get Static data from firmware and Chip ID after firmware
> Download. With this I am assuming that code I modified for MMC2 on EVM is proper(correct me if I am worng) after that ware is
> Failing ,in ELP wake up.
>
Is it only ELP mode that's failing? You can test this by commenting
out these line in wl1271_elp_work():
wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
set_bit(WL1271_FLAG_IN_ELP, &wl->flags);
Regards,
Arik
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2010-11-12 10:58 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-11-11 11:16 Ti's WL1271 on OMAP3EVM board with kernel version 2.6.36 raghunath
[not found] ` <AANLkTikZD_1DUqkxQyGSLdaQS01Qg15+_TDkW3QuRuOt@mail.gmail.com>
2010-11-11 11:56 ` Luciano Coelho
2010-11-11 14:51 ` raghunath
2010-11-11 15:09 ` Luciano Coelho
2010-11-12 5:46 ` raghunath
2010-11-12 7:16 ` Levi, Shahar
2010-11-12 9:02 ` raghunath
2010-11-12 10:58 ` Arik Nemtsov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).