From: "Guy, Wey-Yi" <wey-yi.w.guy@intel.com>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: John Linville <linville@tuxdriver.com>,
"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: Re: [PATCH 2/2 v4] mac80211: add throughput based LED blink trigger
Date: Tue, 30 Nov 2010 07:30:13 -0800 [thread overview]
Message-ID: <1291131013.13968.1.camel@wwguy-ubuntu> (raw)
In-Reply-To: <1291103925.3624.1.camel@jlt3.sipsolutions.net>
Hi Johannes,
On Mon, 2010-11-29 at 23:58 -0800, Johannes Berg wrote:
> From: Johannes Berg <johannes.berg@intel.com>
>
> iwlwifi and other drivers like to blink their LED
> based on throughput. Implement this generically in
> mac80211, based on a throughput table the driver
> specifies. That way, drivers can set the blink
> frequencies depending on their desired behaviour
> and max throughput.
>
> All the drivers need to do is provide an LED class
> device, best with blink hardware offload.
>
> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
> ---
> v2: turn off LED when turning off radio
> v3: - use only data frames
> - fix update frequency to 1 second
> - use DIV_ROUND_UP
> v4: - allow using -1 for always blinking
> - run timer function once when enabling
>
> include/net/mac80211.h | 38 ++++++++++++++
> net/mac80211/ieee80211_i.h | 13 ++++
> net/mac80211/iface.c | 1
> net/mac80211/led.c | 121 +++++++++++++++++++++++++++++++++++++++++++++
> net/mac80211/led.h | 44 +++++++++++++---
> net/mac80211/rx.c | 3 +
> net/mac80211/tx.c | 3 +
> net/mac80211/util.c | 2
> 8 files changed, 216 insertions(+), 9 deletions(-)
>
> --- wireless-testing.orig/include/net/mac80211.h 2010-11-29 11:05:32.000000000 +0100
> +++ wireless-testing/include/net/mac80211.h 2010-11-30 08:57:13.000000000 +0100
> @@ -1852,11 +1852,26 @@ struct ieee80211_hw *ieee80211_alloc_hw(
> */
> int ieee80211_register_hw(struct ieee80211_hw *hw);
>
> +/**
> + * struct ieee80211_tpt_blink - throughput blink description
> + * @throughput: throughput in Kbit/sec
> + * @blink_time: blink time in milliseconds
> + * (full cycle, ie. one off + one on period)
> + */
> +struct ieee80211_tpt_blink {
> + int throughput;
> + int blink_time;
> +};
> +
> #ifdef CONFIG_MAC80211_LEDS
> extern char *__ieee80211_get_tx_led_name(struct ieee80211_hw *hw);
> extern char *__ieee80211_get_rx_led_name(struct ieee80211_hw *hw);
> extern char *__ieee80211_get_assoc_led_name(struct ieee80211_hw *hw);
> extern char *__ieee80211_get_radio_led_name(struct ieee80211_hw *hw);
> +extern char *__ieee80211_create_tpt_led_trigger(
> + struct ieee80211_hw *hw,
> + const struct ieee80211_tpt_blink *blink_table,
> + unsigned int blink_table_len);
> #endif
> /**
> * ieee80211_get_tx_led_name - get name of TX LED
> @@ -1932,6 +1947,29 @@ static inline char *ieee80211_get_radio_
> #else
> return NULL;
> #endif
> +}
> +
> +/**
> + * ieee80211_create_tpt_led_trigger - create throughput LED trigger
> + * @hw: the hardware to create the trigger for
> + * @blink_table: the blink table -- needs to be ordered by throughput
> + * @blink_table_len: size of the blink table
> + *
> + * This function returns %NULL (in case of error, or if no LED
> + * triggers are configured) or the name of the new trigger.
> + * This function must be called before ieee80211_register_hw().
> + */
> +static inline char *
> +ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw,
> + const struct ieee80211_tpt_blink *blink_table,
> + unsigned int blink_table_len)
> +{
> +#ifdef CONFIG_MAC80211_LEDS
> + return __ieee80211_create_tpt_led_trigger(hw, blink_table,
> + blink_table_len);
> +#else
> + return NULL;
> +#endif
> }
>
> /**
> --- wireless-testing.orig/net/mac80211/ieee80211_i.h 2010-11-29 11:05:32.000000000 +0100
> +++ wireless-testing/net/mac80211/ieee80211_i.h 2010-11-30 08:57:13.000000000 +0100
> @@ -23,6 +23,7 @@
> #include <linux/types.h>
> #include <linux/spinlock.h>
> #include <linux/etherdevice.h>
> +#include <linux/leds.h>
> #include <net/ieee80211_radiotap.h>
> #include <net/cfg80211.h>
> #include <net/mac80211.h>
> @@ -641,6 +642,17 @@ enum queue_stop_reason {
> IEEE80211_QUEUE_STOP_REASON_SKB_ADD,
> };
>
> +struct tpt_led_trigger {
> + struct led_trigger trig;
> + char name[32];
> + const struct ieee80211_tpt_blink *blink_table;
> + unsigned int blink_table_len;
> + struct timer_list timer;
> + bool running;
> + unsigned long prev_traffic;
> + unsigned long tx_bytes, rx_bytes;
> +};
> +
> /**
> * mac80211 scan flags - currently active scan mode
> *
> @@ -849,6 +861,7 @@ struct ieee80211_local {
> #ifdef CONFIG_MAC80211_LEDS
> int tx_led_counter, rx_led_counter;
> struct led_trigger *tx_led, *rx_led, *assoc_led, *radio_led;
> + struct tpt_led_trigger *tpt_led_trigger;
> char tx_led_name[32], rx_led_name[32],
> assoc_led_name[32], radio_led_name[32];
> #endif
> --- wireless-testing.orig/net/mac80211/led.c 2010-11-29 11:05:32.000000000 +0100
> +++ wireless-testing/net/mac80211/led.c 2010-11-30 08:57:13.000000000 +0100
> @@ -103,6 +103,13 @@ void ieee80211_led_init(struct ieee80211
> local->radio_led = NULL;
> }
> }
> +
> + if (local->tpt_led_trigger) {
> + if (led_trigger_register(&local->tpt_led_trigger->trig)) {
> + kfree(local->tpt_led_trigger);
> + local->tpt_led_trigger = NULL;
> + }
> + }
> }
>
> void ieee80211_led_exit(struct ieee80211_local *local)
> @@ -123,6 +130,11 @@ void ieee80211_led_exit(struct ieee80211
> led_trigger_unregister(local->rx_led);
> kfree(local->rx_led);
> }
> +
> + if (local->tpt_led_trigger) {
> + led_trigger_unregister(&local->tpt_led_trigger->trig);
> + kfree(local->tpt_led_trigger);
> + }
> }
>
> char *__ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
> @@ -156,3 +168,112 @@ char *__ieee80211_get_rx_led_name(struct
> return local->rx_led_name;
> }
> EXPORT_SYMBOL(__ieee80211_get_rx_led_name);
> +
> +static unsigned long tpt_trig_traffic(struct ieee80211_local *local,
> + struct tpt_led_trigger *tpt_trig)
> +{
> + unsigned long traffic, delta;
> +
> + traffic = tpt_trig->tx_bytes + tpt_trig->rx_bytes;
> +
> + delta = traffic - tpt_trig->prev_traffic;
> + tpt_trig->prev_traffic = traffic;
> + return DIV_ROUND_UP(delta, 1024 / 8);
> +}
> +
> +static void tpt_trig_timer(unsigned long data)
> +{
> + struct ieee80211_local *local = (void *)data;
> + struct tpt_led_trigger *tpt_trig = local->tpt_led_trigger;
> + struct led_classdev *led_cdev;
> + unsigned long on, off, tpt;
> + int i;
> +
> + if (!tpt_trig->running)
> + return;
> +
> + mod_timer(&tpt_trig->timer, round_jiffies(jiffies + HZ));
> +
> + tpt = tpt_trig_traffic(local, tpt_trig);
> +
> + /* default to just solid on */
> + on = 1;
> + off = 0;
> +
> + for (i = tpt_trig->blink_table_len - 1; i >= 0; i--) {
> + if (tpt_trig->blink_table[i].throughput < 0 ||
> + tpt > tpt_trig->blink_table[i].throughput) {
> + off = tpt_trig->blink_table[i].blink_time / 2;
> + on = tpt_trig->blink_table[i].blink_time - off;
> + break;
> + }
> + }
I know it is the case for iwlwifi today, but is true "on time" == "off
time"?
Wey
next prev parent reply other threads:[~2010-11-30 15:31 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-27 19:03 [PATCH 2/2] mac80211: add throughput based LED blink trigger Johannes Berg
2010-11-27 19:20 ` [PATCH 2/2 v2] " Johannes Berg
2010-11-28 12:26 ` [PATCH 2/2 v3] " Johannes Berg
2010-11-29 16:13 ` Guy, Wey-Yi
2010-11-29 16:50 ` Johannes Berg
2010-11-29 17:08 ` Guy, Wey-Yi
2010-11-30 7:58 ` [PATCH 2/2 v4] " Johannes Berg
2010-11-30 15:30 ` Guy, Wey-Yi [this message]
2010-11-30 15:35 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291131013.13968.1.camel@wwguy-ubuntu \
--to=wey-yi.w.guy@intel.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox